Руководство Пользователя для LXE mx3
78
Symbol Barcodes
Integrated Scanner Programming Guide
E-SW-SCANNERPG-L
Trigger Mode
Scanner:
2223 1524 1224 1223 955 923 824
Note: LXE mobile devices with integrated scanners are designed to be operated in Level Trigger
Mode. LXE recommends leaving the Trigger Mode default value unchanged.
Parameter Default Value:
Level
Use this parameter to determine when the integrated laser is activated and decoding begins, how long
the laser remains on and what determines the cessation of the laser scan and decode process.
the laser remains on and what determines the cessation of the laser scan and decode process.
Select a trigger mode by scanning the appropriate barcode. If you wish to change your selection, scan
Cancel.
Cancel.
Level
A trigger pull or SCAN key press activates the laser and decode
processing. The laser remains on and decode processing continues
until a trigger release, a valid decode or the Laser On Time-out is
reached.
processing. The laser remains on and decode processing continues
until a trigger release, a valid decode or the Laser On Time-out is
reached.
Level
Pulse
A trigger pull or SCAN key press activates the laser and decode
processing. The laser remains on and decode processing continues
until a valid decode, or the Laser On Time-out is reached.
processing. The laser remains on and decode processing continues
until a valid decode, or the Laser On Time-out is reached.
Pulse
Continuous
The laser is always on and decoding.
Continuous
See Also
Time-out Between Same Symbol
Blinking
This trigger mode is used for triggerless scanning operations.
Scanning range is reduced in this mode. This mode cannot be used
with scanners that support an aim mode (e.g. the SE1223/SE1224LR
Long Range scanner endcap).
Scanning range is reduced in this mode. This mode cannot be used
with scanners that support an aim mode (e.g. the SE1223/SE1224LR
Long Range scanner endcap).
Blinking