Справочник Пользователя для JVC GR-DVP9
EN
63
Master Page: Right
This camcorder can be used as a WebCam via USB
connection.
connection.
* When connecting the cable, open the cover.
1
Make sure all necessary software (provided) are
installed in your PC and all units are turned off.
installed in your PC and all units are turned off.
2
Connect the camcorder to your PC using the USB
cable.
cable.
3
Set the VIDEO/MEMORY Switch to “MEMORY”.
4
Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
pressing down the Lock Button located on the
switch.
5
Turn on the PC.
● “
” appears on the screen.
● If the PC is not powered on, the camcorder
does not enter the Web Camera mode.
6
When finished, turn off the PC first, then the
camcorder. Disconnect the USB cable from the
camcorder and PC.
camcorder. Disconnect the USB cable from the
camcorder and PC.
NOTES:
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack. (
battery pack. (
● Use the provided software PIXELA ImageMixer to
capture video in real time.
● You can also use the camcorder for web
conference by using Microsoft Windows
®
NetMeeting
®
and signing up for MSN Hotmail.
● In the Web Camera mode, the following buttons
cannot be operated: E-MAIL, SNAPSHOT, INDEX/
NAVI, NAVI STORE, D.SOUND, the Recording
Start/Stop Button.
NAVI, NAVI STORE, D.SOUND, the Recording
Start/Stop Button.
Using The Camcorder As A
WebCam
WebCam
To USB
To USB
connector
USB cable
(provided)
USB-equipped PC
Connector Cover*
Refer to the instruction manuals of the PC and
provided Software.
provided Software.
GR-DVP9-8PAL.book Page 63 Friday, February 7, 2003 12:35 PM