Руководство Пользователя для Marantz SR4003

ENGLISH

If you have already assigned the digital inputs, you 
can temporarily select the audio input mode for each 
input source as following procedures.
Press the AMP button and press the A/D button. 
When this button is pressed, the input mode is 
switched in the following sequence.
→ HDMI Auto → HDMI → Digital → Analog → HDMI 

Auto....

In HDMI Auto mode, the types of signals being input 
to the digital and analog input jacks for the selected 
input source are detected automatically.
If no digital signal is being input, the analog input 
jacks are selected automatically.
In Digital and HDMI mode, input is fixed to an 
assigned digital input terminal.
In analog mode, the analog input jacks are selected.
This selecting is temporary, so the result will not be 
stored in memory.
If you need to change the input mode completely, use 
INPUT SETUP in OSD menu system. (see page 21)

To select the surround mode during playback, press 
the  SURROUND MODE button on the front panel 
or the SURROUND MODE buttons on the remote 
controller.

Press the NIGHT button on the remote controller to 
turn on the NIGHT mode.
Selecting the Night Mode ON is effective in Dolby 
Digital only, and it compresses the dynamic range.
This softens loud passages such as sudden 
explosions, to help prevent disturbing others late at 
night.
To turn off the Night mode, press the NIGHT button 
again.

This jack may be used to listen to the unit’s output 
through a pair of headphones. Be certain that the 
headphones have a standard 1/4” stereo phono 
plug. 
Note that the speakers will automatically be turned 
off when the headphone jack is in use.

AAC

• When using headphones, the surround mode will 

change to BYPASS and Dolby Headphone by 
MENU and Cursor button.

• The surround mode returns to the previous setting 

as soon as the headphone plug is removed from the 
jack.

• The tone control function can not work through the 

headphones output.

This feature simulates the waveforms of the actual 
sounds heard from the speakers.
When headphones are used, the MENU button 
automatically switches to the Dolby headphone 
mode.
The OSD that appears when the MENU button is 
pressed is shown below.

     HEAD PHONE

DOLBY HP MODE : ON
SURROUND      : OFF

L LEVEL       :   0 dB
R LEVEL       :   0 dB

DOLDBY HP (Headphone) MODE can be selected 
with the left and right cursor buttons.
BYPASS → ON → BYPASS

 BYPASS:  Bypasses the Dolby headphone mode 

and delivers ordinary 2-channel stereo.

 

ON:  Dolby headphone mode active.

When the PURE DIRECT and SOURCE DIRECT 
mode is selected, Dolby surround processing is 
bypassed and “

✽✽✽” is displayed as the mode 

indication.

The surround mode can be selected when mode is 
ON.

L/R LEVEL can be set in the ±10 dB range.

•  The surround mode returns to the previous setting as 

soon as the plug is removed from the jack.

•  The Dolby Headphone function will not work when 

32 or 96 kHz PCM digital signals are input.

SR4003_U_01_E2_2.indd   27

SR4003_U_01_E2_2.indd   27

08.6.20   5:06:28 PM

08.6.20   5:06:28 PM