Руководство Пользователя для Netopia 3220-h

Using the Command Line Interface

Cayman 3220-H User’s Guide

December 2000

set PPP module vccn configure-max integer

Specifies the maximum number of unacknowledged configuration 
requests that your Cayman 3220-H will send. The integer argument 
can be any number between 1 and 10. The default value for the 
integer argument is 10.

set PPP module vccn terminate-max integer

Specifies the maximum number of unacknowledged termination 
requests that your Cayman 3220-H will send before terminating the 
PPP link. The integer argument can be any number between 1 and 
10. The default value for the integer argument is 2.

set PPP module vccn restart-timer integer

Specifies the number of seconds the Cayman 3220-H should wait 
before retransmitting a configuration or termination request. The 
integer argument can be any number between 1 and 30. The default 
value for the integer argument is 3 seconds. You can reduce the 
restart timer value if your link is relatively fast (28,800 bps or 
greater). Conversely, you should increase the restart timer value for 
slow links.

set PPP module vccn connection-type 

{ instant-on | always-on }

Specifies whether a PPP connection is maintained by the Cayman 
3220-H when it is unused for extended periods. If you specify 

always-on

, the Cayman 3220-H never shuts down the PPP link. If 

you specify 

instant-on

, the Cayman 3220-H shuts down the PPP 

link after the number of seconds specified in the 

time-out

 setting 

(below) if no traffic is moving over the circuit.

set PPP module vccn time-out integer

If you specified a connection type of 

instant-on

, specifies the 

number of seconds, in the range 30-600, the Cayman 3220-H should 
wait for communication activity before terminating the PPP link. The 
default is 300 seconds.