Краткое Руководство По Установке для Ricoh ap204

Configuring Windows 95/98

Click the

[Details]

tab, and then click

[Add Port]

In the

[Add Port]

box, click

[Other]

, and select

[Multi Direct Print]

by clicking it,

and then click

[OK]

The

[Select Printer]

dialog appears, and the printers which can print with TCP/

IP are displayed.

Limitation

❒ If PRINTER MANAGER FOR CLIENT is not installed in your computer,

printers which can print with TCP/IP are not displayed.

❒ Printers might be displayed when NetBEUI is selected as a protocol. How-

ever, the Network Interface Board does not support NetBEUI printing.

Note

❒ The printers which have replied to a broadcast from the computer are list-

ed here. To print to a computer that is not on this list, or to directly input
the printer, highlight

[New Printer]

by clicking it, and click

[Next >]

, and then

input the port name with procedure

Select the printer you want to use by clicking it, and click

[Next >]

Reference

If you want to know more about a particular item in the dialog, refer to
P.61 “Multi Direct Print”.

Note

❒ You can identify the “Printer Name” and “Address” on the “configuration

page” printed by the printer.

To confirm that the port name of the printer is correct, click

[Next >]

If you did not select a printer with the previous procedure, you must input
the IP address of the Network Interface Board into the

[IP Address]

box.

Note

❒ You can input the host name or a domain name instead of an IP address

into the

[Port Name]

box.

❒ When you use DHCP to assign IP addresses to Network Interface Boards,

you can use a printer name as the host name. Consult your network ad-
ministrator to confirm the printer name. For more information, refer to

⇒

P.87 “The Others”

Limitation

❒ You cannot use a host name that begins with “%%”.

Confirm the port name in the

[Port Name]

box, and click

[Finish]

Confirm that the port name is displayed in the

[Print to the following port]

box,

and click

[OK]