Справочник Пользователя для Brother FAX-8070P

Скачать
Страница из 166
MAINTENANCE
  Troubleshooting and Maintenance   
119
18
Troubleshooting and Maintenance
Error Messages
You may occasionally encounter a difficulty with the machine or telephone line. If this happens, the 
machine often identifies the problem and displays an error message. The list below explains the most 
common error messages, in alphabetical order.
ERROR MESSAGE
CAUSE
ACTION
CHANGE DRUM SOON The drum unit is near the end of its 
life.
If you have a print quality 
problem, replace the drum unit 
with a new one.
CHANGE TONER
If the display shows CHANGE 
TONER
, you can still print. But the 
toner is depleted and the machine is 
telling you that the toner will soon 
run out.
Order a new toner cartridge now.
CHECK DOCUMENT Documents were not inserted or fed 
properly or document was too long.
Do not pull paper out until you see 
Document Jam, page 121
.
CHECK DRUM UNIT Drum unit is not installed.
Reinstall the drum unit.
CHECK PAPER
The machine is out of paper or paper 
is not properly loaded in the Multi-
purpose Sheet Feeder.
Refill the paper or remove the 
paper and load it again and then 
press Fax Start.
CHECK PAPER SIZE Paper Size is improper for fax 
receiving.
Load A4 paper in multi-purpose 
sheet feeder, and then press 
Fax Start.
COMM.ERROR
A poor quality phone line caused 
communications error.
Try the call again.
CONNECTION FAIL You tried to poll a fax machine that is 
not in Polled Waiting mode.
Verify the other party’s polling 
setup.
COOLING DOWN
WAIT FOR A WHILE
The temperature of the drum unit or 
toner cartridge is too hot. The 
machine will pause its current print 
job and go into cooling down mode. 
During the cooling down mode, you 
will hear the cooling fan running 
while the display on the machine 
shows COOLING DOWN and 
WAIT FOR A WHILE.
You must wait and allow the 
machine to resume printing when 
it is ready.
COVER OPEN
The top cover was not completely 
closed.
Open, then close, the cover.
DISCONNECTED
The other party or other party’s fax 
machine terminated the call.
Try to re-transmit or call the other 
party to see what happened.
MACHINE ERROR XX Machine has a mechanical problem.
Unplug the machine.
Then contact your Brother dealer 
for service.