Справочник Пользователя для Intel RS2BL080
Hardware
Intel® RAID Controller RS2BL080 Technical Product Specification
Figure 4 Intel
®
RAID Smart Battery AXXRSBBU7
2.3.6
Diagnostics
2.3.6.1
Audible Alarm
The audible alarm beeps when a drive fails and also during a rebuild. The drive failure alarm
beeps are:
beeps are:
Degraded array: Short tone, one second on, one second off.
Failed array: Long tone, three seconds on, one second off.
Hot spare commissioned: Short tone, one second on, three seconds off.
The drive failure tones repeat until the problem is corrected, or until the alarm is silenced or
disabled. The alarm can be silenced or disabled on the controller’s properties page in the BIOS
Console or by using the failed drive options pane in the Intel
disabled. The alarm can be silenced or disabled on the controller’s properties page in the BIOS
Console or by using the failed drive options pane in the Intel
®
RAID Web Console 2.
Silencing the alarm is temporary. If the cause of failure still exists or if an additional failure is
detected, then the alarm sounds again when the system is rebooted. Disabling the alarm is
persistent across errors and reboots. When the alarm is disabled, a failure does not cause it to
sound until it is re-enabled.
detected, then the alarm sounds again when the system is rebooted. Disabling the alarm is
persistent across errors and reboots. When the alarm is disabled, a failure does not cause it to
sound until it is re-enabled.
The build alarm tone functions differently. It remains ON during the rebuild. After the rebuild
completes, an alarm with a different tone sounds to signal that the rebuild is complete. This is a
one-time, non-repeating tone.
completes, an alarm with a different tone sounds to signal that the rebuild is complete. This is a
one-time, non-repeating tone.
2.3.6.2
LED Placement and Function
The Intel
®
RAID Controller RS2BL080 contains the following LEDs:
One surface-mounted heartbeat (“CRT1”) LED (Green Color) to indicate SAS2108
activity.
activity.
Another surface-mounted system error (“CRT2”) LED (Red Color) to indicate a board
error.
error.
Additional LED signaling is available through stake pin connectors on the controller.
Revision 1.0
Intel order number E64388-001
12