Руководство Пользователя для Netopia 2e-h-w
Cayman 2E-H-W User’s Guide
Configuring Your Cayman 2E-H-W
November 2000
3-23
number of seconds specified in the
Idle Timeout field. If you
choose a connection type of
Always On, the Cayman 2E-H-W
keeps the PPP link open at all times.
4.
If you specified a connection type of Instant On, specify
the number of seconds, in the range 30-600, you want the
Cayman 2E-H-W to wait before shutting down the PPP
link.
the number of seconds, in the range 30-600, you want the
Cayman 2E-H-W to wait before shutting down the PPP
link.
The default is 300 seconds.
5.
Enter the IP address of the Cayman 2E-H-W’s WAN
Ethernet port in the
Ethernet port in the
Local Address field.
The default value for the
Local Address field is 0.0.0.0,
which indicates that the virtual PPP interface will use the IP
address assigned to it by the remote peer. Note that the
remote peer must be configured to supply an IP address to
your Cayman 2E-H-W if you enter 0.0.0.0 in the
address assigned to it by the remote peer. Note that the
remote peer must be configured to supply an IP address to
your Cayman 2E-H-W if you enter 0.0.0.0 in the
Local
Address field.
If you specify an IP address other than 0.0.0.0, your Cayman
2E-H-W will not negotiate its IP address with the remote
peer. If the remote peer does not accept the IP address you
specify in the
2E-H-W will not negotiate its IP address with the remote
peer. If the remote peer does not accept the IP address you
specify in the
Local Address field, the link will not come up.
6.
Enter the IP address of the peer on the other end of the
PPP link in the
PPP link in the
Peer Address field.
The default value for the
Peer Address field is 0.0.0.0, which
indicates that the virtual PPP interface will accept the IP
address returned by the remote peer. If you enter 0.0.0.0,
the peer system must be configured to supply this address.
address returned by the remote peer. If you enter 0.0.0.0,
the peer system must be configured to supply this address.
If you specify an IP address other than 0.0.0.0, your Cayman
2E-H-W will not negotiate the remote peer's IP address. If
the remote peer does not accept the address in the
2E-H-W will not negotiate the remote peer's IP address. If
the remote peer does not accept the address in the
Peer
Address field as its IP address (typically because it has been
configured with another IP address), the link will not come
up.
configured with another IP address), the link will not come
up.
7.
Use the
NAT On/Off radio buttons to specify whether you
want the Cayman 2E-H-W to use network address
translation for traffic over the PPP link.
translation for traffic over the PPP link.