Инструкция для Canon iPF9400

Menu items are as follows.
The printer menu is classified into regular menu items available when no print job is in progress and menu during print-
ing items only available while printing is in progress. 

Regular menu

Menu during printing

Not displayed

 as normal is displayed.

 as normal is displayed.

A limited 

 containing the following items is displayed.

Adj. Fine Feed (

)

*1: Only displayed in the menu during printing. Not displayed in the regular menu.

For details on the displayed menu hierarchy, 

The Paper Menu is not displayed during printing.

Setting Item

Description, Instructions

Select either sheets or rolls and load the paper.

Choose this item before removing loaded paper.

Chg. Paper Type (

)

Change the type of paper loaded. 

Choose On to print a barcode at the end of a roll before you remove it.
The printed barcode can be used in managing the amount of roll paper
left. Choose Off if you prefer not to print the barcode.

(The type of paper
is displayed here.)
(

Adjust the Printhead height. 

If you print on Japanese paper (washi) or other handmade paper that
has an irregular width, choose Loose for a higher skew detection
threshold, or choose Off to disable skew detection. However, if paper is
loaded askew when detection is Off, note that paper jams or Platen
soiling may occur.

Specify whether or not to cut with the standard round-bladed cutter.
If you choose Automatic, the roll will be cut automatically using the
Cutter Unit, depending on the printer driver settings.
Select Eject to prevent printed documents from falling immediately after
printing such as when you wait for the ink to dry, etc. Manual prints
lines at the cut position instead of cutting after printing. If you select
Manual, the setting screen for detection of the paper leading edge is
displayed.

Choose the cutting speed. The preset selection represents the optimal
cutting speed for the type of paper. We recommend keeping the preset
cutting speed.
If you use adhesive paper, choosing Slow helps prevent adhesive from
sticking to the cutter and keeps the cutter sharp.

iPF9400

                                                                                                                                                                                                                      

Menu Settings

                                                                                                                                                                                                                                        

Control Panel

Printer Menu

667