Справочное Руководство для Netopia r3100-u

When using Frame Relay datalink encapsulation on a permanent circuit, you may require that the frame relay 
DLCIs explicitly match up to your connection profile, or you may allow your Frame Relay network to automatically 
confirm this by using the Default Profile.

The Default Profile screen controls whether or not an IDSL link will come up without an explicitly configured 
connection profile. See 

 for more information. You access the 

Default Profile screen from the Main Menu by selecting WAN Configuration and then selecting Default Profile. 

The Default Profile screen appears.

■

You can set Must Match a Defined Profile item to Yes or No (the default). This item controls whether or 
not the IDSL link will come up without an explicitly configured connection profile. If your ISP is ser ving you a 
dynamic IP Address, you need not explicitly configure a connection profile, and the default behavior of the 
router will be to connect automatically once it is powered on.

■

If Must Match a Defined Profile is set to No, then an IP Enabled item is visible. Toggling this item to Yes 
(the default) or No controls whether or not IP will be suppor ted on the IDSL link. If IP Enabled is set to Yes, 
an IP Parameters item becomes visible. If you select IP Parameters the IP Parameters screen appears 
(see 

). This screen allows you to configure various IP 

parameters for IDSL connections established without an explicitly configured connection profile.

■

If Must Match a Defined Profile is set to No, then an IPX Enabled item is visible. Toggling this item to Yes 
or No (the default) controls whether or not IPX will be suppor ted on the IDSL link. If IPX Enabled is set to 
Yes, an IPX Parameters item becomes visible. If you select IPX Parameters, the IPX Parameters screen 
appears (see 

). This screen allows you to configure 

various IPX parameters for IDSL connections established without an explicitly configured connection profile.

Main

Menu

WAN

Configuration

Default

Profile

                               Default Profile

         Must Match a Defined Profile:      Yes

         IP Enabled:                        Yes
         IP Parameters...

         IPX Enabled:                       Yes
         IPX Parameters...