Руководство Пользователя для Netopia 3220-h

Using the Command Line Interface

Cayman 3220-H User’s Guide

December 2000

set ip gateway default ip_address

Specifies the IP address of the default IP gateway. Only used if you 
specify that the gateway can be reached at a fixed IP address and not 
through a PPP virtual circuit.

Use the following command to configure settings for routing 
between WAN  connections.

set ip interwan-routing { on | off }

Enables or disables routing between WAN connections.

Use the following commands to configure settings for routing IP over 
a virtual PPP interface.

set ip ip-ppp vccn option { on | off }

Enables or disables IP routing through the virtual PPP interface. By 
default, IP routing is turned off. You must enable IP routing before 
you can enter other IP routing settings for the virtual PPP interface. 
If you turn off IP routing and save the new configuration, the 
Cayman 3220-H clears IP routing settings.

set ip ip-ppp vccn address ip_address

Assigns an IP address to the virtual PPP interface. If you specify an IP 
address other than 0.0.0.0, your Cayman 3220-H will not negotiate 
its IP address with the remote peer. If the remote peer does not 
accept the IP address specified in the 

 argument as valid, 

the link will not come up.

The default value for the 

 argument is 0.0.0.0, which 

indicates that the virtual PPP interface will use the IP address 
assigned to it by the remote peer. Note that the remote peer must be 
configured to supply an IP address to your Cayman 3220-H if you 
enter 0.0.0.0 for the 

 argument.