Руководство Пользователя для Netopia 2e-w
Cayman 2E-W User’s Guide
Configuring Your Cayman 2E-W
November 2000
3-15
QuickStart (PPPoE
On)
On)
If your Cayman 2E-W is configured to use PPPoE (PPP over Ethernet)
framing, the PPPoE QuickStart window (Figure 3-6) opens when you
click the
framing, the PPPoE QuickStart window (Figure 3-6) opens when you
click the
QuickStart button on the Cayman 2E-W Home Page.
Figure 3-6
QuickStart Window (PPPoE On)
To configure the PPPoE QuickStart window:
1.
Enter the name of your Cayman 2E-W in the
System Name
field.
Each Cayman 2E-W is assigned a name as part of its factory
initialization. The default name for a Cayman 2E-W consists of
the word “Cayman-2E” and the serial number of the device.
initialization. The default name for a Cayman 2E-W consists of
the word “Cayman-2E” and the serial number of the device.
2.
Enter the identifier for your Cayman 2E-W on your
HomeRF or 802.11 wireless network in the
HomeRF or 802.11 wireless network in the
Wireless ID
field.
HomeRF wireless network – The default HomeRF wireless
ID for a Cayman 2E-W consists of two four-digit numbers,
which are located on the label on the bottom of your
Cayman 2E-W. You must configure other devices on your
wireless network to use this identifier before they can
communicate with your Cayman 2E-W.
ID for a Cayman 2E-W consists of two four-digit numbers,
which are located on the label on the bottom of your
Cayman 2E-W. You must configure other devices on your
wireless network to use this identifier before they can
communicate with your Cayman 2E-W.