Руководство Пользователя для Netopia 3220-h

Using the Command Line Interface

Cayman 3220-H User’s Guide

December 2000

When Van Jacobson header compression is turned on, your Cayman 
3220-H allocates memory for 16 slots (headers) by default. The 
number of slots may be reduced during link configuration if the 
remote peer can only support a lower number.

set ip ip-ppp ipcp-subnet { on | off }

Specifies whether you want your Cayman 3220-H to negotiate 
allocation of an IP subnet, rather than a single IP address, from a 
remote access server. You should only enable this feature if you are 
told to do so by your Internet Service Provider.

sset ip ip-ppp vccn rip-send { off | v1 | v2 | v1-compat }

Specifies whether the Cayman 3220-H should use Routing 
Information Protocol (RIP) broadcasts to advertise its routing tables 
to routers on the other side of the PPP link. RIP Version 2 (RIP-2) is 
an extension of the original Routing Information Protocol (RIP-1) 
that expands the amount of useful information in the RIP packets. 
While RIP-1 and RIP-2 share the same basic algorithms, RIP-2 
supports several new features, including inclusion of subnet masks 
in RIP packets and implementation of multicasting instead of 
broadcasting (which reduces the load on hosts which do not 
support routing protocols).

This command is only available when address mapping for the 
specified virtual circuit is turned off.

set ip ip-ppp vccn rip-receive 

{ off | v1 | v2 | v1-compat }

Specifies whether the Cayman 3220-H should use Routing 
Information Protocol (RIP) broadcasts to update its routing tables 
with information received from other routers on the other side of 
the PPP link.

This command is only available when address mapping for the 
specified virtual circuit is turned off.