Руководство Пользователя для Kodak i1210

A-61560   January 2007

103

The separation module should be removed from the scanner for best 
cleaning results.

NOTE: When removing or cleaning the separation module, it may be 

easier to access the separation module if you remove the input 
tray. To remove the input tray, gently push the input tray to the 
left or right to release the pin from the slot, and lift it out of 
position.

1. Push the separation module release lever down and lift the 

separation module up and out of position.

2. Manually rotate and wipe the separation module tires with a roller 

cleaning pad.

3. Inspect the separation module.

If the separation module tires show signs of wear or damage, 
replace the tires or the separation module. See the next section for 
procedures.