Руководство Пользователя для LXE mx3
234
5380SF 2D Imager
Integrated Scanner Programming Guide
E-SW-SCANNERPG-L
Print Weight
Parameter Default Value:
4
Set Print Weight
Default Print Weight 4
Print Weight is used to adjust the way the imager reads Matrix symbols. If an imager will be seeing
consistently heavily printed Matrix symbols, then a print weight of 6 may improve the reading
performance. For consistently light printing, a print weight of 2 may help.
consistently heavily printed Matrix symbols, then a print weight of 6 may improve the reading
performance. For consistently light printing, a print weight of 2 may help.
To set a different print weight value than the default of 4, begin by scanning the Set Print Weight
barcode
barcode
Next, scan numeric barcodes that correspond to the desired print weight value using the “Symbols 0-
9” at the end of this chapter. Single digit numbers must have a leading zero e.g. scan “0” and “3” to
assign the value of 3 to this option.
9” at the end of this chapter. Single digit numbers must have a leading zero e.g. scan “0” and “3” to
assign the value of 3 to this option.
If you wish to change the print weight number selection, before scanning the Save barcode, scan the
Discard barcode on the “Symbols 0-9” page. Scan the Save barcode when you have finished setting
the correct print weight numeric value.
Discard barcode on the “Symbols 0-9” page. Scan the Save barcode when you have finished setting
the correct print weight numeric value.
Working Orientation
Parameter Default Value:
Upright
Upright Upside
Down
Rotate Clockwise 90°
Rotate Counterclockwise 90°
Some barcodes are direction sensitive. For example, Kix codes can misread when scanned sideways
or upside down.
or upside down.
Scan one of the orientation barcodes, then scan the Save barcode on the “Keypad Alphanumeric
Symbols” page.
Symbols” page.