Руководство Пользователя для Hussmann f6
1
A. Remove, bumpers, rails,
packing materials, splash-
packing materials, splash-
guards and other packaged
items from the case.
B. Remove shelves.
C. Remove back panels by lift-
ing up and out near the bottom.
D. Remove display racks and
pans from end to be joined.
E. Remove top access cover.
See Figure 2.
2
Level the case on top front rail
in the horizontal position and on
the back exterior in the vertical
position. After the case is
position. After the case is
properly shimmed and leveled
the gasket can be applied.
3
Apply
Gaskets (Items – 1, 2,
3, 4, 5
and
6)
as shown.
• Butt gaskets at lower corners.
• Check that there are no gaps
between gasket and the
between gasket and the
especially around corners.
• Remove paper backing before
gasket is applied.
gasket is applied.
See Figure 3 and Detail A.
2
P/N 0416185B
Merchandisers
®
HUSSMANN CORPORATION, Bridgeton, MO 3044-2483 U.S.A.
B
C
Packing Materials
A
D
E
Figure 2. Removing Items from Case