Справочное Руководство для LXE 1280
44
System Menu Option
LDS Plus Reference Guide
E-SW-LDSPLUSRG-G
DockedIO – Docked I/O Configuration
Function
The DockedIO parameter specifies which comm port to use as local input (for a barcode scanner)
and which one to use as local output (for a printer). This parameter only affects operation of the
MX1 and MX3 when they are docked. This parameter is valid for MX1 and MX3 only.
and which one to use as local output (for a printer). This parameter only affects operation of the
MX1 and MX3 when they are docked. This parameter is valid for MX1 and MX3 only.
The MX1 supports endcaps with an integrated scanner, an RS-232 port or both. A selection of a
DockedIO configuration that is not fully supported by the endcap will result in partial
functionality. The TE will not attempt to correct the selection.
DockedIO configuration that is not fully supported by the endcap will result in partial
functionality. The TE will not attempt to correct the selection.
The MX3 COM2 port supports both an IR port and an RS-232 port. The power is applied to the
port configured as input until the computer receives a print command. At that time, the power is
switched to the port configured as output. When the print command is completed, power is
returned to the input port. This configuration option allows dual scanning through a cradle.
port configured as input until the computer receives a print command. At that time, the power is
switched to the port configured as output. When the print command is completed, power is
returned to the input port. This configuration option allows dual scanning through a cradle.
Options
MX1
Valid options:
Not supported
COM1 RS-232
Not supported
COM1 Scanner
Not supported
COM2 IR
Not supported
RS-IN/OUT:IR:IN
COM1
RS-232
Input/Output
COM1 Scanner
N/A
COM2
IR
Input
IS-IN:IR-IN/OUT
COM1
RS-232
N/A
COM1 Scanner
Input
COM2 IR
Input/Output
RS-IN:IR-IN/OUT
COM1
RS-232
Input
COM1 Scanner
N/A
COM2
IR
Input/Output
IS&RS-IN:RS-OUT
COM1
RS-232
Output
COM1 Scanner
Input
COM2 IR
Input
Default setting: Not supported
2
Defaults to undocked configuration. See Normal IO.