Руководство Пользователя для Netopia 2e-w

Cayman 2E-W User’s Guide

Diagnostic Console

November 2000

revert

The 

revert

 command retrieves the saved version of settings from 

non-volatile storage and overwrites any changes made since the last 
save.

save

The 

save

 command saves the EPROM settings you have entered or 

changed to non-volatile storage in the Cayman 2E-W.

show

The 

show

 command displays the current EPROM settings for the 

Cayman 2E-W and a brief explanation of those settings. For example, 
the show command produces the following:

BootPROM> show

flash on

(flash will be tried)

ip  0

(no ip address; tftp will not be tried) 

file <unset>

(must be set for tftp download)

bootp on

(will attempt configuration via bootp)

autoboot  10

(will autoboot on powerup, and will try

10 times)

autoprog never

(will never program a downloaded

image into flash)

Cayman 2E-W serial no. 800700, h/w rev. 1, eprom v1.3 

Last install status: code flash successfully programmed 

flash image 1: Cayman 2E-W 5.3.0

The following commands specify boot settings for the Cayman 2E-W.

autoboot { retry_count | off }

The 

autoboot

 

 command (where 

 is any 

whole number) sets the number of times the Cayman 2E-W should 
attempt to start an image and run it when powered up. If you enable 
autoboot with the 

autoboot retry_count

 command, the autoboot