Справочник Пользователя для Brother FAX-8070P

Before working with your application software that runs on DOS, check that the machine’s name 
appears in the printer selection of your application software. If the machine is not listed, you must 
install the printer driver that corresponds to HP LaserJet 5P’s emulations.

The following table shows the combination of printer driver and emulation mode. To get the most 
out of this machine, you should install an HP printer driver in your application software.

•

Be sure to choose the proper printer driver in your application software.

• Be sure the printing resolution is set to 600 dpi in your DOS application software.

The Remote Printer Console (RPC) is a utility program that can run in the DOS environment:

This program allows you to change various printer settings such as emulation, print quality, fonts, 
page setup etc., from your computer screen. Since most DOS applications have a Printer Settings 
menu that overrides the settings made by the RPC, you may not have to use this utility program. This 
utility program is useful for application software that does not control the printer’s settings and 
features.

Before you install the program, make sure you have the following hardware and software to install 
the program:

Follow these steps to install the remote printer console program:

Make sure the machine is connected to your computer.

Start your computer and go to the DOS prompt. If you are in Windows

®

, exit and return to the 

DOS prompt.

Insert the Brother CD-ROM into your CD-ROM drive (substitute your appropriate drive letter 
for “X”).

At the DOS prompt (C:\>) type X: (X is the letter of your CD-ROM drive) and press Enter.

Type CD DOS and press Enter.

Printer driver supported in your application 
software

Emulation mode to be selected with the remote 
printer console program

HP LaserJet 5P emulation mode

DOS

Version 3.3 or later

Monitor

EGA/VGA or compatible

Option

Mouse; the mouse driver must be installed.
(You can also operate the program with the keyboard.)

C:\>X:

X:\>CD DOS