Справочник для Zhone 5100
CHAPTER 4
IP services
IP services
132
Vpacket 5100/6100 Series Reference Manual
Viewing the SNMP trap destination table
You can view the SNMP trap destination table by issuing the show snmp trap destination
command. This command displays the SNMP trap destinations by IP address and community
name.
Syntax: show snmp trap destination
Example:
Syntax: show snmp trap destination
Example:
In this example, one SNMP trap destination is set to IP address 205.176.94.11 for port 8080. The
community name is yellow_alarm.
Telnet
Telnet is a supported application and you are able to customize the time-out value.
Setting the telnet time-out value
You can change the telnet time-out value for the current telnet session by issuing the set telnet
timeout command.
Syntax: set telnet timeout < 1-255>
Argument:
Syntax: set telnet timeout < 1-255>
Argument:
1-255
the time-out value in minutes
Example:
In this example, the telnet session is now set to time out after 25 minutes of inactivity.
VPacket# show snmp trap destination
----------------------- SNMP TRAP DESTINATIONS -------------------
Number of destinations 0
IP Address Port Community Name
205.176.94.11 8080 yellow_alarm
------------------------------------------------------------------
VPacket# set telnet timeout 25
VPacket#