Инструкции По Установке для IQinVision iqd30sv-f1

2.  Mount the IQeye Mini Dome camera base to the desired wall or ceiling 

surface using the supplied or equivalent mounting hardware.

3.  Remove the camera shroud by placing 

the palm over the top of the shroud, then 
gently squeezing the two tabs toward the 
front of the shroud toward the center of 
the camera. Pivot these tabs away from 
the camera then pull the shroud off the 
camera as shown in Image 6.4. 

4.  Set the field-of-view using the IQeye  

Mini Dome’s 3-axis gimbal.

5.  Focus the camera by twisting the fixed-focal length lens clockwise or counter-

clockwise to achieve the desired focus.

6.  Replace the camera shroud by first positioning the shroud against the rear 

shroud tab then pivoting the shroud down toward the front two mounting 
tabs. Squeeze the shroud gently and push it down to engage the front two 
mounting tabs.

7.  Replace the trim cover  

 Standard Camera Model: attach the camera trim 
cover to the camera by pushing it gently on to the 
camera. You should hear an audible SNAP as the 
trim ring fastens into place.