Руководство Пользователя для Enterasys 6000

 for a functional description of each screen field.

To set the Reset Peak Switch Utilization field to YES or NO, proceed as follows:

1. Use the arrow keys to highlight the Reset Peak Switch Utilization field.

2. Press the SPACE bar to select YES or NO.

3. Use the arrow keys to highlight the SAVE command at the bottom of the screen.

4. Press ENTER. The message “SAVED OK” displays and the Reset Peak Utilization counter 

resets to zero.

CPU Type 
(Read-Only)

See which microprocessor is used in the switch module.

Flash Memory 
Installed 
(Read-Only)

See the amount of FLASH memory that is installed in the switch 
module and how much is currently available.

DRAM Installed 
(Read-Only)

See the amount of DRAM installed in the switch module and how 
much of it is currently available.

NVRAM Installed 
(Read-Only)

See the amount of NVRAM that is installed in the switch module and 
how much of it is currently available.

Current Switch 
Utilization 
(Read-Only)

See what percentage of the module switching capacity is currently 
being used.

Peak Switch 
Utilization 
(Read-Only)

See the peak percentage of module switching capacity used, since the 
last reset.

Reset Peak Switch 
Utilization 
(Toggle)

Reset the Peak Switch Utilization field. The switch may be set to either 
YES or NO as described in 

. YES resets the Peak Switch 

Utilization field to the current system utilization.