Инструкции По Установке для Adtran 4305
Unit Installation
NetVanta 4305 Hardware Installation Guide
42
Copyright © 2006 ADTRAN, Inc.
61200890L1-34H
Mounting Options
The NetVanta 4305 may be installed in a tabletop, wallmount, or 19-inch rackmount configuration. The
following sections provide step-by-step instructions for rack mounting and wall mounting.
following sections provide step-by-step instructions for rack mounting and wall mounting.
Rack Mounting NetVanta 4305
The NetVanta 4305 is housed in a 1U-high, rack-mountable chassis which can be installed into 19-inch
equipment racks. Follow these steps to mount the NetVanta 4305 in a rack:
equipment racks. Follow these steps to mount the NetVanta 4305 in a rack:
If you have purchased the VPN accelerator card, install it first. See Installing the
NetVanta VPN Accelerator Card (P/N 1202368L1) on page 47.
NetVanta VPN Accelerator Card (P/N 1202368L1) on page 47.
Instructions for Rack Mounting NetVanta
Step
Action
1
Position the NetVanta 4305 in a stationary equipment rack. This unit occupies 1U of space. To
allow proper grounding, scrape the paint from the rack around the mounting holes where the
NetVanta 4305 will be positioned.
allow proper grounding, scrape the paint from the rack around the mounting holes where the
NetVanta 4305 will be positioned.
2
Have an assistant hold the unit in position as you install two mounting bolts through the unit’s
brackets and into the equipment rack using a #2 phillips-head screwdriver.
brackets and into the equipment rack using a #2 phillips-head screwdriver.
3
Proceed to the steps given in Supplying Power to the Unit on page 44.
Be careful not to compromise the stability of the equipment mounting rack when installing
this product.
this product.