Справочное Руководство для Netopia r3100-u

■

If you are configuring an ISDN or a Dual Analog router, you will see the 

 shown below.

If you select ISP Automation, Smar tStar t offers you the option of choosing one of several Netopia ISP 
par tners that suppor t the Netopia R3100. You then see the 

.

If you select Manual Entry, you must be prepared with the following information. You must enter:

■

Your dial-up number, sometimes referred to as an ISP POP number

■

Your Login name and Password. (These are case-sensitive.)

■

Any PBX or Centrex phone system dialing prefix (such as “9” for an outside line)

■

Your PPP authentication method. Options are: PAP (Password Authentication Protocol), CHAP (Challenge 
Handshake Authentication Protocol), or None. Most ISPs use PAP; this is the default.

■

Your Domain Name Ser ver (DNS); this entr y must be an IP address in dotted decimal format. (for example, 
192.168.4.10, not “joe.isp.com”)

Additional ISDN Configuration screen. For ISDN dial-up 
connections, enter your Director y Numbers (DNs) and for 
Nor th America only, Ser vice Profile Identifiers (SPIDs).

Your telephone company should have provided this 
information on an information sheet when your ISDN line 
was installed.

If no additional ISDN configuration information is needed, 
this screen will not appear. Skip to 

 below.

Note: For some switch types, or if you have an 
international router without the Smar tPhone feature, 
fewer fields are shown in this screen.

When you have done this, click Next.

 shown below will appear.

Manual or Automated Connection Profile screen. The 
Smar tStar t Wizard asks you to select a method of 
creating a connection profile. The connection profile tells 
your router how to communicate with your ISP or other 
remote site, such as your corporate office. You can select 
either ISP Automation or Manual Entry.

Options are explained below.

Make your selection and click Next.