Руководство Пользователя для LXE mx3
286
5380SF 2D Imager
Integrated Scanner Programming Guide
E-SW-SCANNERPG-L
If you wish to change your message length number selection, before scanning the Save barcode, scan
the Discard barcode on the “Symbols 0 - 9” page. Scan the Save barcode when you have finished
setting the correct maximum message numeric value.
the Discard barcode on the “Symbols 0 - 9” page. Scan the Save barcode when you have finished
setting the correct maximum message numeric value.
Code 49
Parameter Default Values:
Code
49
On
Code 49 Message Length
Minimum: 1 / Maximum: 81
Scan the Save barcode when you have finished setting each desired value.
Code 49 Off
Code 49 On
Default all Code 49 settings
Code 49 Message Length
Parameter Default Value:
Minimum 1 / Maximum 81
This option decodes a code type within a specified minimum and maximum range. Valid minimum
lengths and maximum lengths are between 1 and 81 characters.
lengths and maximum lengths are between 1 and 81 characters.
To set Code 49 Message minimum message length, first scan this barcode:
Minimum Message Length
Next, scan numeric barcodes that correspond to the desired minimum message value using the
“Symbols 0 - 9” at the end of this chapter.
“Symbols 0 - 9” at the end of this chapter.
If you wish to change your message length number selection, before scanning the Save barcode, scan
the Discard barcode on the “Symbols 0 - 9” page. Scan the Save barcode when you have finished
setting the correct minimum message numeric value.
the Discard barcode on the “Symbols 0 - 9” page. Scan the Save barcode when you have finished
setting the correct minimum message numeric value.
To set maximum message length, first scan this barcode:
Maximum Message Length