Краткое Руководство По Установке для Lexmark P6250
Lexmark Confidential until announced
Note: Contents may vary.
6200 Series All-In-One
Lift the paper support and
extend the paper exit tray.
extend the paper exit tray.
Load plain paper.
*21B0070*
• Use only the power supply provided
with this product or the manufacturer's
authorized replacement power supply.
authorized replacement power supply.
• Connect the power supply cord to an
electrical outlet that is near the product
and easily accessible.
and easily accessible.
• Refer service or repairs, other than
those described in the user
documentation, to a professional
service person.
documentation, to a professional
service person.
CAUTION: Do not use the fax feature
during a lightning storm. Do not set up this
product or make any electrical or cabling
connections, such as the power supply
cord or telephone, during a lightning
storm.
during a lightning storm. Do not set up this
product or make any electrical or cabling
connections, such as the power supply
cord or telephone, during a lightning
storm.
Open the cartridge lids, insert the cartridges, and
snap the lids closed.
snap the lids closed.
1
2
3
Left:
Right:
Lower the paper feed guard,
squeeze the paper guide, and
slide it to the left edge of the paper.
squeeze the paper guide, and
slide it to the left edge of the paper.
3
2
1
Connect the power cord.
2
1
Make sure the
Power light is
on.
Power light is
on.
1
Prepare your All-In-One
2
1
Load paper
2
3
Unpack your All-In-One
2
Install the print cartridges
3
Close the scanner unit.
1
3
2
Press the right arrow button
to scroll to your language,
and then press Select
to scroll to your language,
and then press Select
.
2
1
3
4
Press Select to print an
alignment page.
alignment page.
You may discard the
alignment page after it
prints.
alignment page after it
prints.
Place the stored cartridge
in the storage area of your
All-In-One.
in the storage area of your
All-In-One.
Keep a new or
partially used
cartridge in the
print cartridge
storage unit:
partially used
cartridge in the
print cartridge
storage unit:
1
2
Cartridge storage
1
2
3
4
Prepare the print cartridges
Remove the sticker and tape from the print cartridges.
Warning: Do not touch the copper contact area on
the back or the metal print cartridge nozzles on the
bottom.
the back or the metal print cartridge nozzles on the
bottom.
2
1
1
2
1
2
Remove the photo
cartridge from the
print cartridge storage
unit.
cartridge from the
print cartridge storage
unit.
Lift the scanner unit.
1
5
Safety Information
If you are using your
All-In-One with a computer,
continue with “Install the
software”...
All-In-One with a computer,
continue with “Install the
software”...