Дополнительное Руководство для Quantum p7000

Quantum ATL P7000 Unpacking Instructions
Document 6434006-02, Ver. 2, Rel. 0
August 2002

6

Preparing for the Installation

0

The installation site must have the following environmental 

conditions:
• Humidity: 20%-80% non-condensing
• Temperature: 15°C-32°C (59°F-90°F)
• Altitude: sea level to 10,000 feet
These environmental conditions apply when the library is in 

operation.

Preparing for the Installation

0

Before you begin the installation procedure in this section, make the 

following preparations as described in this section:
• Providing necessary tools and equipment for installation
• Taking ESD precautions

0

Provide the following tools for unpacking the library:
• Scissors
• Ratchet with 15/16 inch socket (or 15/16 inch open-end wrench)
Provide the following tools for removing the shipping restraints:
• #2 Phillips® screwdriver
• Tie  wrap
Provide the following tools for leveling the library:
• 3/4-inch open-end wrench
• Carpenter’s level

0

Some components within the ATL P7000 contain static-sensitive parts. 

To avoid damaging these parts while performing installation 

procedures, always observe the following precautions:
• Keep the library turned off during all installation procedures.

For additional library specifications (including 

environmental requirements during shipping and storage), 

see appendix A in the Quantum ATL P4000 and ATL P7000 

Tape Libraries User’s Guide.