Инструкции По Установке для IQinVision iqd30sv-f1
9
8
Interior Vandal Camera Model: position the dome cover so the dome cover
screws line up with the matching receiving holes on the mounting plate.
Tighten the dome cover to the mounting plate using the supplied Torx T-10
security wrench.
screws line up with the matching receiving holes on the mounting plate.
Tighten the dome cover to the mounting plate using the supplied Torx T-10
security wrench.
Note: The cover fits in only one orientation. Do not apply excessive force
or damage to the trim cover may occur. If it does not push down easily on
to the camera, the cover may be flipped 180° from the correct orientation.
Remove the cover, flip it 180° and try again. An easy way to identify the
correct orientation is to look for the “Activity LED” hole in the trim ring
and align that on the same side of the camera as the Activity LED.
or damage to the trim cover may occur. If it does not push down easily on
to the camera, the cover may be flipped 180° from the correct orientation.
Remove the cover, flip it 180° and try again. An easy way to identify the
correct orientation is to look for the “Activity LED” hole in the trim ring
and align that on the same side of the camera as the Activity LED.
7. IQeye Mini Dome Single-Gang
Wall Mount Installation
Standard Camera Model
The IQeye Mini Dome Single-Gang Wall Mount Adapter
is designed to easily wall-mount the dome camera on any
single-gang electrical box, or to configure the IQeye Mini
Dome so that the dome is pointed downward.
is designed to easily wall-mount the dome camera on any
single-gang electrical box, or to configure the IQeye Mini
Dome so that the dome is pointed downward.
1. Pull the PoE Ethernet cable through the back slot
of the Wall Mount as shown in Image 7.1, and attach the
Wall Mount to a single-gang box or to a durable interior
wall surface using the supplied or equivalent hardware.
Wall Mount to a single-gang box or to a durable interior
wall surface using the supplied or equivalent hardware.
Image 7.1