Руководство Пользователя для Maytag mhwe200x

Use this cycle to wash small loads of 2-3 lightly soiled garments that 

are needed in a hurry. This cycle combines fast-speed tumbling, a 

shortened wash time, and high-speed spin to shorten drying time. 

Large wash loads will result in the machine increasing the wash 

time. 

Use this cycle to wash sheer fabrics and lingerie. This cycle 

combines low-speed tumbling and low-speed spin for gentle fabric 

care.

■

Use mesh garment bags to wash undergarments such as 

underwire bras, items with strings, and small items such as 

socks.

Use this cycle to clean washable silk and ultra delicate garments 

(check label instructions to make sure the garment is washable.) 

This cycle gently tumbles and drains with the lowest spinning to 

gently clean garments and minimize wrinkling. Garments will 

contain a higher amount of water at the end of this cycle because of 

the low spin action.

Use this cycle to get a rinse and spin only. This cycle combines fast-

speed tumbling and ex high spin speed. If desired, you can reduce 

the spin speed by selecting the speed you want from the SPIN 

SPEED option.
Rinse is useful for:

■

Loads that need rinsing only.

■

Adding fabric softener to a load using the fabric softener 

dispenser.

Using Drain & Spin:
1. Select Rinse, Drain & Spin cycle.
2. Deselect 2nd Rinse option.

Use the Soak cycle to help remove set-in stains on fabrics. This 

cycle provides a soak time with warm or cold water followed by 

drain. Extra water, a short tumbling phase for equal distribution of 

the laundry, and a soaking time without drum movement improve 

the removal of set-in stains. Drain without spin assures gentle 

treatment, even for delicate articles.

Use the Clean Washer with AFFRESH™ cycle once a month to keep 

the inside of your washer fresh and clean. This cycle uses a higher 

water level in combination with AFFRESH

®

 washer cleaner tablet or 

chlorine bleach to thoroughly clean the inside of your washing 

machine. See “Cleaning Your Washer.” 
IMPORTANT: Do not place garments or other items in the washer 

during the Clean Washer with AFFRESH™ cycle. Use this cycle 

with an empty wash drum. 

As with any new product, you will hear sounds that you are not 

accustomed to. You may hear various sounds when the door is 

locked or unlocked, and during the washing, rinsing, or spinning 

process. Between changes in wash actions, there will be 

momentary pauses. You will hear water spraying and splashing 

during the wash and rinse cycles. These new sounds and pauses  

are part of normal washer operation. See “Troubleshooting.”

You can customize your wash by adding options to your cycle 

selections. You can add or change an option after starting a cycle 

anytime before the selected option begins. Not all Options are 

available with all cycles. 

cycle signal

dryness level

temperatures

■

See the “Laundry Guide” section for an overview of possible 

options for each Wash Cycle selection.

■

If an option is available with a selected cycle, the light for that 

option will illuminate when selected.

■

If an option is unavailable with a selected cycle, there will be a 

short tone and the light for that option will not illuminate when 

selected.

FRESH SPIN™ option

Use this option when you are not able to unload your clothes, soon 

after the wash cycle ends. This option provides periodic tumbling 

for up to 6 hours to help freshen your clothes. During this time, the 

“Done” indicator remains activated, the door remains locked, and 

the FRESH SPIN™ option indicator light will flash. The FRESH 

SPIN™ option will automatically stop and the door lock will be 

released after this time expires, or if you press POWER/CANCEL at 

anytime to unload your laundry.

Use this to begin the wash cycle later.

■

Press DELAY START until the desired time (in hours) shows in the 

estimated time remaining display.

■

Press START/PAUSE. The countdown to the wash cycle will show 
in the display window.

A 2nd rinse can be used to aid in the removal of detergent residue 

from garments. This option provides an additional rinse with the 

same water temperature as in the normal rinse. It is automatic for 

the Whites cycle. You may select or deselect by pressing 2ND 

RINSE.

Use this option to improve drying times for heavy fabrics or special 

care items. This options final spin increases to the highest speed and 

reduces excess water to save energy.

Each cycle has a preset water temperature setting. To change the 

water temperature, press the WASH TEMP button until the desired 

setting is illuminated.
Select a water temperature based on the type of load you are 

washing. Use the warmest wash water safe for fabrics. Follow 

garment label instructions.
The water temperature for all rinses are cold, which save energy.