Руководство Пользователя для Netopia 2e-h

Cayman 2E-H User’s Guide

Using the Command Line Interface

November 2000

This section describes the keywords and arguments for the various 
CONFIG commands.

set bncp option {on | off }

Enables or disables bridging over a PPP link. Typically used when the 
PPP peer doesn't support IPCP encapsulation.

Bridging lets the Cayman 2E-H use MAC (Ethernet hardware) 
addresses to forward non-TCP/IP traffic from one network to 
another. When bridging is enabled, the Cayman 2E-H maintains a 
table of up to 255 MAC addresses. Entries that are not used within 10 
minutes are dropped. If the bridging table fills up, the oldest table 
entries are dropped to make room for new entries.

set bridge option { on | off }

Enables or disables bridging services in the Cayman 2E-H. You must 
enable bridging services within the Cayman 2E-H before you can 
enable bridging for a specific interface.

set bridge ethernet [ A | B ] option { on | off }

Enables or disables bridging services for the Ethernet interface. 

set bridge ethernet [ A | B ] filters pppoe-only 

{ on | off }

Enables or disables bridging services for the specified Ethernet 
interface. 

set bridge interwan-bridging { on | off }

Enables or disables bridging between remote networks.