Руководство Пользователя для Marantz SR4003

ENGLISH

When this function is activated, the video or 
S-video signal can be emitted from the video, S-video 
or component video output terminal.
To activate this function, select VIDEO CONVERT in 
PREFERENCE menu and set ENABLE.

• The component video signal is emitted only from 

component video output terminal.

  When the video equipment is connected by 

component terminal, connect the monitor and the 
unit by the component terminal.

• This function is unavailable for the REC out 

terminal.

•  This function is unavailable for the still picture, fast 

forward and reverse playing of the video component.

•  If, while attempting to use the video convert feature, 

the unit cannot synchronize with the display device, 
“NO SIGNAL” appears on the monitor, or noise is 
generated, this feature cannot be used. All of these 
signs are caused by equipment incompatibility; there 
is nothing wrong with the unit.

  In such case, set VIDEO CONVERT in the 

PREFERENCE menu to DISABLE. Also, connect 
the video input signal to the display device via the 
MONITOR OUT terminal under VIDEO and the 
S-video input signal to the display device via the 
MONITOR OUT terminal under S-VIDEO.

Monitor is connected with the component.

AAC

S-VIDEO

VIDEO

COMPONENT

AAC

VIDEO

S-VIDEO

COMPONENT

The signal cannot be converted from the video to 
component or S-Video.

AAC

VIDEO

S-VIDEO

COMPONENT

The signal cannot be converted from the component 
to the video or S-video.

• The setup menu can be displayed through all video 

out (COMPONENT, S-VIDEO, VIDEO).

• The setting informations (e.g. volume setting) are 

displayed through all video out when the VIDEO 
CONVERT function are set ON.

No setting information is displayed when the 
signal is emitted from the COMPONENT IN to 
COMPONENT OUT.

• The setting informations (e.g. volume setting) are 

displayed through the S-VIDEO or VIDEO out 
when the VIDEO CONVERT function are set 
DISABLE. When the S-VIDEO and VIDEO outputs 
are used simultaneously, the setting informations are 
displayed through the S-VIDEO out only. 

AAC

VIDEO

S-VIDEO

HDMI

COMPONENT

AAC

VIDEO

S-VIDEO

HDMI

COMPONENT

HDMI: OSD menu is not displayed.
VIDEO/S-VIDEO/component: VIDEO CONVERT 
of HDMI is not possible, thus the OSD menu is not 
displayed.

When no video signal is connected to the unit or 
a DVD, etc., is connected directly to your TV, the 
unnecessary video circuit can be turned off by 
selecting the “VIDEO OFF” setting.
To select video off, press the AMP button and press 
the V.OFF button. 

AAC

SR4003_U_01_E2_2.indd   29

SR4003_U_01_E2_2.indd   29

08.6.20   5:06:29 PM

08.6.20   5:06:29 PM