Инструкции По Установке для Enterasys mrx
INSTALLATION
Page 3-5
Figure 3-4. Flat Wall Mounting
3.
Select a wall location for the HUB within 7 feet of a power outlet.
WARNING: There is a potential SHOCK HAZARD if there is
electrical wiring within the wall that interferes with drilling for
pilot holes. Select a wall location where drilling pilot holes for the
Molly screws will not come in contact with electrical wiring in the
wall.
electrical wiring within the wall that interferes with drilling for
pilot holes. Select a wall location where drilling pilot holes for the
Molly screws will not come in contact with electrical wiring in the
wall.
4.
You will need a pencil for this step. With the wall mounting
brackets attached to the HUB, position the HUB against the wall
where it will be permanently mounted with the strain relief
bracket facing down. Using your pencil, mark the wall location
for the four pilot holes.
brackets attached to the HUB, position the HUB against the wall
where it will be permanently mounted with the strain relief
bracket facing down. Using your pencil, mark the wall location
for the four pilot holes.