Справочное Руководство для Netopia r6100

Once you have created your map lists and ser ver lists, for most Netopia Router models you must bind them to 
a profile, either a Connection Profile or the Default Profile. You do this in one of the following screens:

■

the 

screen (see below) of the Connection Profile configuration menu

■

the 

 screen (see 

) of the Default Profile configuration menu

■

the 

 screen (see 

To bind a map list to a Connection Profile, from the Main Menu go to the WAN Configuration screen then the 
Display/Change Connection Profile screen. From the pop-up menu list of your Connection Profiles, choose the 
one you want to bind your map list to. Select IP Profile Parameters and press Return.

The IP Profile Parameters screen appears.

Main

Menu

WAN

Configuration

IP Profile

Parameters

Display/Change

Connection Profile

                            IP Profile Parameters

         Address Translation Enabled:       Yes
         IP Addressing...                   Unnumbered

         NAT Map List...                    Easy-PAT List
         NAT Server List...                 Easy-Servers

         Local WAN IP Address:              206.1.1.6

         Remote IP Address:                 127.0.0.2
         Remote IP Mask:                    255.255.255.255

         Filter Set...                      NetBIOS Filter
         Remove Filter Set

         Receive RIP:                       Both

Return/Enter to select <among/between> ...
Configure IP requirements for a remote network connection here.