Release Note для AASTRA 53i
Other Interoperability Features
110
RN-001029-00, Rev 03, Release 2.1
IP Phone Release Notes 2.1
Configuring Symmetric UDP Signaling Using Configuration Files
You use the following parameter to configure symmetric UDP signaling in the
configuration files:
configuration files:
sip symmetric udp signaling
Parameter –
sip symmetric udp signaling
sip symmetric udp signaling
Configuration Files aastra.cfg, <mac>.cfg
Description
Allows you to enable or disable the phone to use port 5060 to send SIP
UDP messages. The value “1” (which is the default) enables the phone
to use port 5060. The value “0” (zero) disables the phone from using
port 5060 and allows the phone to choose a random port to send SIP
UDP messages.
UDP messages. The value “1” (which is the default) enables the phone
to use port 5060. The value “0” (zero) disables the phone from using
port 5060 and allows the phone to choose a random port to send SIP
UDP messages.
Format
Boolean
Default Value
1 (enabled)
Range
0 (disabled)
1 (enabled)
1 (enabled)
Example
sip symmetric udp signaling: 0