Руководство Пользователя для Maytag mhwe200x

Not all Options are available with all Cycles.
Cycles and Options can be changed anytime before START/PAUSE 

is pressed. 

1. Press POWER/CANCEL. 
2. The washer powers down, the door unlocks, and clothes can be 

removed.

NOTE: If the water level or the temperature is too high, the washer 

will drain automatically before the door unlocks.

1. Press START/PAUSE once.
2. Press the desired OPTIONS. If the option is not available,  

the machine will beep. 

3. Press and hold START/PAUSE (for approximately 1 second)  

to continue the cycle.

NOTE: Press and hold FRESH SPIN™ option button (approx.  

1 second) to add periodic tumbling. See “Options” for complete 

cycle description. The light will glow when selected and will 

remain flashing for up to 6 hours or until the washer is stopped by 

either pressing POWER/CANCEL or opening the door.

1. Press START/PAUSE.
2. Press RINSE, DRAIN & SPIN.
3. Deselect 2ND RINSE Option.
4. Press and hold START/PAUSE (for approximately 1 second)  

to begin the drain.

5. When the spin is complete, the door unlocks. Items can be 

removed from the washer.

These lights show which portion of the cycle the washer is 

operating. They also indicate when you can add an additional  

item to the wash cycle and when the controls are locked.

You can add items to the washer after the wash cycle has started,  

if the Add Clothes status light is illuminated. All cycles have this 

feature except Rinse, Drain & Spin and Clean Washer with 

AFFRESH™ cycle. 
To add items
1. Press START/PAUSE. The washer door unlocks, and items can  

be added.

2. To continue the cycle, close the door and press and hold  

START/PAUSE (for approximately 1 second).

NOTE: To add garments after the Add Clothes period is over,  

the wash cycle needs to be canceled, the items added, and a  

new wash cycle started.

The Done light comes on after the cycle is complete. The light will 

stay on until door is opened.

Lock/Unlock Controls
This feature prevents unintended use of the washer and cycle or 

option changes during a cycle. When this light is illuminated, all 

buttons are disabled except for START/PAUSE and POWER/

CANCEL. You can lock the controls while the washer is in 

operation. 
To lock the controls 

Press and hold CYCLE SIGNAL option for 3 seconds.

The Controls Locked status light illuminates. 
To unlock the controls 

Press and hold CYCLE SIGNAL option for 3 seconds until the 

CONTROLS LOCKED Status light turns off. 

Depending on the stage of the wash cycle, the door locks and 

unlocks automatically. The status light indicates when the door is 

locked. To unlock, press START/PAUSE.