Справочное Руководство для Netopia r3100-u

8.

Select Telco Options and press return. the Telco Options screen appears.

Note: For IDSL routers, which do not initiate dial-up connections, this option does not appear.

Select Dial and press Return. A pop-up menu appears. You can select the dialing options for this 
Connection Profile as Dial In Only, Dial Out Only, or Dial In/Out. 

You can:

■

select a type of data ser vice to initiate, 64 kb/sec (the default), 56 kb/sec, or Speech

■

add the number to dial for this Connection Profile

■

add an alternate number

■

change any of the default parameter settings

■

) you 

can set the Maximum connect time for this connection profile by entering the hours and minutes in 
HH:MM format. When aggregate usage for this profile reaches this threshold, the profile becomes tem-
porarily disabled until the limit is raised or the counters are reset (see 

). If Call Accounting is not enabled, this field does not appear.

When you are finished with these entries, press Escape to return to the Add Connection Profile screen.

9.

Select ADD PROFILE NOW and press Return. Your new Connection Profile will be added.

                                 Telco Options

         Initiate Data Service...           64 kb/sec

         Dial...                            Dial In/Out

         Number to Dial:
         Alternate Site to Dial:

         Dial on Demand:                    Yes
         Idle Timeout (seconds):            300

         CNA Validation Number:
         Callback:                          No

         Maximum connect time (HH:MM):      0:00

Return/Enter to select data rate/class of service.
In this Screen you configure options for the ways you will establish a link.