Руководство Пользователя для LXE mx3
5380SF 2D Imager - Imager Parameters – Symbology Specific
285
E-SW-SCANNERPG-L
Integrated Scanner Programming Guide
Code 16K
Parameter Default Values:
Code
16K
Off
Code 16K Message Length
Minimum: 1 / Maximum: 160
Scan the Save barcode when you have finished setting each desired value.
Code 16K Off
Code 16K On
Default all Code 16K settings
Code 16K Message Length
Parameter Default Value:
Minimum 1 / Maximum 160
This option decodes a code type within a specified minimum and maximum range. Valid minimum
lengths and maximum lengths are between 0 and 160 characters.
lengths and maximum lengths are between 0 and 160 characters.
To set Code 16K Message minimum message length, first scan this barcode:
Minimum Message Length
Next, scan numeric barcodes that correspond to the desired minimum message value using the
“Symbols 0 - 9” at the end of this chapter.
“Symbols 0 - 9” at the end of this chapter.
If you wish to change your message length number selection, before scanning the Save barcode, scan
the Discard barcode on the “Symbols 0 - 9” page. Scan the Save barcode when you have finished
setting the correct minimum message numeric value.
the Discard barcode on the “Symbols 0 - 9” page. Scan the Save barcode when you have finished
setting the correct minimum message numeric value.
To set maximum message length, first scan this barcode:
Maximum Message Length
Next, scan numeric barcodes that correspond to the desired maximum message value using the
“Symbols 0 - 9” at the end of this chapter.
“Symbols 0 - 9” at the end of this chapter.