Руководство Пользователя для Maytag mhwe300v

6. Check for leaks around faucets and inlet hoses.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, 
fire, or electrical shock.

WARNING

7. Plug into a grounded 3 prong outlet.
8. Read “Washer Use.”
9. To test and clean your washer, make sure there are no clothes in the washer and add one 

AFFRESH™ tablet to the washer drum. Select POWER/CANCEL, the Clean Washer cycle, 
and then select START/PAUSE. This cycle will take approximately 50 minutes to 
complete. Allow the washer to complete the entire Clean Washer Cycle without 
interruption.

Flexible electronic controls are easy to use whether, you are a beginner or an expert.

The Smart Dispensers make your washer truly automatic. This washer provides a three-
compartment dispenser which includes separate compartments for main wash detergent, 
fabric softener, and chlorine bleach. The dispenser has large pour zones. The dispenser is  
self-cleaning, and can be easily removed. Laundry products are diluted with fresh water and 
added to the load at the proper time in the wash cycle.

This cycle uses steam to raise the temperature of the unit and makes the washer self-cleaning, 
flushing the machine’s interior free of dirt and other residue. The use of AFFRESH™ washer 
cleaner or liquid chlorine bleach with this cycle will remove and help avoid odor-causing 
residue. 

This washer automatically adjusts water level for optimal cleaning and rinsing performance. 
Two sensors determine load size, load composition, and suds level, then the sensors adjust 
the water level to the proper setting. This eliminates guesswork. The water level is just right  
for every wash load size.

Since there is no agitator, you can wash larger, bulkier items such as a king-sized bedspread. 
You are also able to wash more clothes at one time, which means fewer loads.

To reduce washer “walk” and “off-balance” conditions, your new washer combines:

„

2 Springs to isolate vibration

„

4 Shock absorbers at the washer base to minimize movement

The commercial quality stainless steel drum eliminates corrosion and enables higher spin 
speeds for more water extraction, reducing drying time compared to traditional front-load 
washers.

Your new front-loading, high-efficiency washer saves time with fewer, larger loads, and lowers 
your water and energy bills by helping conserve resources.

This washer automatically selects the spin speed based on the cycle selected. This factory 
setting can be changed, however. This washer offers up to five different spin speed choices.

This washer has a heating element that automatically heats the water to the optimal 
temperature on select cycles. This enables stepped cleaning, a process in which warm water 
is brought in and mixed with detergent first, then the water is heated. Stepped cleaning starts 
the wash cycle with warm water to help remove stains (such as blood and grass). This heater is 
active in the Whitest Whites, Heavy Duty, and Normal/Casual cycles.

The automatic temperature control electronically senses and maintains a uniform water 
temperature. Automatic temperature control regulates incoming hot and cold water. 
Automatic temperature control is automatically turned on when a cycle is selected.

Clothes can be added to the load during the first 8 minutes of the cycle. During this time,  
the Status Indicator will indicate it is okay to add clothes. 

This washer channels 100% of the water through the dispensers to assure thorough rinse-out 
and mixture of all the laundry products before they touch any garments. The water is then 
sprayed from the top front onto the center of the load, providing even distribution, and 
optimum cleaning performance. It is normal for small amounts of water to remain in the 
dispensers when the wash cycle is complete.