Руководство Пользователя для Kodak i1210

Скачать
Страница из 130
A-61560   January 2007
101
5 Maintenance
Cleaning the scanner
Your scanner needs to be cleaned periodically. If your documents do 
not feed easily, if several documents feed at the same time or if streaks 
appear on your images, it is time to clean your scanner. The section 
entitled, “Supplies and consumables” at the end of this chapter provide 
a listing of the supplies required to clean your scanner.
IMPORTANT: Use only non-flammable cleaners such as those provided 
through Kodak Parts Services. Do not use household 
cleaners and solvents.
Do not use cleaners in confined areas, use with adequate 
ventilation.
Do not use cleaners on hot surfaces. Allow surfaces to 
cool to ambient temperature before use.
Replacing parts
Kodak Scanners use replaceable tires that can feed a wide range of 
document types, sizes and thicknesses. Tire life and performance will 
vary based on the customer’s document set, the frequency of cleaning 
and transport and tires, and following the recommended schedule for 
changing tires. Nominal tire life is approximately 125,000 pages. Usage 
figures are not guaranteed. Customer-operating environments, 
document type, the condition of documents being scanned, and not 
following the recommended cleaning and replacement procedures, can 
cause the life of the consumables to vary. You should change the tires if 
you notice an increase in multiple feeds, stoppages, or a decrease in 
feeder performance that is not resolved by following the cleaning 
procedures.
NOTE: Certain paper types (such as carbonless paper or newsprint), 
failure to clean regularly, and/or use of non-recommended 
cleaning solvents can shorten roller life.