Инструкции для Ricoh ap204

Содержание

• QUICK INSTALLATION GUIDE

  1
• G033 OPERATOR'S MANUAL

  3
  • Safety Information

    4
    • Safety During Operation

      4
  • ENERGY STAR Program

    6
    • Recycled paper

      6
  • Color Guide

    7
    • Color Printing Basics

      7
      • Additive (Emitted) and Subtractive (Reflected) Color Models

        7
      • Printed Color

        9
    • Example of Color Adjustments Using the Printer Driver

      10
      • Quality Settings

        10
      • Color Settings

        12
  • Manuals for Your Printer

    15
    • Quick Installation Guide

      15
    • Operating Instructions

      15
  • How to Read this Manual

    16
    • Symbols

      16
  • Table of Contents

    17
  • GETTING ACQUAINTED

    20
    • Features of Your Printer

      20
      • Office Color Printer

        20
    • Guide to the Printer

      21
      • Exterior - Front View

        21
      • Exterior - Rear View

        22
      • Interior

        23
      • Operation Panel

        24
  • INSTALLING OPTIONS

    26
    • Available Options

      27
    • Installing the Memory Unit

      28
    • Installing the RICOH-SCRIPT 2 Type204

      30
    • Installing the Network Interface Board Type204

      32
    • Installing the IEEE 1284 Parallel Type204

      34
    • Installing the Paper Feed Unit Type204

      36
    • Installing the Paper Cassette Type204

      40
  • CONFIGURING THE PRINTER FOR THE NETWORK WITH THE OPERATION PANEL

    42
    • Configuring the Printer for the Network with the Operation Panel

      42
  • INSTALLING THE IPDL-C PRINTER DRIVER

    48
    • Before Installing the Printer Drivers

      48
      • Installing the Printer Drivers

        48
    • Windows 95/98 - Installing the IPDL-C Printer Driver

      49
      • Installing the Printer Driver Using Plug and Play

        50
        • When the [New Hardware Found] dialog appears

          50
        • When the [Device Driver Wizard] appears

          50
        • When Widows 95/98 starts normally

          50
        • Plug and Play Installation 1

          51
        • Plug and Play Installation 2

          52
      • Installing the Printer Driver Without Using Plug and Play

        53
      • Setting Up Options

        55
      • Canceling a Print Job

        56
    • Windows 3.1x - Installing the IPDL-C Printer Driver

      57
      • Installing the Printer Driver

        57
      • Setting Up Options

        59
      • Canceling a Print Job

        60
    • Windows NT4.0 - Installing the IPDL-C Printer Driver

      61
      • Installing the Printer Driver

        61
      • Setting Up Options

        63
      • Canceling a Print Job

        64
  • PAPER AND OTHER MEDIA

    66
    • Paper and Other Media Supported by this Printer

      66
      • Paper Types and Sizes

        66
        • Standard Paper Tray

          66
        • Optional 250-sheet Paper Tray (Paper Feed Unit Type204)

          66
        • Optional Paper Tray (Paper Cassette Type204* )

          66
      • Precautions for Paper

        67
        • Plain Paper

          67
        • Thick Paper

          67
        • Adhesive Labels

          68
        • OHP Transparencies

          68
      • Printable Area

        69
    • Loading Paper

      70
      • Loading Paper in the Paper Tray

        70
      • Switching between Paper Trays

        73
  • TROUBLESHOOTING

    74
    • Error & Status Messages

      74
      • Printed Error Message

        74
      • Error & Status Messages on the Operation Panel

        75
      • Getting Printer Information over the Network

        79
        • Printer Current Status

          79
        • Printer Configuration

          82
    • Printer DoesnÌt Print

      84
    • Other Printing Problems

      86
    • Removing Misfed Paper

      90
      • When the Message ÏRemove

        91
        • near a tray

          91
      • Misfeed From TrayÓ Appears

        91
      • When the Message ÏOpen Rear Cover Remove MisfeedÓ Ap-pears

        92
      • When the Message ÏRemove Misfeed From Output TrayÓ Ap-pears

        93
    • Cleaning and Adjusting the Printer

      94
      • Cleaning the Charge Wire

        94
      • Adjusting the Image Density

        96
      • Adjusting the Setting of ÏReg-istrationÓ of the Optional Tray

        97
    • Replacing Consumables

      99
      • Replacing the Toner Cartridges

        99
      • Replacing the Photoconductor Unit

        101
      • Replacing the Waste Toner Bot-tle

        105
      • Replacing the Fuser Oil Bottle and Ozone Filter

        106
      • Replacing the Fuser Cleaner

        108
        • and setting priorities

          110
  • MAKING PRINTER SETTINGS WITH THE OPERATION PANEL

    110
    • Setting Menus

      111
    • Protecting the Menus

      113
      • Protecting the Menus

        113
      • Changing the Menu Settings without Removing Protect

        114
      • Removing Protect

        115
    • Menu Table

      116
    • Menu Settings

      117
      • IPDL-C Menu

        117
        • Job Timeout

          117
        • I/O Timeout

          117
      • System Menu

        117
        • Paper Tray

          117
        • I/O Buffer

          117
        • Energy Saver

          118
        • Transfer

          118
        • Image Memory

          118
        • Parallel 1

          118
        • Parallel 2

          119
        • Bi-direction

          119
        • Printer Lang (Printer Language)

          119
        • Language

          119
        • IP Address - 39. Active Protocol

          119
    • Printing the Configuration Page

      120
    • Interpreting Configuration Page

      121
      • Reference

        121
        • Firmware Version

          121
        • Printer ID

          121
        • Total Installed RAM

          121
        • Option Interface

          121
      • Printer Information

        121
        • Tray 1, Tray 2

          121
        • Pages Printed

          121
        • Printer Error

          121
      • Status List

        122
        • IPDL-C

          122
        • System

          122
        • Network

          122
      • Error Log

        122
    • Printing the Color Sample

      123
    • Resetting Menus

      124
  • APPENDIX

    126
    • Memory Capacity and Paper Size

      126
    • Moving and Transporting the Printer

      128
    • Specifications

      129
      • Mainframe

        129
      • Options

        131
        • Paper Feed Unit Type204

          131
        • Paper Cassette Type204

          131
        • RICOH-SCRIPT 2 Type204

          131
        • IEEE 1284 Parallel Type204

          131
        • Network Interface Board Type204

          132
        • Memory Unit Type204 (16MB) and Memory Unit Type204 (32MB)

          132
    • Consumbles

      133
    • Glossaries

      134
    • INDEX

      136
• NETWORK INTERFACE BOARD TYPE 204

  138
  • Introduction

    144
    • Introduction

      144
      • This manual contains detailed instructions on configuring your printer for use as a network print...

        144
        • This manual contains detailed instructions on configuring your printer for use as a network print...

          144
        • <GRAPHIC>

          144
        • The procedures written in this manual assume that you are a network administrator. If you aren't,...

          144
          • The procedures written in this manual assume that you are a network administrator. If you aren't,...

            144
        • Refer to the manual that came with the printer for information on physically installing the Netwo...

          144
          • Refer to the manual that came with the printer for information on physically installing the Netwo...

            144
        • Features

          144
          • Features

            144
            • Features

              144
            • • Support for 100BASE-TX and 10BASE-T

              144
              • • Support for 100BASE-TX and 10BASE-T

                144
                • • Support for 100BASE-TX and 10BASE-T

                  144
                  • • Support for 100BASE-TX and 10BASE-T

                    144
                • • The Network Interface Board is compatible with NetWare (IPX/SPX), Windows NT

                  144
                  • • The Network Interface Board is compatible with NetWare (IPX/SPX), Windows NT

                    144
                • • A computer used as dedicated print server is not required, because the Network Interface Board ...

                  144
                  • • A computer used as dedicated print server is not required, because the Network Interface Board ...

                    144
                • • The Network Interface Board can connect the printer to the network without requiring its own po...

                  144
                  • • The Network Interface Board can connect the printer to the network without requiring its own po...

                    144
    • Setting Up the Printer in a Network

      145
      • Setting Up the Printer in a Network

        145
      • Printing without Using a Print Server

        145
        • Printing without Using a Print Server

          145
        • You don't have to use a print server. The actual procedure differs depending on your operating sy...

          145
          • You don't have to use a print server. The actual procedure differs depending on your operating sy...

            145
        • <GRAPHIC>

          145
          • <GRAPHIC>

            145
          • • Windows NT 4.0

            145
            • • Windows NT 4.0

              145
              • • Windows NT 4.0

                145
            • • Windows 95/98

              145
              • • Windows 95/98

                145
            • • UNIX

              145
              • • UNIX

                145
            • • Macintosh

              145
              • • Macintosh

                145
      • Printing with a Windows NT Print Server

        146
        • Printing with a Windows NT Print Server

          146
        • When Windows NT or Windows Workstation is the operating system being used on the print server, th...

          146
          • When Windows NT or Windows Workstation is the operating system being used on the print server, th...

            146
          • <GRAPHIC>

            146
          • For instructions on setting up TCP/IP in a Windows NT environment, refer to

            146
            • For instructions on setting up TCP/IP in a Windows NT environment, refer to

              146
            • Client setup instructions are different for each type of Windows OS.

              146
      • Printing as a NetWare Print Server

        146
        • Printing as a NetWare Print Server

          146
        • The Network Interface Board allows you to set up your printer in a NetWare environment as either ...

          146
          • The Network Interface Board allows you to set up your printer in a NetWare environment as either ...

            146
          • Configure as Print Server

            147
            • Configure as Print Server

              147
            • <GRAPHIC>

              147
          • The actual procedures for configuring your printer may differ depending on the version of NetWare.

            147
            • The actual procedures for configuring your printer may differ depending on the version of NetWare.

              147
            • The actual procedures for configuring your client computer may differ depending on the operating ...

              147
          • Configure as Remote Printer

            148
            • Configure as Remote Printer

              148
          • The actual procedures for configuring your printer may differ depending on the version of NetWare.

            148
            • The actual procedures for configuring your printer may differ depending on the version of NetWare.

              148
            • The actual procedures for configuring your client computer may differ depending on the operating ...

              148
  • 1. Windows 95/98 Configuration

    150
    • 1. Windows 95/98 Configuration

      150
    • You can use your printer as a network printer with Windows

      150
      • You can use your printer as a network printer with Windows

        150
    • Configuring Windows 95/98

      151
      • Configuring Windows 95/98

        151
      • Preparing to Print

        151
        • Preparing to Print

          151
        • The network must be configured as described below.

          151
          • The network must be configured as described below.

            151
        • Configuring the Printer

          151
          • Configuring the Printer

            151
          • Configure your printer to use the TCP/IP protocol.

            151
            • Configure your printer to use the TCP/IP protocol.

              151
          • • Confirm that the TCP/IP protocol is set to be active. (The factory default is Active)

            151
            • • Confirm that the TCP/IP protocol is set to be active. (The factory default is Active)

              151
              • • Confirm that the TCP/IP protocol is set to be active. (The factory default is Active)

                151
                • • Confirm that the TCP/IP protocol is set to be active. (The factory default is Active)

                  151
                  • • Confirm that the TCP/IP protocol is set to be active. (The factory default is Active)

                    151
                • • Assign an IP address and make other settings required for using the TCP/IP protocol.

                  151
                  • • Assign an IP address and make other settings required for using the TCP/IP protocol.

                    151
            • For more information on how to make above settings, refer to the Operating Instructions on your p...

              151
              • For more information on how to make above settings, refer to the Operating Instructions on your p...

                151
              • If DHCP is used to assign IP addresses, refer to ...

                151
            • After setting the IP address, use the PING command to confirm that it has been set correctly.

              151
              • After setting the IP address, use the PING command to confirm that it has been set correctly.

                151
        • Configuring a Windows 95/98 computer

          152
          • Configuring a Windows 95/98 computer

            152
          • Follow these steps to configure a Windows 95/98 to use the TCP/IP protocol.

            152
            • Follow these steps to configure a Windows 95/98 to use the TCP/IP protocol.

              152
          • A Double-click the

            152
            • A Double-click the

              152
              • A Double-click the

                152
                • A Double-click the

                  152
                • If TCP/IP is not installed, click

                  152
                  • If TCP/IP is not installed, click

                    152
              • B Configure the TCP/IP protocols with the appropriate IP address, subnet mask and other settings.

                152
                • B Configure the TCP/IP protocols with the appropriate IP address, subnet mask and other settings.

                  152
                • Confirm with the network administrator that the settings are correct.

                  152
      • Installing the Multi Direct Print Application

        152
        • Installing the Multi Direct Print Application

          152
        • Follow these instructions to install Multi Direct Print.

          152
          • Follow these instructions to install Multi Direct Print.

            152
        • You must restart the computer after installing Multi Direct Print. Be sure to close all applicati...

          152
          • You must restart the computer after installing Multi Direct Print. Be sure to close all applicati...

            152
        • You must install Multi Direct Print and the appropriate printer driver in order to print. To be a...

          152
          • You must install Multi Direct Print and the appropriate printer driver in order to print. To be a...

            152
            • You must install Multi Direct Print and the appropriate printer driver in order to print. To be a...

              152
          • A Insert the CD-ROM that comes with the printer into your computer's CD- ROM drive.

            152
            • A Insert the CD-ROM that comes with the printer into your computer's CD- ROM drive.

              152
              • A Insert the CD-ROM that comes with the printer into your computer's CD- ROM drive.

                152
            • B Open

              152
              • B Open

                152
            • C In the

              152
              • C In the

                152
            • D Click

              152
              • D Click

                152
            • E Input the name of the CD-ROM drive in the

              152
              • E Input the name of the CD-ROM drive in the

                152
              • An example would be “D:\NETWORK\MDP\SETUP” when the drive letter is “D”.

                153
                • An example would be “D:\NETWORK\MDP\SETUP” when the drive letter is “D”.

                  153
            • F After the

              153
              • F After the

                153
            • G After the

              153
              • G After the

                153
              • The computer restarts, and Multi Direct Print can now be used. If you select “No”, be sure to res...

                153
              • Go to

                153
        • Uninstalling the Multi Direct Print Application

          153
          • Uninstalling the Multi Direct Print Application

            153
          • A Open

            153
            • A Open

              153
              • A Open

                153
                • A Open

                  153
              • B With

                153
                • B With

                  153
              • C After a confirmation message appears, click

                153
                • C After a confirmation message appears, click

                  153
                • UninstallShield removes all of the components of the Multi Direct Print application.

                  153
              • D When the uninstallation is complete, restart the computer.

                153
                • D When the uninstallation is complete, restart the computer.

                  153
      • Setting Up the Printer Driver

        153
        • Setting Up the Printer Driver

          153
        • Using Multi Direct Print to print is not possible until the printer driver is installed and the c...

          153
          • Using Multi Direct Print to print is not possible until the printer driver is installed and the c...

            153
        • The target printer must be turned on before starting the installation process.

          153
          • The target printer must be turned on before starting the installation process.

            153
        • A Install the printer drivers.

          153
          • A Install the printer drivers.

            153
            • A Install the printer drivers.

              153
              • A Install the printer drivers.

                153
              • If the printer drivers have already been installed, you can proceed to the next step.

                153
              • For more information, refer to the Operation Instructions of your printer.

                153
                • For more information, refer to the Operation Instructions of your printer.

                  153
              • Any port can be selected during the installation, however, LPT1 is recommended.

                153
                • Any port can be selected during the installation, however, LPT1 is recommended.

                  153
            • B In the

              153
              • B In the

                153
            • C Click the

              154
              • C Click the

                154
            • D In the

              154
              • D In the

                154
              • The

                154
              • If PRINTER MANAGER FOR CLIENT is not installed in your computer, printers which can print with TC...

                154
                • If PRINTER MANAGER FOR CLIENT is not installed in your computer, printers which can print with TC...

                  154
                • Printers might be displayed when NetBEUI is selected as a protocol. However, the Network Interfac...

                  154
              • The printers which have replied to a broadcast from the computer are listed here. To print to a c...

                154
                • The printers which have replied to a broadcast from the computer are listed here. To print to a c...

                  154
            • E Select the printer you want to use by clicking it, and click

              154
              • E Select the printer you want to use by clicking it, and click

                154
              • If you want to know more about a particular item in the dialog, refer to

                154
                • If you want to know more about a particular item in the dialog, refer to

                  154
              • You can identify the “Printer Name” and “Address” on the “configuration page” printed by the prin...

                154
                • You can identify the “Printer Name” and “Address” on the “configuration page” printed by the prin...

                  154
            • F To confirm that the port name of the printer is correct, click

              154
              • F To confirm that the port name of the printer is correct, click

                154
              • If you did not select a printer with the previous procedure, you must input the IP address of the...

                154
              • You can input the host name or a domain name instead of an IP address into the

                154
                • You can input the host name or a domain name instead of an IP address into the

                  154
                • When you use DHCP to assign IP addresses to Network Interface Boards, you can use a printer name ...

                  154
              • You cannot use a host name that begins with “%%”.

                154
                • You cannot use a host name that begins with “%%”.

                  154
            • G Confirm the port name in the

              154
              • G Confirm the port name in the

                154
            • H Confirm that the port name is displayed in the

              154
              • H Confirm that the port name is displayed in the

                154
              • Configuration is complete.

                155
              • When you print, the printing procedure is no different. When you select the printer configured he...

                155
  • 2. Windows NT 4.0 Configuration

    156
    • 2. Windows NT 4.0 Configuration

      156
    • You can use your printer as a network printer with Windows NT

      156
      • You can use your printer as a network printer with Windows NT

        156
    • Preparing for a Network Connection

      157
      • Preparing for a Network Connection

        157
      • Preparing to Print

        157
        • Preparing to Print

          157
        • Follow the instructions below to configure the Network Interface Board and Windows NT to use the ...

          157
          • Follow the instructions below to configure the Network Interface Board and Windows NT to use the ...

            157
        • Configuring the Printer

          157
          • Configuring the Printer

            157
          • Configure your printer to use the TCP/IP protocol.

            157
            • Configure your printer to use the TCP/IP protocol.

              157
          • • Confirm that the TCP/IP protocol is set to be active. (The factory default is Active)

            157
            • • Confirm that the TCP/IP protocol is set to be active. (The factory default is Active)

              157
              • • Confirm that the TCP/IP protocol is set to be active. (The factory default is Active)

                157
                • • Confirm that the TCP/IP protocol is set to be active. (The factory default is Active)

                  157
                  • • Confirm that the TCP/IP protocol is set to be active. (The factory default is Active)

                    157
                • • Assign an IP address and make other settings required for using the TCP/IP protocol.

                  157
                  • • Assign an IP address and make other settings required for using the TCP/IP protocol.

                    157
            • For more information on how to make above settings, refer to the Operating Instructions on your p...

              157
              • For more information on how to make above settings, refer to the Operating Instructions on your p...

                157
              • If DHCP is used to assign IP addresses, refer to ...

                157
            • After setting the IP address, use the PING command to confirm that it has been set correctly.

              157
              • After setting the IP address, use the PING command to confirm that it has been set correctly.

                157
        • Configuring a Windows NT Computer

          158
          • Configuring a Windows NT Computer

            158
          • Follow these steps to configure a Windows NT to use the TCP/IP protocol.

            158
            • Follow these steps to configure a Windows NT to use the TCP/IP protocol.

              158
          • A Double-click the

            158
            • A Double-click the

              158
              • A Double-click the

                158
                • A Double-click the

                  158
                • If the TCP/IP protocol is not installed, click

                  158
                  • If the TCP/IP protocol is not installed, click

                    158
              • B Configure the TCP/IP protocols with the appropriate IP address, subnet mask and other settings.

                158
                • B Configure the TCP/IP protocols with the appropriate IP address, subnet mask and other settings.

                  158
                • Confirm with the network administrator that the settings are correct.

                  158
              • C Click the

                158
                • C Click the

                  158
                • If “Microsoft TCP/IP Printing” is not installed, click

                  158
      • Installing the Multi Direct Print Application

        158
        • Installing the Multi Direct Print Application

          158
        • Follow these instructions to install Multi Direct Print.

          158
          • Follow these instructions to install Multi Direct Print.

            158
        • You must restart the computer after installing Multi Direct Print. Be sure to close all applicati...

          158
          • You must restart the computer after installing Multi Direct Print. Be sure to close all applicati...

            158
        • You must install Multi Direct Print and the appropriate printer driver in order to print. To be a...

          158
          • You must install Multi Direct Print and the appropriate printer driver in order to print. To be a...

            158
            • You must install Multi Direct Print and the appropriate printer driver in order to print. To be a...

              158
            • To install this software you must be logged on as a member of the Administrators group.

              158
          • A Insert the CD-ROM that comes with the printer into your computer's CD- ROM drive.

            158
            • A Insert the CD-ROM that comes with the printer into your computer's CD- ROM drive.

              158
              • A Insert the CD-ROM that comes with the printer into your computer's CD- ROM drive.

                158
            • B Open

              158
              • B Open

                158
            • C In the

              159
              • C In the

                159
            • D Click

              159
              • D Click

                159
            • E Input the name of the CD-ROM drive in the

              159
              • E Input the name of the CD-ROM drive in the

                159
              • An example would be “D:\NETWORK\MDP\SETUP” when the drive letter is “D”.

                159
                • An example would be “D:\NETWORK\MDP\SETUP” when the drive letter is “D”.

                  159
            • F After the

              159
              • F After the

                159
            • G After the

              159
              • G After the

                159
              • The computer restarts, and Multi Direct Print can now be used. If you select “No”, be sure to res...

                159
              • Go to

                159
        • Uninstalling the Multi Direct Print Application

          159
          • Uninstalling the Multi Direct Print Application

            159
          • A Open

            159
            • A Open

              159
              • A Open

                159
                • A Open

                  159
              • B In the

                159
                • B In the

                  159
              • C After a confirmation message appears, click

                159
                • C After a confirmation message appears, click

                  159
                • UninstallShield removes all of the components of the Multi Direct Print application.

                  159
              • D When the uninstallation is complete, restart the computer.

                159
                • D When the uninstallation is complete, restart the computer.

                  159
      • Setting Up the Printer Driver

        159
        • Setting Up the Printer Driver

          159
        • Using Multi Direct Print to print is not possible until the printer driver is installed and the c...

          159
          • Using Multi Direct Print to print is not possible until the printer driver is installed and the c...

            159
        • The target printer must be turned on before starting the installation process.

          159
          • The target printer must be turned on before starting the installation process.

            159
        • A Install the printer drivers.

          159
          • A Install the printer drivers.

            159
            • A Install the printer drivers.

              159
              • A Install the printer drivers.

                159
              • If the printer drivers have already been installed, you can proceed to the next step.

                159
              • For more information, refer to the Operation Instructions of your printer.

                160
                • For more information, refer to the Operation Instructions of your printer.

                  160
              • Any port can be selected during the installation, however, LPT1 is recommended.

                160
                • Any port can be selected during the installation, however, LPT1 is recommended.

                  160
            • B In the

              160
              • B In the

                160
            • C Click the

              160
              • C Click the

                160
            • D In the

              160
              • D In the

                160
              • The

                160
              • If PRINTER MANAGER FOR CLIENT is not installed in your computer, printers which can print with TC...

                160
                • If PRINTER MANAGER FOR CLIENT is not installed in your computer, printers which can print with TC...

                  160
                • Printers might be displayed when NetBEUI is selected as a protocol. However, the Network Interfac...

                  160
              • The printers which have replied to a broadcast from the computer are listed here. To print to a c...

                160
                • The printers which have replied to a broadcast from the computer are listed here. To print to a c...

                  160
            • E Select the printer you want to use by clicking it, and click

              160
              • E Select the printer you want to use by clicking it, and click

                160
              • If you want to know more about a particular item in the dialog, refer to fi

                160
                • If you want to know more about a particular item in the dialog, refer to fi

                  160
              • You can identify the “Printer Name” and “Address” on the “configuration page” printed by the prin...

                160
                • You can identify the “Printer Name” and “Address” on the “configuration page” printed by the prin...

                  160
            • F To confirm that the port name of the printer is correct, click

              160
              • F To confirm that the port name of the printer is correct, click

                160
              • If you did not select a printer with the previous procedure, you must input the IP address of the...

                160
              • You can input the host name or a domain name instead of an IP address into the

                160
                • You can input the host name or a domain name instead of an IP address into the

                  160
                • When you use DHCP to assign IP addresses to Network Interface Boards, you can use a printer name ...

                  160
              • You cannot use a host name that begins with “%%”.

                161
                • You cannot use a host name that begins with “%%”.

                  161
            • G Confirm the port name in the

              161
              • G Confirm the port name in the

                161
            • H In the

              161
              • H In the

                161
            • I Confirm that the port name is displayed in the

              161
              • I Confirm that the port name is displayed in the

                161
              • Configuration is complete.

                161
              • When you print, the printing procedure is no different. When you select the printer configured he...

                161
    • Setting up a Client Computer

      162
      • Setting up a Client Computer

        162
      • This section describes the procedures for setting up a client in a network that uses Windows NT S...

        162
        • This section describes the procedures for setting up a client in a network that uses Windows NT S...

          162
      • Explanation of this section assumes that the client has already been configured to communicate wi...

        162
        • Explanation of this section assumes that the client has already been configured to communicate wi...

          162
          • Explanation of this section assumes that the client has already been configured to communicate wi...

            162
      • Windows 95/98

        162
        • Windows 95/98

          162
        • To print from Windows 95/98, you must install the printer driver and change the printer port to t...

          162
          • To print from Windows 95/98, you must install the printer driver and change the printer port to t...

            162
        • A Install the printer driver as a local printer.

          162
          • A Install the printer driver as a local printer.

            162
            • A Install the printer driver as a local printer.

              162
              • A Install the printer driver as a local printer.

                162
              • For more information, refer to the Operation Instructions of your printer.

                162
                • For more information, refer to the Operation Instructions of your printer.

                  162
              • Any port can be selected during the installation, however, LPT1 is recommended.

                162
                • Any port can be selected during the installation, however, LPT1 is recommended.

                  162
            • B Click

              162
              • B Click

                162
            • C Select the icon of the printer you want to use by clicking it. On the

              162
              • C Select the icon of the printer you want to use by clicking it. On the

                162
            • D Click the

              162
              • D Click the

                162
            • E Click

              163
              • E Click

                163
            • F On the network tree, double-click the name of the computer used as the print server.

              163
              • F On the network tree, double-click the name of the computer used as the print server.

                163
              • The printers attached to the network are displayed.

                163
            • G Select the name of the printer you want to use by clicking it, and click

              163
              • G Select the name of the printer you want to use by clicking it, and click

                163
            • H Click

              163
              • H Click

                163
            • I Confirm that the port name is displayed in the

              163
              • I Confirm that the port name is displayed in the

                163
      • Windows NT 4.0

        163
        • Windows NT 4.0

          163
        • Use the

          163
          • Use the

            163
          • A Click

            163
            • A Click

              163
              • A Click

                163
            • B Double-click the

              163
              • B Double-click the

                163
              • This launches the Add Printer Wizard.

                163
            • C Click

              163
              • C Click

                163
            • D In the

              163
              • D In the

                163
              • The printers attached to the network are displayed.

                163
            • E Highlight the printer you want to use by clicking it, and click

              163
              • E Highlight the printer you want to use by clicking it, and click

                163
              • If the printer driver is not installed in the print server, a message appears. If a driver has be...

                163
                • If the printer driver is not installed in the print server, a message appears. If a driver has be...

                  163
                • There is a Windows NT 4.0 printer driver in the \DRIVERS\IPDL_C\NT40 directory of the CD-ROM that...

                  163
            • F Select whether you use this printer as the default printer, and click

              163
              • F Select whether you use this printer as the default printer, and click

                163
            • G After installation is complete, click

              163
              • G After installation is complete, click

                163
              • The icon of the newly installed printer appears in the

                163
    • Configuring LPR Port Printing

      164
      • Configuring LPR Port Printing

        164
      • This section explains the procedure for printing to a LPR port.

        164
        • This section explains the procedure for printing to a LPR port.

          164
      • The TCP/IP protocols must be installed and configured correctly. Refer to

        164
        • The TCP/IP protocols must be installed and configured correctly. Refer to

          164
      • The following instructions assume that the printer drivers have already been installed. This is a...

        164
        • The following instructions assume that the printer drivers have already been installed. This is a...

          164
          • The following instructions assume that the printer drivers have already been installed. This is a...

            164
        • A Click

          164
          • A Click

            164
            • A Click

              164
          • B Select the icon of the printer you want to use by clicking it. On the

            164
            • B Select the icon of the printer you want to use by clicking it. On the

              164
          • C Click the

            164
            • C Click the

              164
          • D In the

            164
            • D In the

              164
            • If “LPR Port” does not appear, “Microsoft TCP/IP Printing” has not been installed.

              164
              • If “LPR Port” does not appear, “Microsoft TCP/IP Printing” has not been installed.

                164
          • E Input the IP address of the Network Interface Board into the

            164
            • E Input the IP address of the Network Interface Board into the

              164
          • F Input “lp” into the

            164
            • F Input “lp” into the

              164
          • G

            164
          • H Click

            164
            • H Click

              164
          • I Confirm that the port name is displayed in the

            164
            • I Confirm that the port name is displayed in the

              164
  • 3. NetWare Configuration

    166
    • 3. NetWare Configuration

      166
    • This chapter describes how to configure your printer to use as a print server or a remote printer...

      166
      • This chapter describes how to configure your printer to use as a print server or a remote printer...

        166
      • NetWare must be set to Active using the operation panel of your printer. For information on how t...

        166
        • NetWare must be set to Active using the operation panel of your printer. For information on how t...

          166
    • Installing the NIB Setup Tool

      167
      • Installing the NIB Setup Tool

        167
      • A utility called the NIB Setup Tool is provided to configure your printer to work in a NetWare en...

        167
        • A utility called the NIB Setup Tool is provided to configure your printer to work in a NetWare en...

          167
      • NetWare 3.x or 4.x must be functional to run the NIB Setup Tool.

        167
        • NetWare 3.x or 4.x must be functional to run the NIB Setup Tool.

          167
          • NetWare 3.x or 4.x must be functional to run the NIB Setup Tool.

            167
          • The NIB Setup Tool is supported to work with the following operation systems.

            167
      • Installing the PRINTER MANAGER FOR ADMINISTRATOR

        167
        • Installing the PRINTER MANAGER FOR ADMINISTRATOR

          167
        • Follow these steps to install the PRINTER MANAGER FOR ADMINISTRATOR.

          167
          • Follow these steps to install the PRINTER MANAGER FOR ADMINISTRATOR.

            167
        • You should install the PRINTER MANAGER FOR ADMINISTRATOR on your computer. If you install it on a...

          167
          • You should install the PRINTER MANAGER FOR ADMINISTRATOR on your computer. If you install it on a...

            167
          • Be sure to close all applications before starting the installation procedure.

            167
        • A Insert the CD-ROM that comes with your printer into your computer's CD- ROM drive.

          167
          • A Insert the CD-ROM that comes with your printer into your computer's CD- ROM drive.

            167
            • A Insert the CD-ROM that comes with your printer into your computer's CD- ROM drive.

              167
              • A Insert the CD-ROM that comes with your printer into your computer's CD- ROM drive.

                167
            • B Open

              167
              • B Open

                167
            • C In the [Install/Uninstall] tab, click [Install].

              167
              • C In the [Install/Uninstall] tab, click [Install].

                167
            • D Click

              167
              • D Click

                167
            • E Input the name of the CD-ROM drive in the [command line for installation program] box, followed...

              167
              • E Input the name of the CD-ROM drive in the [command line for installation program] box, followed...

                167
              • An example would be “D:\NETWORK\AFICIOMN\ADMIN\SETUP ” when the drive name is “D”.

                167
                • An example would be “D:\NETWORK\AFICIOMN\ADMIN\SETUP ” when the drive name is “D”.

                  167
            • F After the

              167
              • F After the

                167
            • G The Software License Agreement appears.

              167
              • G The Software License Agreement appears.

                167
              • After reading through all of the contents by clicking

                168
            • H Select a directory in which it is to be installed, and click

              168
              • H Select a directory in which it is to be installed, and click

                168
              • If you change the displayed directory, click

                168
              • The installation program starts.

                168
              • After the confirmation dialog appears, the installation program is complete.

                168
      • Running the NIB Setup Tool

        168
        • Running the NIB Setup Tool

          168
        • A Click

          168
          • A Click

            168
            • A Click

              168
              • A Click

                168
    • Configuring the Network Interface Board Using the NIB Setup Tool

      169
      • Configuring the Network Interface Board Using the NIB Setup Tool

        169
      • Using the NIB Setup Tool, you can easily set up a NetWare printing environment after physically i...

        169
        • Using the NIB Setup Tool, you can easily set up a NetWare printing environment after physically i...

          169
        • You can select

          169
        • When you configure the Network Interface Board for the first time, use the Wizard method.

          169
      • When the Wizard method is used, the Network Interface Board is configured to work as a Print Serv...

        169
        • When the Wizard method is used, the Network Interface Board is configured to work as a Print Serv...

          169
          • When the Wizard method is used, the Network Interface Board is configured to work as a Print Serv...

            169
        • This section assumes that NetWare is functional and that the necessary environment for the NetWar...

          169
          • This section assumes that NetWare is functional and that the necessary environment for the NetWar...

            169
        • A Log in to the print server as Admin.

          169
          • A Log in to the print server as Admin.

            169
            • A Log in to the print server as Admin.

              169
          • B Run the NIB Setup Tool.

            169
            • B Run the NIB Setup Tool.

              169
            • P.25 “Running the NIB Setup Tool”

              169
              • P.25 “Running the NIB Setup Tool”

                169
                • P.25 “Running the NIB Setup Tool”

                  169
          • C Click

            169
            • C Click

              169
            • The Browse dialog of the Network Interface Board appears.

              169
          • D Click

            169
            • D Click

              169
          • E Select the name of the Network Interface Board you are configuring by clicking it, and click

            169
            • E Select the name of the Network Interface Board you are configuring by clicking it, and click

              169
            • If you don't know which Network Interface Board you are configuring, print the Configuration Page...

              169
          • F Confirm that the MAC and IPX addresses are correct, and click

            169
            • F Confirm that the MAC and IPX addresses are correct, and click

              169
          • G Input the printer name into the

            169
            • G Input the printer name into the

              169
            • The factory default is RNP followed by the last 3 digits of the MAC address. We recommend that yo...

              169
          • H Input your comments in the

            169
            • H Input your comments in the

              169
            • The input comments are displayed with the device name when using a utility such as PRINTER MANAGE...

              170
          • I In the dialog for selecting a network environment, place ' mark for

            170
            • I In the dialog for selecting a network environment, place ' mark for

              170
          • J Click

            170
            • J Click

              170
            • A dialog for configuring the NetWare environment appears.

              170
          • K Select

            170
            • K Select

              170
            • When you are using NetWare version 4.x or higher, you should select

              170
          • L In the

            170
            • L In the

              170
            • Clicking

              170
          • M If you selected

            170
            • M If you selected

              170
            • Clicking

              170
            • As a context, object names are input from a lower object and divided by a period. For example, if...

              170
          • N Click

            170
            • N Click

              170
          • O Input the name of the print server you are creating on the NetWare environment into the

            170
            • O Input the name of the print server you are creating on the NetWare environment into the

              170
            • The factory default name is already entered. You should change it if necessary.

              170
          • P Input the name of the Printer into the

            170
            • P Input the name of the Printer into the

              170
            • The factory default is “Print Server Name” followed by “_1 _Q”( quotation marks are not included)...

              170
          • Q If you selected

            170
            • Q If you selected

              170
            • Clicking

              170
          • R Click

            170
            • R Click

              170
            • A dialog to confirm the print environment appears.

              170
          • S After confirming the environment, click

            171
            • S After confirming the environment, click

              171
            • If you want change the settings, click

              171
            • Cliking

              171
          • T After a confirmation dialog appears, select

            171
            • T After a confirmation dialog appears, select

              171
    • NetWare 3.x Configuration

      172
      • NetWare 3.x Configuration

        172
      • The actual procedures for configuring your printer differ depending on whether the Network Interf...

        172
        • The actual procedures for configuring your printer differ depending on whether the Network Interf...

          172
      • The following procedures use the Property Sheet method in configuring the Network Interface Board...

        172
        • The following procedures use the Property Sheet method in configuring the Network Interface Board...

          172
      • This section assumes NetWare is functional and that the necessary environment for the NetWare Pri...

        172
        • This section assumes NetWare is functional and that the necessary environment for the NetWare Pri...

          172
          • This section assumes NetWare is functional and that the necessary environment for the NetWare Pri...

            172
      • Setting Up as Print Server

        172
        • Setting Up as Print Server

          172
        • A Log in to the print server as a Supervisor or a Supervisor equivalent.

          172
          • A Log in to the print server as a Supervisor or a Supervisor equivalent.

            172
            • A Log in to the print server as a Supervisor or a Supervisor equivalent.

              172
              • A Log in to the print server as a Supervisor or a Supervisor equivalent.

                172
            • B Run the NIB Setup Tool.

              172
              • B Run the NIB Setup Tool.

                172
              • “Running the NIB Setup Tool” (fi P.25.

                172
                • “Running the NIB Setup Tool” (fi P.25.

                  172
                  • “Running the NIB Setup Tool” (fi P.25.

                    172
            • C Click

              172
              • C Click

                172
              • The Browse dialog of the Network Interface Board appears.

                172
            • D Click

              172
              • D Click

                172
            • E

              173
            • F Select the name of the Network Interface Board which is to be configured by clicking it, and click

              173
              • F Select the name of the Network Interface Board which is to be configured by clicking it, and click

                173
              • If you don't know which Network Interface Board you are configuring, print the Configuration Page...

                173
                • If you don't know which Network Interface Board you are configuring, print the Configuration Page...

                  173
            • G Confirm that the MAC and IPX addresses are correct, and click

              173
              • G Confirm that the MAC and IPX addresses are correct, and click

                173
              • NIB Setup Tool

                173
                • NIB Setup Tool

                  173
            • H Click

              173
              • H Click

                173
              • The property sheet appears.

                173
            • I Click the

              173
              • I Click the

                173
              • A In the

                173
                • A In the

                  173
                  • A In the

                    173
                • B In the

                  173
                  • B In the

                    173
                  • Clicking

                    173
                • C In the

                  173
                  • C In the

                    173
                • D Click

                  173
                  • D Click

                    173
                • E After the message appears to confirm the reboot, click

                  173
                  • E After the message appears to confirm the reboot, click

                    173
            • J In the

              173
              • J In the

                173
            • K Input “PCONSOLE” from the command prompt.

              173
              • K Input “PCONSOLE” from the command prompt.

                173
              • F:> PCONSOLE

                173
                • F:> PCONSOLE

                  173
            • L Create a print queue as follows.

              173
              • L Create a print queue as follows.

                173
              • If you use a currently defined print queue, proceed to the step L.

                173
                • If you use a currently defined print queue, proceed to the step L.

                  173
              • A In the

                173
                • A In the

                  173
                  • A In the

                    173
                • B Press

                  173
                  • B Press

                    173
                • C Press

                  173
                  • C Press

                    173
            • M Create a printer as follows.

              173
              • M Create a printer as follows.

                173
              • A In the

                173
                • A In the

                  173
                  • A In the

                    173
                • B To create a new print server, press

                  173
                  • B To create a new print server, press

                    173
                  • If you use an currently defined print server, select one of the print servers shown in the

                    173
                  • Use the same name as that specified in the NIB Setup Tool. (Step H-A).

                    174
                    • Use the same name as that specified in the NIB Setup Tool. (Step H-A).

                      174
                • C In the

                  174
                  • C In the

                    174
                • D In the

                  174
                  • D In the

                    174
                • E Select the printer which is indicated as “Not Installed”.

                  174
                  • E Select the printer which is indicated as “Not Installed”.

                    174
                • F If you change the name of the printer, input a new name.

                  174
                  • F If you change the name of the printer, input a new name.

                    174
                  • “Printer x” is assigned to the printer according to the number of the selected printer.

                    174
                • G As Type, select

                  174
                  • G As Type, select

                    174
                  • The IRQ, Buffer size, Starting form, and Queue service mode are automatically configured.

                    174
                • H Press

                  174
                  • H Press

                    174
                • I Press

                  174
                  • I Press

                    174
            • N Assign print queues to the created printer as follows.

              174
              • N Assign print queues to the created printer as follows.

                174
              • A In the

                174
                • A In the

                  174
                  • A In the

                    174
                • B Select the printer created in the Step L.

                  174
                  • B Select the printer created in the Step L.

                    174
                • C Press

                  174
                  • C Press

                    174
                  • You can select more than one queue at a time.

                    174
                    • You can select more than one queue at a time.

                      174
                • D Follow the instructions on the screen to make other necessary settings.

                  174
                  • D Follow the instructions on the screen to make other necessary settings.

                    174
                  • When you have finished the above steps, make sure that the queues are assigned.

                    174
            • O Press

              174
              • O Press

                174
            • P Turn the printer power off and on.

              174
              • P Turn the printer power off and on.

                174
              • To confirm if the printer is configured correctly, enter as follows from the command.

                174
                • To confirm if the printer is configured correctly, enter as follows from the command.

                  174
      • Setting Up as Remote Printer

        174
        • Setting Up as Remote Printer

          174
        • A Log in to the print server as a Supervisor or a Supervisor equivalent.

          174
          • A Log in to the print server as a Supervisor or a Supervisor equivalent.

            174
            • A Log in to the print server as a Supervisor or a Supervisor equivalent.

              174
              • A Log in to the print server as a Supervisor or a Supervisor equivalent.

                174
            • B Run the NIB Setup Tool.

              174
              • B Run the NIB Setup Tool.

                174
              • “Running the NIB Setup Tool” (fi P.25.

                175
                • “Running the NIB Setup Tool” (fi P.25.

                  175
                  • “Running the NIB Setup Tool” (fi P.25.

                    175
            • C Click

              175
              • C Click

                175
              • The Browse dialog of the Network Interface Board appears.

                175
            • D Click

              175
              • D Click

                175
            • E

              175
            • F Select the name of the Network Interface Board which is to be configured by clicking it, and click

              175
              • F Select the name of the Network Interface Board which is to be configured by clicking it, and click

                175
              • If you don't know which Network Interface Board you are configuring, print the Configuration Page...

                175
                • If you don't know which Network Interface Board you are configuring, print the Configuration Page...

                  175
            • G Confirm that the MAC and IPX addresses are correct, and click

              175
              • G Confirm that the MAC and IPX addresses are correct, and click

                175
              • NIB Setup Tool

                175
                • NIB Setup Tool

                  175
            • H Click

              175
              • H Click

                175
              • The property sheet appears.

                175
            • I Click the

              175
              • I Click the

                175
              • A In the

                175
                • A In the

                  175
                  • A In the

                    175
                • B In the

                  175
                  • B In the

                    175
                  • Clicking

                    175
                • C In the

                  175
                  • C In the

                    175
                • D In the

                  175
                  • D In the

                    175
                  • Use the same printer number as that to be created in the printer server.

                    175
                    • Use the same printer number as that to be created in the printer server.

                      175
                • E Click

                  175
                  • E Click

                    175
                • F After the message appears to confirm the reboot, click

                  175
                  • F After the message appears to confirm the reboot, click

                    175
            • J In the

              175
              • J In the

                175
            • K Input “PCONSOLE” from the command prompt.

              175
              • K Input “PCONSOLE” from the command prompt.

                175
              • F:> PCONSOLE

                175
                • F:> PCONSOLE

                  175
            • L Create a print queue as follows.

              175
              • L Create a print queue as follows.

                175
              • If you use a currently defined print queue, proceed to the step L.

                176
                • If you use a currently defined print queue, proceed to the step L.

                  176
              • A In the

                176
                • A In the

                  176
                  • A In the

                    176
                • B Press

                  176
                  • B Press

                    176
                • C Press

                  176
                  • C Press

                    176
            • M Create a printer as follows.

              176
              • M Create a printer as follows.

                176
              • A In the

                176
                • A In the

                  176
                  • A In the

                    176
                • B To create a new print server, press

                  176
                  • B To create a new print server, press

                    176
                  • If you use an currently defined print server, select one of the print servers shown in the

                    176
                  • Use the same name as that specified in the NIB Setup Tool. (Step H-A).

                    176
                    • Use the same name as that specified in the NIB Setup Tool. (Step H-A).

                      176
                • C In the

                  176
                  • C In the

                    176
                • D In the

                  176
                  • D In the

                    176
                • E Select the printer which is indicated as “Not Installed”.

                  176
                  • E Select the printer which is indicated as “Not Installed”.

                    176
                  • Use the same number as that specified as Remote Printer No. using the NIB Setup Tool. (Step H-D)

                    176
                    • Use the same number as that specified as Remote Printer No. using the NIB Setup Tool. (Step H-D)

                      176
                • F If you change the name of the printer, input a new name.

                  176
                  • F If you change the name of the printer, input a new name.

                    176
                  • “Printer x” is assigned to the printer according to the number of the selected printer.

                    176
                • G As Type, select

                  176
                  • G As Type, select

                    176
                  • The IRQ, Buffer size, Starting form, and Queue service mode are automatically configured.

                    176
                • H Press

                  176
                  • H Press

                    176
                • I Press

                  176
                  • I Press

                    176
            • N Assign print queues to the created printer as follows.

              176
              • N Assign print queues to the created printer as follows.

                176
              • A In the

                176
                • A In the

                  176
                  • A In the

                    176
                • B Select the printer created in the Step L.

                  176
                  • B Select the printer created in the Step L.

                    176
                • C Press

                  176
                  • C Press

                    176
                  • You can select more than one queue at a time.

                    176
                    • You can select more than one queue at a time.

                      176
                • D Follow the instructions on the screen to make other necessary settings.

                  176
                  • D Follow the instructions on the screen to make other necessary settings.

                    176
                  • When you have finished the above steps, make sure that the queues are assigned.

                    176
            • O Press

              176
              • O Press

                176
            • P Start the print server by inputting as follows from the console of the NetWare Server.

              177
              • P Start the print server by inputting as follows from the console of the NetWare Server.

                177
              • If it is running, restart it after exiting it.

                177
              • To exit

                177
                • To exit

                  177
                  • To exit

                    177
                  • CAREE: unload pserver

                    177
                    • CAREE: unload pserver

                      177
                • To start

                  177
                  • To start

                    177
                  • CAREE: load pserver

                    177
                    • CAREE: load pserver

                      177
              • If the printer works as configured, “Waiting for job” appears.

                177
                • If the printer works as configured, “Waiting for job” appears.

                  177
    • NetWare 4.x Configuration

      178
      • NetWare 4.x Configuration

        178
      • The actual procedures for configuring your printer differ depending on whether the Network Interf...

        178
        • The actual procedures for configuring your printer differ depending on whether the Network Interf...

          178
      • The following procedures use the Property Sheet method in configuring the Network Interface Board...

        178
        • The following procedures use the Property Sheet method in configuring the Network Interface Board...

          178
      • This section assumes NetWare is functional and that the necessary environment for the NetWare Pri...

        178
        • This section assumes NetWare is functional and that the necessary environment for the NetWare Pri...

          178
          • This section assumes NetWare is functional and that the necessary environment for the NetWare Pri...

            178
          • You should install the NetWare client 32 or the IntranetWare Client on the Windows before running...

            178
      • Setting Up as Print Server

        178
        • Setting Up as Print Server

          178
        • You must use the NDS mode when setting up as a print server in NetWare 4.x.

          178
          • You must use the NDS mode when setting up as a print server in NetWare 4.x.

            178
            • You must use the NDS mode when setting up as a print server in NetWare 4.x.

              178
          • A Log in to the print server as Admin.

            178
            • A Log in to the print server as Admin.

              178
              • A Log in to the print server as Admin.

                178
            • B Run the NIB Setup Tool.

              178
              • B Run the NIB Setup Tool.

                178
              • “Running the NIB Setup Tool” (fi P.25.

                178
                • “Running the NIB Setup Tool” (fi P.25.

                  178
                  • “Running the NIB Setup Tool” (fi P.25.

                    178
            • C Click

              179
              • C Click

                179
              • The Browse dialog of the Network Interface Board appears.

                179
            • D Click

              179
              • D Click

                179
            • E

              179
            • F Select the name of the Network Interface Board which is to be configured by clicking it, and click

              179
              • F Select the name of the Network Interface Board which is to be configured by clicking it, and click

                179
              • If you don't know which Network Interface Board you are configuring, print the Configuration Page...

                179
                • If you don't know which Network Interface Board you are configuring, print the Configuration Page...

                  179
            • G Confirm that the MAC and IPX addresses are correct, and click

              179
              • G Confirm that the MAC and IPX addresses are correct, and click

                179
              • NIB Setup Tool

                179
                • NIB Setup Tool

                  179
            • H Click

              179
              • H Click

                179
              • The property sheet appears.

                179
            • I Click the

              179
              • I Click the

                179
              • A In the

                179
                • A In the

                  179
                  • A In the

                    179
                • B In the

                  179
                  • B In the

                    179
                  • Clicking

                    179
                • C In the

                  179
                  • C In the

                    179
                  • Clicking

                    179
                  • Object names must be input from a lower level and divided by a period. For example, if you want t...

                    179
                    • Object names must be input from a lower level and divided by a period. For example, if you want t...

                      179
                • D In the

                  179
                  • D In the

                    179
                • E Click

                  179
                  • E Click

                    179
                • F After the message appears to confirm the reboot, click

                  179
                  • F After the message appears to confirm the reboot, click

                    179
            • J In the

              179
              • J In the

                179
            • K From Windows, run NWadmin.

              179
              • K From Windows, run NWadmin.

                179
              • The actual NWadmin programs differ depending on the version of it and that of the operating syste...

                180
                • The actual NWadmin programs differ depending on the version of it and that of the operating syste...

                  180
                • The NWadmin programs are located in the PUBLIC directory in the SYS volume except the NWADMIN95.E...

                  180
                • For more information on NetWare Administrator, see the documentation that comes with the NetWare.

                  180
            • L Create a print queue as follows.

              180
              • L Create a print queue as follows.

                180
              • A Select the container object the print queue is located in among those in the directory tree, an...

                180
                • A Select the container object the print queue is located in among those in the directory tree, an...

                  180
                  • A Select the container object the print queue is located in among those in the directory tree, an...

                    180
                • B In the

                  180
                  • B In the

                    180
                • C In the

                  180
                  • C In the

                    180
                • D In the

                  180
                  • D In the

                    180
                • E In the

                  180
                  • E In the

                    180
                  • Select the volume on the file server specified in the NIB Setup Tool. (Step H-B).

                    180
                    • Select the volume on the file server specified in the NIB Setup Tool. (Step H-B).

                      180
                • F After confirming the settings, click

                  180
                  • F After confirming the settings, click

                    180
            • M Create a printer as follows.

              180
              • M Create a printer as follows.

                180
              • A Select the container object the printer is located in, and click

                180
                • A Select the container object the printer is located in, and click

                  180
                  • A Select the container object the printer is located in, and click

                    180
                • B In the

                  180
                  • B In the

                    180
                • C In the

                  180
                  • C In the

                    180
                • D Click

                  180
                  • D Click

                    180
            • N Assign print queues to the created printer as follows.

              180
              • N Assign print queues to the created printer as follows.

                180
              • A Click

                180
                • A Click

                  180
                  • A Click

                    180
                • B In the

                  180
                  • B In the

                    180
                • C Click

                  180
                  • C Click

                    180
                • D Click

                  180
                  • D Click

                    180
                • E After confirming the settings, click

                  180
                  • E After confirming the settings, click

                    180
            • O Create a print server as follows.

              181
              • O Create a print server as follows.

                181
              • A Select the context specified using the NIB Setup Tool (Step H-C), and in the

                181
                • A Select the context specified using the NIB Setup Tool (Step H-C), and in the

                  181
                  • A Select the context specified using the NIB Setup Tool (Step H-C), and in the

                    181
                • B In the

                  181
                  • B In the

                    181
                • C In the

                  181
                  • C In the

                    181
                  • Use the same name as that specified using the NIB Setup Tool. (Step H- A).

                    181
                    • Use the same name as that specified using the NIB Setup Tool. (Step H- A).

                      181
                • D Click

                  181
                  • D Click

                    181
            • P Assign the printer to the created print server as follows.

              181
              • P Assign the printer to the created print server as follows.

                181
              • A Click

                181
                • A Click

                  181
                  • A Click

                    181
                • B In the

                  181
                  • B In the

                    181
                • C After confirming the settings, click

                  181
                  • C After confirming the settings, click

                    181
            • Q Turn the printer power off and on.

              181
              • Q Turn the printer power off and on.

                181
              • To confirm if the printer is configured correctly, enter as follows from the command prompt.

                181
                • To confirm if the printer is configured correctly, enter as follows from the command prompt.

                  181
      • Setting Up as Remote Printer

        181
        • Setting Up as Remote Printer

          181
        • You should use the NDS mode when setting up as a print server in NetWare 4.x.

          181
          • You should use the NDS mode when setting up as a print server in NetWare 4.x.

            181
            • You should use the NDS mode when setting up as a print server in NetWare 4.x.

              181
              • You should use the NDS mode when setting up as a print server in NetWare 4.x.

                181
            • A Log in to the print server as Admin.

              181
              • A Log in to the print server as Admin.

                181
            • B Run the NIB Setup Tool.

              181
              • B Run the NIB Setup Tool.

                181
              • “Running the NIB Setup Tool” (fi P.25.

                181
                • “Running the NIB Setup Tool” (fi P.25.

                  181
                  • “Running the NIB Setup Tool” (fi P.25.

                    181
            • C Click

              181
              • C Click

                181
              • The Browse dialog of the Network Interface Board appears.

                181
            • D Click

              181
              • D Click

                181
            • E

              182
            • F Select the name of the Network Interface Board which is to be configured by clicking it, and click

              182
              • F Select the name of the Network Interface Board which is to be configured by clicking it, and click

                182
              • If you don't know which Network Interface Board you are configuring, print the Configuration Page...

                182
                • If you don't know which Network Interface Board you are configuring, print the Configuration Page...

                  182
            • G Confirm that the MAC and IPX addresses are correct, and click

              182
              • G Confirm that the MAC and IPX addresses are correct, and click

                182
              • NIB Setup Tool

                182
                • NIB Setup Tool

                  182
            • H Click

              182
              • H Click

                182
              • The property sheet appears.

                182
            • I Click the

              182
              • I Click the

                182
              • A In the

                182
                • A In the

                  182
                  • A In the

                    182
                • B In the

                  182
                  • B In the

                    182
                  • Clicking

                    182
                • C In the

                  182
                  • C In the

                    182
                  • Clicking

                    182
                  • Object names must be input from a lower level and divided by a period. For example, if you want t...

                    182
                    • Object names must be input from a lower level and divided by a period. For example, if you want t...

                      182
                • D In the

                  182
                  • D In the

                    182
                • E In the

                  182
                  • E In the

                    182
                  • Use the same number as that of the printer to be created in the print server.

                    182
                    • Use the same number as that of the printer to be created in the print server.

                      182
                • F

                  182
                • G Click

                  182
                  • G Click

                    182
                • H After the message appears to confirm the reboot, click

                  182
                  • H After the message appears to confirm the reboot, click

                    182
            • J In the

              182
              • J In the

                182
            • K From Windows, run NWadmin.

              182
              • K From Windows, run NWadmin.

                182
              • The actual NWadmin programs differ depending on the version of it and that of the operating syste...

                183
                • The actual NWadmin programs differ depending on the version of it and that of the operating syste...

                  183
                • The NWadmin programs are located in the PUBLIC directory in the SYS volume except the NWADMIN95.E...

                  183
                • For more information on NetWare Administrator, see the documentation that comes with the NetWare.

                  183
            • L Create a print queue as follows.

              183
              • L Create a print queue as follows.

                183
              • A Select the container object the print queue is located in among those in the directory tree, an...

                183
                • A Select the container object the print queue is located in among those in the directory tree, an...

                  183
                  • A Select the container object the print queue is located in among those in the directory tree, an...

                    183
                • B In the

                  183
                  • B In the

                    183
                • C In the

                  183
                  • C In the

                    183
                • D In the

                  183
                  • D In the

                    183
                • E In the

                  183
                  • E In the

                    183
                • F After confirming the settings, click

                  183
                  • F After confirming the settings, click

                    183
            • M Create a printer as follows.

              183
              • M Create a printer as follows.

                183
              • A Select the container object the printer is located in, and click

                183
                • A Select the container object the printer is located in, and click

                  183
                  • A Select the container object the printer is located in, and click

                    183
                • B In the

                  183
                  • B In the

                    183
                • C In the

                  183
                  • C In the

                    183
                • D Click

                  183
                  • D Click

                    183
            • N Assign print queues to the created printer as follows.

              183
              • N Assign print queues to the created printer as follows.

                183
              • A Click

                183
                • A Click

                  183
                  • A Click

                    183
                • B In the

                  183
                  • B In the

                    183
                • C Click

                  183
                  • C Click

                    183
                • D Click

                  183
                  • D Click

                    183
                • E After confirming the settings, click

                  183
                  • E After confirming the settings, click

                    183
            • O Create a print server as follows.

              183
              • O Create a print server as follows.

                183
              • A Select the context specified using the NIB Setup Tool (Step H-C), and in the

                183
                • A Select the context specified using the NIB Setup Tool (Step H-C), and in the

                  183
                  • A Select the context specified using the NIB Setup Tool (Step H-C), and in the

                    183
                • B In the

                  184
                  • B In the

                    184
                • C In the

                  184
                  • C In the

                    184
                  • Use the same name as that specified using the NIB Setup Tool. (Step H- A).

                    184
                    • Use the same name as that specified using the NIB Setup Tool. (Step H- A).

                      184
                • D Click

                  184
                  • D Click

                    184
            • P Assign the printer to the created print server as follows.

              184
              • P Assign the printer to the created print server as follows.

                184
              • A Click

                184
                • A Click

                  184
                  • A Click

                    184
                • B In the

                  184
                  • B In the

                    184
                • C In the

                  184
                  • C In the

                    184
                • D Input the printer number and click

                  184
                  • D Input the printer number and click

                    184
                  • Use the same number as that specified as Remote Printer No. using the NIB Setup Tool. (Step H-E).

                    184
                    • Use the same number as that specified as Remote Printer No. using the NIB Setup Tool. (Step H-E).

                      184
                • E After confirming the settings, click

                  184
                  • E After confirming the settings, click

                    184
            • Q Start the print server by inputting as follows from the console of the NetWare Server.

              184
              • Q Start the print server by inputting as follows from the console of the NetWare Server.

                184
              • If it is running, restart it after exiting it.

                184
              • To exit

                184
                • To exit

                  184
                  • To exit

                    184
                    • To exit

                      184
                    • CAREE: unload pserver

                      184
                      • CAREE: unload pserver

                        184
                        • CAREE: unload pserver

                          184
                  • To start

                    184
                    • To start

                      184
                    • CAREE: load pserver

                      184
                      • CAREE: load pserver

                        184
                        • CAREE: load pserver

                          184
    • Setting Up a Client Computer

      185
      • Setting Up a Client Computer

        185
      • This section describes how to set up a client computer when you use a NetWare print server.

        185
        • This section describes how to set up a client computer when you use a NetWare print server.

          185
      • This section assumes that the client has NetWare client applications installed and is correctly c...

        185
        • This section assumes that the client has NetWare client applications installed and is correctly c...

          185
          • This section assumes that the client has NetWare client applications installed and is correctly c...

            185
      • Windows95/98

        185
        • Windows95/98

          185
        • Follow these steps to setting up a Windows 95/98 client.

          185
          • Follow these steps to setting up a Windows 95/98 client.

            185
        • Log in to the NetWare file server before starting the following procedure.

          185
          • Log in to the NetWare file server before starting the following procedure.

            185
        • A Install the printer driver of the printer you want to use as “Local printer”.

          185
          • A Install the printer driver of the printer you want to use as “Local printer”.

            185
            • A Install the printer driver of the printer you want to use as “Local printer”.

              185
              • A Install the printer driver of the printer you want to use as “Local printer”.

                185
              • For more information on installing the printer driver, refer to the Operating Instructions of you...

                185
                • For more information on installing the printer driver, refer to the Operating Instructions of you...

                  185
              • Any port is selected during the installation, however, LPT1 is recommended.

                185
                • Any port is selected during the installation, however, LPT1 is recommended.

                  185
            • B Click

              185
              • B Click

                185
            • C In the

              185
              • C In the

                185
            • D On the

              185
              • D On the

                185
            • E Click

              185
              • E Click

                185
            • F Click

              185
              • F Click

                185
            • G On the network tree, double-click the name of the computer used as the print server.

              185
              • G On the network tree, double-click the name of the computer used as the print server.

                185
              • The names of the printers attached to the network are displayed.

                185
            • H Click the queue you want to print to highlight it, and click

              185
              • H Click the queue you want to print to highlight it, and click

                185
            • I Click

              185
              • I Click

                185
              • In the

                185
            • J Click

              185
              • J Click

                185
            • K Click the

              186
              • K Click the

                186
            • L Remove the ' marks from the

              186
              • L Remove the ' marks from the

                186
              • You should not check these boxes here, since they should be specified using the printer driver. I...

                186
                • You should not check these boxes here, since they should be specified using the printer driver. I...

                  186
              • When Using the PostScript Printer Driver

                186
                • When Using the PostScript Printer Driver

                  186
                • Follow these steps to set up for the PostScript Printer Driver

                  186
                • A Click the

                  186
                  • A Click the

                    186
                • B Click

                  186
                  • B Click

                    186
                • C Remove the ' marks from the

                  186
                  • C Remove the ' marks from the

                    186
            • M Click

              186
              • M Click

                186
      • Windows 3.1x

        186
        • Windows 3.1x

          186
        • Follow these steps to setting up a Windows 3.1x client.

          186
          • Follow these steps to setting up a Windows 3.1x client.

            186
        • A Install the printer driver of the printer you want to use as “Local printer”.

          186
          • A Install the printer driver of the printer you want to use as “Local printer”.

            186
            • A Install the printer driver of the printer you want to use as “Local printer”.

              186
              • A Install the printer driver of the printer you want to use as “Local printer”.

                186
              • For more information on installing the printer driver, refer to the Operating Instructions of you...

                186
                • For more information on installing the printer driver, refer to the Operating Instructions of you...

                  186
            • B Double-click the

              186
              • B Double-click the

                186
            • C In the

              186
              • C In the

                186
            • D In the

              186
              • D In the

                186
              • The Network driver dialog appears.

                186
            • E In the

              186
              • E In the

                186
              • You should log in to the print server in order to see the print queues.

                186
                • You should log in to the print server in order to see the print queues.

                  186
            • F Click

              186
              • F Click

                186
              • The specified queue is captured to the LPT1.

                186
            • G Click

              187
              • G Click

                187
              • NetWare Settings

                187
                • NetWare Settings

                  187
            • H Remove the ¥ marks from the

              187
              • H Remove the ¥ marks from the

                187
              • You should not check these boxes here, since they should be specified using the printer driver. I...

                187
                • You should not check these boxes here, since they should be specified using the printer driver. I...

                  187
            • I Click

              187
              • I Click

                187
            • J Close the Network driver.

              187
              • J Close the Network driver.

                187
            • K Click

              187
              • K Click

                187
            • L Click

              187
              • L Click

                187
  • 4. Macintosh Configuration

    188
    • 4. Macintosh Configuration

      188
    • Configuring Macintosh

      188
      • Configuring Macintosh

        188
      • This chapter explains how to configure a network printer in a Macintosh Ethertalk environment. Th...

        188
        • This chapter explains how to configure a network printer in a Macintosh Ethertalk environment. Th...

          188
        • <GRAPHIC>

          188
        • To print from a Macintosh, the optional PostScript kit is required.

          188
          • To print from a Macintosh, the optional PostScript kit is required.

            188
      • Changing to EtherTalk

        188
        • Changing to EtherTalk

          188
        • Follow these steps to configure the Macintosh to use EtherTalk.

          188
          • Follow these steps to configure the Macintosh to use EtherTalk.

            188
          • For information on installing the software required for EtherTalk, refer to the Macintosh manuals.

            188
            • For information on installing the software required for EtherTalk, refer to the Macintosh manuals.

              188
          • A Open

            188
            • A Open

              188
              • A Open

                188
            • B Select “Ethernet” from the

              188
              • B Select “Ethernet” from the

                188
            • C If you change zones, select a name from the

              188
              • C If you change zones, select a name from the

                188
            • D Close the

              188
              • D Close the

                188
            • E Restart the Macintosh.

              188
              • E Restart the Macintosh.

                188
      • Configuring the Printer

        189
        • Configuring the Printer

          189
        • Use the operation panel to activate the AppleTalk protocol (factory default is active).

          189
          • Use the operation panel to activate the AppleTalk protocol (factory default is active).

            189
          • For information on configuration, refer to the Operating Instructions of your printer.

            189
            • For information on configuration, refer to the Operating Instructions of your printer.

              189
      • Changing Printer Name

        189
        • Changing Printer Name

          189
        • If the network has several same model printers, the names will be the same. Printers that have th...

          189
          • If the network has several same model printers, the names will be the same. Printers that have th...

            189
          • Use applications such as

            189
      • Changing Zone

        189
        • Changing Zone

          189
        • It may be necessary to change the zone configuration.

          189
          • It may be necessary to change the zone configuration.

            189
          • Use applications such as

            189
  • 5. UNIX Configuration

    190
    • 5. UNIX Configuration

      190
    • This chapter explains how to set up a network printer and check the print status using UNIX.

      190
      • This chapter explains how to set up a network printer and check the print status using UNIX.

        190
      • If the printer language is IPDL-C, you cannot print from a UNIX workstation. The optional PostScr...

        190
        • If the printer language is IPDL-C, you cannot print from a UNIX workstation. The optional PostScr...

          190
    • Installing with the Installation Shell Script

      191
      • Installing with the Installation Shell Script

        191
      • The installation shell script helps with the setup process. The installation shell script automat...

        191
        • The installation shell script helps with the setup process. The installation shell script automat...

          191
      • The installation shell script supports the following four kinds of workstation. Do not use this i...

        191
        • The installation shell script supports the following four kinds of workstation. Do not use this i...

          191
        • When you use NIS (Network Information Service) or DNS, you should configure the server before run...

          191
        • Refer to the manual that came with the printer configuration utility of your OS for additional in...

          191
      • Assigning IP Address

        191
        • Assigning IP Address

          191
        • Configure your printer to use the TCP/IP protocol.

          191
          • Configure your printer to use the TCP/IP protocol.

            191
        • For more information on how to make above settings, refer to the Operating Instructions on your p...

          192
          • For more information on how to make above settings, refer to the Operating Instructions on your p...

            192
            • For more information on how to make above settings, refer to the Operating Instructions on your p...

              192
        • Confirming IP Address

          192
          • Confirming IP Address

            192
          • Follow these steps to confirm that the IP address has been configured correctly.

            192
            • Follow these steps to confirm that the IP address has been configured correctly.

              192
          • A Input the following. (Example IP address is 192.168.15.16)

            192
            • A Input the following. (Example IP address is 192.168.15.16)

              192
              • A Input the following. (Example IP address is 192.168.15.16)

                192
                • A Input the following. (Example IP address is 192.168.15.16)

                  192
                • # ping 192.168.15.16

                  192
                  • # ping 192.168.15.16

                    192
                • If the address has been configured correctly, the following message appears.

                  192
                • If the address has been configured incorrectly, the following message appears.

                  192
                • no answer from 192.168.15.16

                  192
                  • no answer from 192.168.15.16

                    192
                • When you use NIS, the IP address and host name is written to /etc/hosts on the master server. Whe...

                  192
                  • When you use NIS, the IP address and host name is written to /etc/hosts on the master server. Whe...

                    192
      • Executing the Installation Shell Script

        192
        • Executing the Installation Shell Script

          192
        • After having configured the printer with an IP address, follow these steps to use the installatio...

          192
          • After having configured the printer with an IP address, follow these steps to use the installatio...

            192
        • Use ftp to get the installation shell script from the printer.

          192
          • Use ftp to get the installation shell script from the printer.

            192
            • Use ftp to get the installation shell script from the printer.

              192
          • A Log in with root to the workstation.

            192
            • A Log in with root to the workstation.

              192
              • A Log in with root to the workstation.

                192
              • If you do not log in with root, the installation shell script will not run.

                192
                • If you do not log in with root, the installation shell script will not run.

                  192
            • B Get installation shell script from the printer.

              192
              • B Get installation shell script from the printer.

                192
              • A Move to the directory copying installation shell script.

                192
                • A Move to the directory copying installation shell script.

                  192
                  • A Move to the directory copying installation shell script.

                    192
                • B Use ftp to connect to the printer having the IP address that you just configured.

                  192
                  • B Use ftp to connect to the printer having the IP address that you just configured.

                    192
                  • # ftp 192.168.15.16 Connected to 192.168.15.16 220 printer FTP server ready. Name (192.168.15.16:...

                    192
                    • # ftp 192.168.15.16 Connected to 192.168.15.16 220 printer FTP server ready. Name (192.168.15.16:...

                      192
                • C When a user name is requested, input nothing, and press

                  193
                  • C When a user name is requested, input nothing, and press

                    193
                  • 331 Password required for root. Password:

                    193
                    • 331 Password required for root. Password:

                      193
                • D When a password is requested, input nothing, and press

                  193
                  • D When a password is requested, input nothing, and press

                    193
                  • 230 User root logged in. ftp>

                    193
                    • 230 User root logged in. ftp>

                      193
                • E Type the following to get the installation shell script.

                  193
                  • E Type the following to get the installation shell script.

                    193
                  • ftp> get install

                    193
                    • ftp> get install

                      193
                • F Close the ftp session.

                  193
                  • F Close the ftp session.

                    193
                  • ftp> bye 221 Goodbye. #

                    193
                    • ftp> bye 221 Goodbye. #

                      193
            • C Run the installation shell script.

              193
              • C Run the installation shell script.

                193
              • # sh ./install

                193
                • # sh ./install

                  193
              • The current directory must be followed by a period.

                193
                • The current directory must be followed by a period.

                  193
            • D Input a number to select the workstation OS that you are using.

              193
              • D Input a number to select the workstation OS that you are using.

                193
              • Network printer install shell Copyright RICOH CO.,LTD. 1994-1998 Select your workstation OS type....

                193
                • Network printer install shell Copyright RICOH CO.,LTD. 1994-1998 Select your workstation OS type....

                  193
              • When you select “5”, the installation shell script closes.

                193
                • When you select “5”, the installation shell script closes.

                  193
            • E Input the IP address of your printer.

              193
              • E Input the IP address of your printer.

                193
              • Enter Printer host IP address <xxx.xxx.xxx.xxx> [return=skip]: 192.168.15.16

                193
                • Enter Printer host IP address <xxx.xxx.xxx.xxx> [return=skip]: 192.168.15.16

                  193
              • The IP address is added to the /etc/hosts file.

                193
                • The IP address is added to the /etc/hosts file.

                  193
                • If the host name of the printer has already been configured, input nothing and press

                  194
            • F Input the host name of a printer.

              194
              • F Input the host name of a printer.

                194
              • Enter Printer host name : pomelo

                194
                • Enter Printer host name : pomelo

                  194
              • The host name is added to the /etc/hosts file.

                194
                • The host name is added to the /etc/hosts file.

                  194
                • If the IP address entered with procedure E, nothing is added to the /etc/ hosts file.

                  194
            • G Configure the printer name.

              194
              • G Configure the printer name.

                194
              • It is configured as the name appearing in “default” when you press

                194
              • The printer name is added to the /etc/printcap file.

                194
                • The printer name is added to the /etc/printcap file.

                  194
                • The host name that was saved in step F followed by “_prn” appears in “default”. If no host name i...

                  194
            • H To set the print option, input “filetype=RPS”, because you must use PostScript when printing fr...

              194
              • H To set the print option, input “filetype=RPS”, because you must use PostScript when printing fr...

                194
              • Enter remote printer name [default filetype=P01]: filetype=RPS hosts file is modified #

                194
                • Enter remote printer name [default filetype=P01]: filetype=RPS hosts file is modified #

                  194
              • “filetype=RPS” can be shortened to “fil=RPS”.

                194
                • “filetype=RPS” can be shortened to “fil=RPS”.

                  194
                • Use “filetype_RPS” or “fil_RPS” when using Solaris 2.6. in place of “filetype=RPS”.

                  194
              • Setup with installation shell script is finished.

                194
              • Print option is writen in “rp” capability of /etc/printcap file

                194
                • Print option is writen in “rp” capability of /etc/printcap file

                  194
            • I Make a test print to confirm that the settings are correct.

              194
              • I Make a test print to confirm that the settings are correct.

                194
              • # lpr -Ppomelo_prn file_name

                194
      • Executing the Installation Shell Script

        195
        • Executing the Installation Shell Script

          195
        • The printing environment is set up automatically when the installation shell script is executed.

          195
          • The printing environment is set up automatically when the installation shell script is executed.

            195
          • This section explains the contents of the set up when the installation shell script is executed b...

            195
        • When the installation shell script is not used for the setup, refer to the workstation operation ...

          195
          • When the installation shell script is not used for the setup, refer to the workstation operation ...

            195
            • When the installation shell script is not used for the setup, refer to the workstation operation ...

              195
        • Adding the IP Address and Host Name to the /etc/hosts File

          195
          • Adding the IP Address and Host Name to the /etc/hosts File

            195
          • The following line is added to the /etc/hosts file.

            195
            • The following line is added to the /etc/hosts file.

              195
            • 192.168.15.16 pomelo # Network Printer

              195
              • 192.168.15.16 pomelo # Network Printer

                195
            • • 192.168.15.16

              195
              • • 192.168.15.16

                195
                • • 192.168.15.16

                  195
                  • • 192.168.15.16

                    195
            • The /etc/hosts file contains a list of the IP addresses and their host names of all of the hosts ...

              195
              • The /etc/hosts file contains a list of the IP addresses and their host names of all of the hosts ...

                195
              • If you do not use NIS or DNS, you must manually enter the IP address and host name of each workst...

                195
        • Adding an Entry to the /etc/printcap file.

          195
          • Adding an Entry to the /etc/printcap file.

            195
          • The following entry is added to the /etc/printcap file.

            195
            • The following entry is added to the /etc/printcap file.

              195
            • This is the configuration for printing with the lpr command. In order to use the lpr command to p...

              195
            • pomelo_prn|Ricoh Network Printer:\ :rm=pomelo:\ :rp=filetype=RPS:\ :sd=/usr/spool/pomelo_prnd:\ :...

              195
              • pomelo_prn|Ricoh Network Printer:\ :rm=pomelo:\ :rp=filetype=RPS:\ :sd=/usr/spool/pomelo_prnd:\ :...

                195
            • The /etc/printcap file is used to register the name and attributes of a printer. You must make an...

              195
              • The /etc/printcap file is used to register the name and attributes of a printer. You must make an...

                195
              • One entry is separated with colons into several fields. The syntax is to begin each entry with a ...

                196
              • The first line of the field is the name of the printer. You use this name when logging on to a ne...

                196
              • The second, and the following lines, contain your printer's attributes. Attributes of the printer...

                196
              • <TABLE>

                196
                • <TABLE>

                  196
                  • <TABLE HEADING>

                    196
                    • <TABLE ROW>

                      196
                      • Capability

                        196
                      • Explanation

                        196
                      • Setting Value Required for Network Printer.

                        196
                  • <TABLE BODY>

                    196
                    • <TABLE ROW>

                      196
                      • lp

                        196
                      • Device name of printer

                        196
                      • Nothing.

                        196
                    • <TABLE ROW>

                      196
                      • rm

                        196
                      • Host name of printer

                        196
                      • The host name that was registered with /etc/hosts file.

                        196
                    • <TABLE ROW>

                      196
                      • rp

                        196
                      • Optional specification

                        196
                      • Appoint PostScript.

                        196
                    • <TABLE ROW>

                      196
                      • sd

                        196
                      • Path name of spool directory.

                        196
                      • Path name of the spool directory that is to be created.

                        196
                    • <TABLE ROW>

                      196
                      • lf

                        196
                      • Path name of log file.

                        196
                      • Path name of log file.

                        196
                        • Path name of log file.

                          196
                        • For example /usr/adm/lpd- errs.

                          196
                    • <TABLE ROW>

                      196
                      • mx

                        196
                      • Maximum file size which directory can copy. When set to 0, the size is unlimited. If nothing is e...

                        196
                      • Nothing or something suitable.

                        196
        • Making the Spool Directory

          196
          • Making the Spool Directory

            196
          • The spool directory is created in the /usr/spool/ directory. Directory name is the name of the pr...

            196
            • The spool directory is created in the /usr/spool/ directory. Directory name is the name of the pr...

              196
          • The spool directory is used to control the data used for a print job. For example, when a print j...

            196
            • The spool directory is used to control the data used for a print job. For example, when a print j...

              196
              • The spool directory is used to control the data used for a print job. For example, when a print j...

                196
              • A spool directory is made for every entry of the network printer written to the /etc/printcap file.

                196
              • You should match spool directory with sd capability in /etc/printcap file, and configure in daemo...

                196
        • Making of Log File

          197
          • Making of Log File

            197
          • Log file of error messages is created in the /usr/adm directory. The log file name is the name th...

            197
            • Log file of error messages is created in the /usr/adm directory. The log file name is the name th...

              197
    • Printing Method

      198
      • Printing Method

        198
      • Depending on the type of work station being used, input the following.

        198
        • Depending on the type of work station being used, input the following.

          198
        • BSD UNIX workstation

          198
          • BSD UNIX workstation

            198
            • BSD UNIX workstation

              198
              • BSD UNIX workstation

                198
              • % lpr -P

                198
                • % lpr -P

                  198
                • For example:

                  198
                • printer name is r_prn, file names are file1 and file2

                  198
                • % lpr -P

                  198
        • Solaris, HP-UX

          198
          • Solaris, HP-UX

            198
            • Solaris, HP-UX

              198
              • Solaris, HP-UX

                198
              • % lp -d

                198
                • % lp -d

                  198
                • For example:

                  198
                • printer name is r_prn, file names are file1 and file2

                  198
                • % lp -d

                  198
        • Printer_name is the name that was entered with installation shell script.

          198
          • Printer_name is the name that was entered with installation shell script.

            198
          • You can use wild cards ( * or ? ) for the file name.

            198
          • Print using the PostScript format.

            198
          • The message “print requests full” appears when the maximum number of print requests have been rea...

            198
      • Printing with rsh, rcp, ftp

        198
        • Printing with rsh, rcp, ftp

          198
        • You can also print using the rsh, rcp and ftp commands.

          198
          • You can also print using the rsh, rcp and ftp commands.

            198
        • Print using the PostScript format.

          198
          • Print using the PostScript format.

            198
            • Print using the PostScript format.

              198
            • The message “print requests full” appears when the maximum number of print requests have been rea...

              198
            • “filetype=RPS” can be omitted with “fil=RPS”.

              198
            • When using Solaris 2.6 use “filetype_RPS” or “fil_RPS” instead of “filetype=RPS”.

              198
        • rsh

          198
          • rsh

            198
          • % rsh

            198
            • % rsh

              198
              • % rsh

                198
            • Host_name is the name that it was installed with the installation shell script.

              199
              • Host_name is the name that it was installed with the installation shell script.

                199
        • rcp

          199
          • rcp

            199
          • To appoint file and print it

            199
            • To appoint file and print it

              199
              • To appoint file and print it

                199
                • To appoint file and print it

                  199
                • % rcp

                  199
                  • % rcp

                    199
              • To print all of the files in a directory

                199
                • To print all of the files in a directory

                  199
                • % rcp -r

                  199
                  • % rcp -r

                    199
            • Host_name is the name that it was installed with the installation shell script.

              199
              • Host_name is the name that it was installed with the installation shell script.

                199
              • You can use wild cards ( * or ? ) for the file name.

                199
        • ftp

          199
          • ftp

            199
          • Depending on the number of files to be printed use the put or mput commands.

            199
            • Depending on the number of files to be printed use the put or mput commands.

              199
          • File names cannot contain “=” or “,”.

            199
            • File names cannot contain “=” or “,”.

              199
              • File names cannot contain “=” or “,”.

                199
            • To print one file

              199
              • To print one file

                199
                • To print one file

                  199
                  • To print one file

                    199
                  • ftp> put

                    199
                    • ftp> put

                      199
                • To print several files

                  199
                  • To print several files

                    199
                  • ftp> mput

                    199
                    • ftp> mput

                      199
                    • To print using the mput command you must first set the printer emulation to R-PS2. You cannot pri...

                      199
                      • To print using the mput command you must first set the printer emulation to R-PS2. You cannot pri...

                        199
                    • You can use wild cards ( * or ? ) for the file name with the mput command.

                      199
                      • You can use wild cards ( * or ? ) for the file name with the mput command.

                        199
            • The following shows an example of how to print a file using ftp.

              199
            • A Start ftp using the IP address or host name of the printer.

              199
              • A Start ftp using the IP address or host name of the printer.

                199
                • A Start ftp using the IP address or host name of the printer.

                  199
                • % ftp

                  199
                  • % ftp

                    199
                • Host_name is the name that it was installed with the installation shell script.

                  199
                  • Host_name is the name that it was installed with the installation shell script.

                    199
              • B Input the user name, for the password input nothing, and then press

                199
                • B Input the user name, for the password input nothing, and then press

                  199
                • Name: Password:

                  199
                  • Name: Password:

                    199
              • C Set the file transfer mode to binary.

                199
                • C Set the file transfer mode to binary.

                  199
                • ftp> bin

                  199
                  • ftp> bin

                    199
              • D Print the file.

                199
                • D Print the file.

                  199
                • The following is an example of printing a file named file1

                  199
                  • The following is an example of printing a file named file1

                    199
                  • The following is an example of printing two files, named file1 and file2

                    200
              • E Finish ftp.

                200
                • E Finish ftp.

                  200
                • ftp> bye

                  200
                  • ftp> bye

                    200
    • Status Representation of Printer

      201
      • Status Representation of Printer

        201
      • If you use a BSD UNIX workstation, you can use the following commands to have information and the...

        201
        • If you use a BSD UNIX workstation, you can use the following commands to have information and the...

          201
      • Displaying INformation

        201
        • Displaying INformation

          201
        • Use the lpq command to display the status of the printer or information on the print job.

          201
          • Use the lpq command to display the status of the printer or information on the print job.

            201
          • % lpq -P

            201
            • % lpq -P

              201
          • Use the rsh command or ftp to display information about the specified parameter.

            201
          • % rsh

            201
            • % rsh

              201
          • % ftp

            201
            • % ftp

              201
          • These are the parameters that can be used with rsh, rcp and ftp.

            201
          • <TABLE>

            201
            • <TABLE>

              201
              • <TABLE HEADING>

                201
                • <TABLE ROW>

                  201
                  • Parameter

                    201
                  • The contents which you can display and copy.

                    201
                  • Reference point

                    201
              • <TABLE BODY>

                201
                • <TABLE ROW>

                  201
                  • stat

                    201
                  • Status of the printer.

                    201
                  • Operating Instructions of Printer

                    201
                • <TABLE ROW>

                  201
                  • Information about the print job.

                    201
                  • fi P.75

                    201
                    • fi P.75

                      201
                • <TABLE ROW>

                  201
                  • info

                    201
                  • Information about the paper tray, output tray, emulation, program of the printer.

                    201
                  • Operating Instructions of Printer

                    201
                • <TABLE ROW>

                  201
                  • prnlog

                    201
                  • Record of the last 10 jobs printed.

                    201
                  • fi P.75

                    201
                    • fi P.75

                      201
                • <TABLE ROW>

                  201
                  • syslog

                    201
                  • Record of messages about the Network Interface Board.

                    201
                  • fi P.80

                    201
                    • fi P.80

                      201
      • Copying Information to the File

        201
        • Copying Information to the File

          201
        • Use the rcp or ftp commands to copy information about the specified parameters.

          201
          • Use the rcp or ftp commands to copy information about the specified parameters.

            201
        • The same parameters are used as those used in displaying.

          201
          • The same parameters are used as those used in displaying.

            201
            • The same parameters are used as those used in displaying.

              201
          • % rsh

            201
            • % rsh

              201
          • % ftp

            202
            • % ftp

              202
  • 6. Appendix

    204
    • 6. Appendix

      204
    • Multi Direct Print

      204
      • Multi Direct Print

        204
      • Multi Direct Print is a Windows program that allows you to print on a Peer-to- Peer network. This...

        204
        • Multi Direct Print is a Windows program that allows you to print on a Peer-to- Peer network. This...

          204
      • <TABLE>

        204
        • <TABLE>

          204
          • <TABLE>

            204
            • <TABLE HEADING>

              204
              • <TABLE ROW>

                204
                • Requirement

                  204
                • Protocol stack

                  204
            • <TABLE BODY>

              204
              • <TABLE ROW>

                204
                • Microsoft Windows 95/98

                  204
                • The Microsoft version of TCP/IP that comes with Windows.

                  204
              • <TABLE ROW>

                204
                • Microsoft Windows NT 4.0

                  204
      • Select Printer

        204
        • Select Printer

          204
          • Select Printer

            204
        • A list of available printers appears on this screen.

          204
          • A list of available printers appears on this screen.

            204
        • <GRAPHIC>

          204
          • <GRAPHIC>

            204
            • <GRAPHIC>

              204
            • 1. Printer Name

              204
              • 1. Printer Name

                204
                • 1. Printer Name

                  204
                • The name of the printer containing the Network Interface Board appears.

                  204
                • The printer name can be found on the printer configuration page.

                  204
                  • The printer name can be found on the printer configuration page.

                    204
                  • Printer name is set to “RNP” and the final 3 bytes of the MAC address of the Network Interface Bo...

                    204
              • 2. Address

                204
                • 2. Address

                  204
                • The IP address of the printer.

                  204
              • 3. Comment

                204
                • 3. Comment

                  204
                • Comments that are registered on the Network Interface Board.

                  204
              • Refresh

                204
                • Refresh

                  204
                  • Refresh

                    204
                • Click to refresh the contents of the display. When refreshing, the name of this button changes to

                  204
              • About

                204
                • About

                  204
                  • About

                    204
                • Version and copyright information.

                  204
              • 6. Protocol

                205
                • 6. Protocol

                  205
                • Select to display the printers which can print using the selected protocol.

                  205
                • Printers may appear when

                  205
                  • Printers may appear when

                    205
      • Network

        205
        • Network

          205
          • Network

            205
        • When you select a printer with the

          205
          • When you select a printer with the

            205
        • <GRAPHIC>

          205
          • <GRAPHIC>

            205
            • <GRAPHIC>

              205
            • 1. Port Name

              205
              • 1. Port Name

                205
                • 1. Port Name

                  205
                • To select a printer using a host name or a domain name, input the name here. Input the IP address...

                  205
                • You cannot use a host name that begins with “%%”.

                  205
                  • You cannot use a host name that begins with “%%”.

                    205
                • When you use DHCP to assign an IP address to the Network Interface Board, you can use a printer n...

                  205
                  • When you use DHCP to assign an IP address to the Network Interface Board, you can use a printer n...

                    205
              • 2. IP Address

                205
                • 2. IP Address

                  205
                • Input the IP address of the printer.

                  205
                • If you enter information into both the

                  205
                  • If you enter information into both the

                    205
    • Configuring the Network Interface Board with a Web Browser

      206
      • Configuring the Network Interface Board with a Web Browser

        206
      • The Network Interface Board functions as a Web server in addition to allowing a printer to functi...

        206
        • The Network Interface Board functions as a Web server in addition to allowing a printer to functi...

          206
      • Configuring the Printer

        206
        • Configuring the Printer

          206
          • Configuring the Printer

            206
            • Configuring the Printer

              206
            • This facility requires TCP/IP to be installed. After the printer has been configured to use the T...

              206
              • This facility requires TCP/IP to be installed. After the printer has been configured to use the T...

                206
              • For information on configuring the printer to use TCP/IP, refer to the Operating Instructions of ...

                206
                • For information on configuring the printer to use TCP/IP, refer to the Operating Instructions of ...

                  206
          • Operating System Browser Requirements

            206
            • Operating System Browser Requirements

              206
            • <TABLE>

              206
              • <TABLE>

                206
                • <TABLE>

                  206
                  • <TABLE HEADING>

                    206
                    • <TABLE ROW>

                      206
                      • OS

                        206
                      • Browser

                        206
                  • <TABLE BODY>

                    206
                    • <TABLE ROW>

                      206
                      • Microsoft Windows 95/98

                        206
                      • Microsoft Internet Explorer 3.02/4.0

                        206
                        • Microsoft Internet Explorer 3.02/4.0

                          206
                        • Netscape Navigator 3.0/4.0

                          206
                    • <TABLE ROW>

                      206
                      • Microsoft Windows NT 3.51/4.0

                        206
                    • <TABLE ROW>

                      206
                      • MacOS 7.6.1 ~ 8.1

                        206
                    • <TABLE ROW>

                      206
                      • Solaris 2.5 ~ 2.6

                        206
              • Using Windows NT 3.51 with Internet Explorer 3.02 may cause problems.

                206
                • Using Windows NT 3.51 with Internet Explorer 3.02 may cause problems.

                  206
                • Sometimes after clicking

                  206
                • The text on the screen may disappear or be aligned incorrectly if the font size settings of the b...

                  206
      • Going to the Top Page

        206
        • Going to the Top Page

          206
        • After launching your Web browser, enter the IP address of the printer. See the example below.

          206
          • After launching your Web browser, enter the IP address of the printer. See the example below.

            206
          • http://192.168.15.16/

            206
            • http://192.168.15.16/

              206
          • If a DNS server is used in the network, you can enter the host name as an URL. For example, http:...

            206
            • If a DNS server is used in the network, you can enter the host name as an URL. For example, http:...

              206
            • If the network uses proxy servers, the browser may run slowly.

              207
          • <GRAPHIC>

            207
            • <GRAPHIC>

              207
            • 1. Header Button

              207
              • 1. Header Button

                207
                • 1. Header Button

                  207
                • You can register favorite URLs with

                  207
                • The computer must be on a network that has access to the Internet in order to access the Ricoh we...

                  207
                  • The computer must be on a network that has access to the Internet in order to access the Ricoh we...

                    207
                • It costs to use the browser to access a website.

                  207
                  • It costs to use the browser to access a website.

                    207
                • The help file is stored on the CD-ROM in HTML format. It can be found in the “\HELP\WSMHLP\EN\ind...

                  207
                  • The help file is stored on the CD-ROM in HTML format. It can be found in the “\HELP\WSMHLP\EN\ind...

                    207
              • 2. Menu Button

                207
                • 2. Menu Button

                  207
                • Buttons to configure the Network Interface Board and confirm the status of the printer.

                  207
                • When you click

                  207
                  • When you click

                    207
                  • The password is the same as that used in the remote maintenance(mshell).

                    207
              • 3. Representation Area

                207
                • 3. Representation Area

                  207
                • Displays the name and comments of the Network Interface Board, and the status of the printer.

                  207
    • Assigning IP Address with ARP+PING

      208
      • Assigning IP Address with ARP+PING

        208
      • Using TCP/IP, you can assign the IP address using ARP and PING. The following example is for a BS...

        208
        • Using TCP/IP, you can assign the IP address using ARP and PING. The following example is for a BS...

          208
      • ARP+PING should be set to Active in the network boot configuration before assigning the IP addres...

        208
        • ARP+PING should be set to Active in the network boot configuration before assigning the IP addres...

          208
      • A Log in to the workstation as root.

        208
        • A Log in to the workstation as root.

          208
          • A Log in to the workstation as root.

            208
            • A Log in to the workstation as root.

              208
          • B Use the arp command to assign the IP address to the MAC address of the Network Interface Board.

            208
            • B Use the arp command to assign the IP address to the MAC address of the Network Interface Board.

              208
            • # arp -s 192.168.15.16 00:00:74:62:5C:65

              208
            • 192.168.15.16 is the IP address, 00:00:74:62:5C:65 is the MAC address.

              208
              • 192.168.15.16 is the IP address, 00:00:74:62:5C:65 is the MAC address.

                208
          • C Assign the IP address using the PING command.

            208
            • C Assign the IP address using the PING command.

              208
            • # ping 192.168.15.16

              208
          • D Use the PING command again, to confirm the address.

            208
            • D Use the PING command again, to confirm the address.

              208
            • # ping 192.168.15.16

              208
            • If the address has been configured properly, the following message will appear.

              208
            • 192.168.15.16 is alive

              208
            • If the address has been configured incorrectly, the following message will appear.

              208
            • no answer from 192.168.15.16

              208
        • - How to Confirm the MAC Address

          208
          • - How to Confirm the MAC Address

            208
          • The MAC address (Ethernet address) of the Network Interface Board is required in order to use ARP...

            208
          • The MAC address can be seen on the printer configuration page.

            208
          • For additional information on printing a configuration page, refer to the Operation Instructions ...

            208
            • For additional information on printing a configuration page, refer to the Operation Instructions ...

              208
    • Remote Maintenance by Telnet (mshell)

      209
      • Remote Maintenance by Telnet (mshell)

        209
      • You can view the printer status and configure the network interface board using telnet.

        209
        • You can view the printer status and configure the network interface board using telnet.

          209
      • You should specify a password so that only the network administrator, or a person having network ...

        209
        • You should specify a password so that only the network administrator, or a person having network ...

          209
          • You should specify a password so that only the network administrator, or a person having network ...

            209
      • Operation Flow

        209
        • Operation Flow

          209
        • The following is a sample procedure in using Telnet.

          209
          • The following is a sample procedure in using Telnet.

            209
          • Only one person at a time can be logged on to do remote maintenance.

            209
            • Only one person at a time can be logged on to do remote maintenance.

              209
          • A Using the IP address or host name of the printer start telnet.

            209
            • A Using the IP address or host name of the printer start telnet.

              209
              • A Using the IP address or host name of the printer start telnet.

                209
              • % telnet

                209
                • % telnet

                  209
              • In order to use the host name instead of the IP address, you must write it to the /etc/hosts file.

                209
                • In order to use the host name instead of the IP address, you must write it to the /etc/hosts file.

                  209
            • B Input password.

              209
              • B Input password.

                209
              • The factory default is “password”.

                209
                • The factory default is “password”.

                  209
            • C Input a command.

              209
              • C Input a command.

                209
              • For information on telnet commands, refer to

                209
                • For information on telnet commands, refer to

                  209
            • D Finish telnet.

              209
              • D Finish telnet.

                209
              • msh> logout

                209
                • msh> logout

                  209
              • When the configuration is revised, a confirmation message requests whether or not the changes sho...

                209
            • E Input “yes” to save the changes, and press

              209
              • E Input “yes” to save the changes, and press

                209
              • If you do not want to save the changes, input “no”and press

                209
              • If the “Can not write NVRAM information” message appears, the changes are not saved. Repeat the s...

                209
                • If the “Can not write NVRAM information” message appears, the changes are not saved. Repeat the s...

                  209
                • The Network Interface Board is reset automatically when the settings are changed.

                  210
                • When the Network Interface Board is reset, the active print job which has already been sent tot t...

                  210
      • Command List

        210
        • Command List

          210
        • This is a list of commands that can be done via remote maintenance.

          210
          • This is a list of commands that can be done via remote maintenance.

            210
          • Input “help”, to see a list of commands that can be used.

            210
            • Input “help”, to see a list of commands that can be used.

              210
            • Input “help command_name”, to display information about the syntax of that command.

              210
        • TCP/IP Address

          210
          • TCP/IP Address

            210
          • Use the ipconfig command to configure TCP/IP (IP address, subnet mask, broadcast address, default...

            210
            • Use the ipconfig command to configure TCP/IP (IP address, subnet mask, broadcast address, default...

              210
            • Reference

              210
              • Reference

                210
                • Reference

                  210
                • msh> ifconfig

                  210
                  • msh> ifconfig

                    210
                    • msh> ifconfig

                      210
              • Configuration

                210
                • Configuration

                  210
                • msh> ifconfig le0

                  210
                  • msh> ifconfig le0

                    210
                    • msh> ifconfig le0

                      210
            • <TABLE>

              210
              • <TABLE>

                210
                • <TABLE HEADING>

                  210
                  • <TABLE ROW>

                    210
                    • Parameter

                      210
                    • Configuration Item

                      210
                • <TABLE BODY>

                  210
                  • <TABLE ROW>

                    210
                    • (no parameter)

                      210
                    • IP address

                      210
                  • <TABLE ROW>

                    210
                    • netmask

                      210
                    • subnet mask

                      210
                  • <TABLE ROW>

                    210
                    • gateway

                      210
                    • default gateway address

                      210
            • The following is an example for configuring an IP address of 192.168.15.16.

              210
            • msh> ipconfig le0 192.168.15.16

              210
              • msh> ipconfig le0 192.168.15.16

                210
            • The following is an example for configuring a subnet mask of 255.255.255.0.

              210
            • msh> ipconfig le0 netmask 255.255.255.0

              210
              • msh> ipconfig le0 netmask 255.255.255.0

                210
            • This affects the configuration of the Network Board of the IP address that is used.

              210
              • This affects the configuration of the Network Board of the IP address that is used.

                210
              • To input an address using Hex (??), add “0x” to the first command.

                210
            • - Address

              211
              • - Address

                211
              • Subnet Mask

                211
                • Subnet Mask

                  211
                  • Subnet Mask

                    211
                  • A number used to mathematically “mask” or hide the IP address on the network by eliminating those...

                    211
                    • A number used to mathematically “mask” or hide the IP address on the network by eliminating those...

                      211
                • Default Gateway Address

                  211
                  • Default Gateway Address

                    211
                  • A gateway is a connection or interchange point that connects two networks. A gateway address is f...

                    211
                    • A gateway is a connection or interchange point that connects two networks. A gateway address is f...

                      211
              • To get the above addresses, contact your network administrator.

                211
                • To get the above addresses, contact your network administrator.

                  211
        • Access Control

          211
          • Access Control

            211
          • Use the access command to view and configure access control.

            211
            • Use the access command to view and configure access control.

              211
            • Reference

              211
              • Reference

                211
                • Reference

                  211
                • msh> access

                  211
                  • msh> access

                    211
                    • msh> access

                      211
              • Configuration

                211
                • Configuration

                  211
                • msh> access

                  211
                  • msh> access

                    211
                    • msh> access

                      211
            • <TABLE>

              211
              • <TABLE>

                211
                • <TABLE HEADING>

                  211
                  • <TABLE ROW>

                    211
                    • Parameter

                      211
                    • Configuration Method

                      211
                • <TABLE BODY>

                  211
                  • <TABLE ROW>

                    211
                    • control

                      211
                    • Access Control Address

                      211
                  • <TABLE ROW>

                    211
                    • mask

                      211
                    • Access Control Mask

                      211
            • The Access Control Address and the Access Control Mask are used to limit access to the computer u...

              211
              • The Access Control Address and the Access Control Mask are used to limit access to the computer u...

                211
              • When the Access Control Address matches masked result of the IP address computer attempting to pr...

                211
              • For example, if you assign 192.168.15.16 as the Access Control Address to the Network Interface B...

                211
        • Network Boot

          212
          • Network Boot

            212
          • Use the set command to configure a network boot.

            212
            • Use the set command to configure a network boot.

              212
            • msh> set

              212
              • msh> set

                212
            • “On” means active and “Off” means inactive.

              212
            • <TABLE>

              212
              • <TABLE>

                212
                • <TABLE HEADING>

                  212
                  • <TABLE ROW>

                    212
                    • Parameter

                      212
                    • Configuration Method

                      212
                • <TABLE BODY>

                  212
                  • <TABLE ROW>

                    212
                    • ping

                      212
                    • ARP+PING

                      212
                  • <TABLE ROW>

                    212
                    • tftp

                      212
                    • RARP+TFTP

                      212
                  • <TABLE ROW>

                    212
                    • bootp

                      212
                    • BOOTP

                      212
                  • <TABLE ROW>

                    212
                    • dhcp

                      212
                    • DHCP

                      212
            • When you use RARP+TFTP, BOOTP, DHCP, the server also needs to be configured.

              212
              • When you use RARP+TFTP, BOOTP, DHCP, the server also needs to be configured.

                212
              • DHCP takes precedence over all other settings.

                212
        • Protocol

          212
          • Protocol

            212
          • Use the set command to allow/prevent remote access for each protocol.

            212
            • Use the set command to allow/prevent remote access for each protocol.

              212
            • msh> set

              212
              • msh> set

                212
            • <TABLE>

              212
              • <TABLE>

                212
                • <TABLE HEADING>

                  212
                  • <TABLE ROW>

                    212
                    • Protocol

                      212
                • <TABLE BODY>

                  212
                  • <TABLE ROW>

                    212
                    • appletalk

                      212
                      • appletalk

                        212
                      • tcpip

                        212
                      • netware

                        212
                      • netbeui

                        212
                      • lpr

                        212
                      • ftp

                        212
                      • rsh

                        212
                      • diprint

                        212
                      • web

                        212
                    • “Up” means active and "Down” means inactive.

                      212
            • If you prohibit remote access using TCP/IP and then logout, you cannot use remote access. If this...

              213
              • If you prohibit remote access using TCP/IP and then logout, you cannot use remote access. If this...

                213
              • When you prevent access via TCP/IP, you are also prevented from using lpr, ftp and rsh.

                213
        • Status of Printer

          213
          • Status of Printer

            213
          • The following commands can be used to get information about the current status of the printer.

            213
            • The following commands can be used to get information about the current status of the printer.

              213
            • msh>

              213
              • msh>

                213
            • <TABLE>

              213
              • <TABLE>

                213
                • <TABLE HEADING>

                  213
                  • <TABLE ROW>

                    213
                    • Command

                      213
                    • Information that is displayed

                      213
                • <TABLE BODY>

                  213
                  • <TABLE ROW>

                    213
                    • status

                      213
                    • Status of printer.

                      213
                      • Status of printer.

                        213
                      • Information about the print job.

                        213
                  • <TABLE ROW>

                    213
                    • info

                      213
                    • Information about the paper tray, output tray, emulation and program of printer.

                      213
                  • <TABLE ROW>

                    213
                    • prnlog [ID]

                      213
                    • Lists the last 10 print jobs.

                      213
                  • <TABLE ROW>

                    213
                    • netstat

                      213
                    • Information about the network interface board.

                      213
            • More information on the print job is displayed when the ID number is added after the prnlog command.

              213
              • More information on the print job is displayed when the ID number is added after the prnlog command.

                213
            • For more information on the meaning of the data returned with these commands, refer to

              213
              • For more information on the meaning of the data returned with these commands, refer to

                213
        • Information about the Network Interface Board Configuration Settings

          213
          • Information about the Network Interface Board Configuration Settings

            213
          • Use the show command to display the Network Interface Board configuration settings.

            213
            • Use the show command to display the Network Interface Board configuration settings.

              213
            • msh> show [-p]

              213
              • msh> show [-p]

                213
            • Add “-p” to the show command to have the information displayed one screen at a time.

              213
              • Add “-p” to the show command to have the information displayed one screen at a time.

                213
            • For more information on the meaning of the data returned with this command, refer tofi

              213
              • For more information on the meaning of the data returned with this command, refer tofi

                213
        • System Log Information

          214
          • System Log Information

            214
          • Use the syslog command to display information stored in the printer's system log.

            214
            • Use the syslog command to display information stored in the printer's system log.

              214
            • msh> syslog

              214
              • msh> syslog

                214
            • For more information on the displayed information, refer tofi

              214
              • For more information on the displayed information, refer tofi

                214
        • SNMP

          214
          • SNMP

            214
          • Use the snmp command to display and edit SNMP configuration settings such as the community name.

            214
            • Use the snmp command to display and edit SNMP configuration settings such as the community name.

              214
          • You can configure from No. 1 to 10 SNMP settings.

            214
            • You can configure from No. 1 to 10 SNMP settings.

              214
              • You can configure from No. 1 to 10 SNMP settings.

                214
              • The factory default settings for No. 1 and 2 are as follows.

                214
              • <TABLE>

                214
                • <TABLE>

                  214
                  • <TABLE BODY>

                    214
                    • <TABLE ROW>

                      214
                      • Number

                        214
                    • <TABLE ROW>

                      214
                      • community name

                        214
                      • public

                        214
                      • ricoh

                        214
                    • <TABLE ROW>

                      214
                      • IP address

                        214
                      • 0.0.0.0

                        214
                      • 0.0.0.0

                        214
                    • <TABLE ROW>

                      214
                      • access type

                        214
                      • read-only

                        214
                        • read-only

                          214
                        • trap off

                          214
                      • read-write

                        214
                        • read-write

                          214
                        • trap off

                          214
            • Display

              214
              • Display

                214
                • Display

                  214
                • Shows the SNMP information and available protocols.

                  214
                  • Shows the SNMP information and available protocols.

                    214
                  • msh> snmp ? msh> snmp [-p] [

                    214
                  • If -p option is added, you can view the displays one by one.

                    214
                    • If -p option is added, you can view the displays one by one.

                      214
                    • If the registered number is not added, you can view the status of all the registered numbers.

                      214
              • Community name configuration

                214
                • Community name configuration

                  214
                • You can set the community name of the Network Interface Board.

                  214
                  • You can set the community name of the Network Interface Board.

                    214
                  • msh> snmp

                    214
                  • The commmunity name must consist of less than 15 characters.

                    214
                    • The commmunity name must consist of less than 15 characters.

                      214
              • Access type configuration

                214
                • Access type configuration

                  214
                • You can select access type among those listed below.

                  214
                  • You can select access type among those listed below.

                    214
                  • msh> snmp

                    214
                    • msh> snmp

                      214
                  • <TABLE>

                    215
                    • <TABLE>

                      215
                      • <TABLE HEADING>

                        215
                        • <TABLE ROW>

                          215
                          • Access Type

                            215
                          • Type of access which is permitted

                            215
                      • <TABLE BODY>

                        215
                        • <TABLE ROW>

                          215
                          • read

                            215
                          • Read only access is permitted.

                            215
                        • <TABLE ROW>

                          215
                          • write

                            215
                          • Read and write access is permitted.

                            215
                        • <TABLE ROW>

                          215
                          • trap

                            215
                          • User is notified of trap messages.

                            215
                        • <TABLE ROW>

                          215
                          • no

                            215
                          • All access is denied.

                            215
              • Protocol configuration

                215
                • Protocol configuration

                  215
                • You should use the following command to set the protocols to active or inactive. If you set a pro...

                  215
                  • You should use the following command to set the protocols to active or inactive. If you set a pro...

                    215
                  • msh> snmp {ip | ipx} {on | off}

                    215
                  • • “On” means active and “Off” means inactive

                    215
                    • • “On” means active and “Off” means inactive

                      215
                      • • “On” means active and “Off” means inactive

                        215
                  • If you want to change the protocol settings for each registered number,use the following command....

                    215
                  • msh> snmp

                    215
              • Access Configuration

                215
                • Access Configuration

                  215
                • You can configure an address of a host depending on the protocols used.

                  215
                  • You can configure an address of a host depending on the protocols used.

                    215
                  • The Network Interface Board accepts requests only from hosts having addresses with access types o...

                    215
                  • The following example shows how set the protocol for an address.

                    215
                  • msh> snmp

                    215
                    • msh> snmp

                      215
                  • When using the TCP/IP protocol, input ip followed by a space and then the IP address.

                    215
                    • When using the TCP/IP protocol, input ip followed by a space and then the IP address.

                      215
                    • When using the IPX/SPX protocol, input ipx followed by a space and then the IPX address followed ...

                      215
                  • The following is an example of how to configure registration number 3 with the IP address 192.168...

                    215
                  • msh> snmp 3 ip 192.168.15.16

                    215
                    • msh> snmp 3 ip 192.168.15.16

                      215
                  • The following is an example of how to configure registration number 3 with the IPX address 7390 A...

                    215
                  • msh> snmp 3 ipx 7390A448.000074625C65

                    215
                    • msh> snmp 3 ipx 7390A448.000074625C65

                      215
        • Changing the Password

          215
          • Changing the Password

            215
          • Use the passwd command to change the remote maintenance password.

            215
            • Use the passwd command to change the remote maintenance password.

              215
            • Be sure not to forget or lose the password.

              215
              • Be sure not to forget or lose the password.

                215
            • The default factory password is “password”.

              216
              • The default factory password is “password”.

                216
            • A Input “passwd”.

              216
              • A Input “passwd”.

                216
                • A Input “passwd”.

                  216
                • msh> passwd

                  216
                  • msh> passwd

                    216
              • B Input the current password.

                216
                • B Input the current password.

                  216
                • Old password:

                  216
                  • Old password:

                    216
              • C Input the new password.

                216
                • C Input the new password.

                  216
                • New password:

                  216
                  • New password:

                    216
                • The password must consist of 3 to 8 alphanumeric characters and symbols. Upper and lower case cha...

                  216
                  • The password must consist of 3 to 8 alphanumeric characters and symbols. Upper and lower case cha...

                    216
                  • The password is the same as that used in the configuration of the Network Information Board using...

                    216
              • D Input the new password once again.

                216
                • D Input the new password once again.

                  216
                • Retype new password:

                  216
                  • Retype new password:

                    216
    • SNMP

      217
      • SNMP

        217
      • The Network Interface Board functions as a SNMP (Simple Network Management Protocol) agent using ...

        217
        • The Network Interface Board functions as a SNMP (Simple Network Management Protocol) agent using ...

          217
      • The factory default community names are “public” and “ricoh”. You can get MIB information using t...

        217
        • The factory default community names are “public” and “ricoh”. You can get MIB information using t...

          217
        • For more information about configuring the community name, refer tofi

          217
          • For more information about configuring the community name, refer tofi

            217
        • The kinds of the supported MIB differ depending on your printer.

          217
          • The kinds of the supported MIB differ depending on your printer.

            217
        • Supported MIBs

          217
          • Supported MIBs

            217
            • Supported MIBs

              217
            • • MIB-II

              217
              • • MIB-II

                217
                • • MIB-II

                  217
                  • • MIB-II

                    217
              • • PrinterMIB

                217
                • • PrinterMIB

                  217
                  • • PrinterMIB

                    217
              • • HostResourceMIB

                217
                • • HostResourceMIB

                  217
                  • • HostResourceMIB

                    217
              • • RicohPrivateMIB (ERICOH Original)

                217
                • • RicohPrivateMIB (ERICOH Original)

                  217
                  • • RicohPrivateMIB (ERICOH Original)

                    217
    • Understanding the Displayed Information

      218
      • Understanding the Displayed Information

        218
      • This section describes how to read the displayed information about the status of the Network Inte...

        218
        • This section describes how to read the displayed information about the status of the Network Inte...

          218
      • Print Job Information

        218
        • Print Job Information

          218
          • The status of the print job can be viewed using the following commands.

            218
          • <TABLE>

            218
            • <TABLE>

              218
              • <TABLE HEADING>

                218
                • <TABLE ROW>

                  218
                  • Item Name

                    218
                  • Meaning

                    218
              • <TABLE BODY>

                218
                • <TABLE ROW>

                  218
                  • ID

                    218
                  • Number of the print request.

                    218
                • <TABLE ROW>

                  218
                  • Source

                    218
                  • The name of the host requesting the print job.

                    218
                • <TABLE ROW>

                  218
                  • Process

                    218
                  • The type of print command.

                    218
                • <TABLE ROW>

                  218
                  • Status

                    218
                  • Status of print job.

                    218
                    • Status of print job.

                      218
                    • • Active

                      218
                      • • Active

                        218
                        • • Active

                          218
                        • Printing or being prepared for printing.

                          218
                      • • Waiting

                        218
                        • • Waiting

                          218
                        • Waiting to be transferred to the printer.

                          218
                • <TABLE ROW>

                  218
                  • Time

                    218
                  • The time when the print request was received.

                    218
      • Print Log Information

        218
        • Print Log Information

          218
        • This is record of jobs that have been printed up to now. The most recent ten records are displayed.

          218
          • This is record of jobs that have been printed up to now. The most recent ten records are displayed.

            218
          • This record can be displayed with the following commands.

            218
          • • UNIX : Use the prnlog parameter with rsh, rcp, ftp

            218
            • • UNIX : Use the prnlog parameter with rsh, rcp, ftp

              218
              • • UNIX : Use the prnlog parameter with rsh, rcp, ftp

                218
            • • mshell : Use the prnlog command

              218
              • • mshell : Use the prnlog command

                218
          • <TABLE>

            218
            • <TABLE>

              218
              • <TABLE HEADING>

                218
                • <TABLE ROW>

                  218
                  • Item Name

                    218
                  • Meaning

                    218
              • <TABLE BODY>

                218
                • <TABLE ROW>

                  218
                  • ID

                    218
                  • Printing request number.

                    218
                • <TABLE ROW>

                  218
                  • Source

                    218
                  • The user name, workstation name or address of the host that sent the print job.

                    218
                • <TABLE ROW>

                  218
                  • Process

                    218
                  • The type of print command used.

                    218
                • <TABLE ROW>

                  218
                  • Bytes

                    218
                  • The size of the file in bytes.

                    218
                • <TABLE ROW>

                  219
                  • Result

                    219
                  • Communication result.

                    219
                    • Communication result.

                      219
                    • • OK

                      219
                      • • OK

                        219
                        • • OK

                          219
                        • Indicates that the print job was completed correctly.

                          219
                      • • NG

                        219
                        • • NG

                          219
                        • Indicates that the print job was not completed normally.

                          219
                      • • Canceled

                        219
                        • • Canceled

                          219
                        • rcp, rsh or lpr print commands were stopped. A problem occurred with the printing application. Th...

                          219
                • <TABLE ROW>

                  219
                  • Time

                    219
                  • The time when the print request was received.

                    219
                • <TABLE ROW>

                  219
                  • User

                    219
                  • The user name, workstation name or address of the host that sent the print job.

                    219
                • <TABLE ROW>

                  219
                  • Address

                    219
                  • IP address.

                    219
                • <TABLE ROW>

                  219
                  • Process

                    219
                  • The type of print command used.

                    219
                • <TABLE ROW>

                  219
                  • Print Start Time

                    219
                  • The time the print job was started.

                    219
                • <TABLE ROW>

                  219
                  • Print End Time

                    219
                  • The time the print job was completed.

                    219
                • <TABLE ROW>

                  219
                  • Open Count

                    219
                • <TABLE ROW>

                  219
                  • Eof Count

                    219
                  • Reception number of file unit.

                    219
                • <TABLE ROW>

                  219
                  • Data Size

                    219
                  • Number of bytes of received data.

                    219
      • Network Statistical Information

        219
        • Network Statistical Information

          219
        • This section is about the information provided about the Network Interface Board.

          219
          • This section is about the information provided about the Network Interface Board.

            219
          • Detailed information about the words used to describe the status of the Network Interface Board a...

            219
          • <TABLE>

            219
            • <TABLE>

              219
              • <TABLE HEADING>

                219
                • <TABLE ROW>

                  219
                  • Item Name

                    219
                  • Meaning

                    219
              • <TABLE BODY>

                219
                • <TABLE ROW>

                  219
                  • System elapsed time

                    219
                  • The time that passed since the network interface board started.

                    219
                • <TABLE ROW>

                  219
                  • Total printing time

                    219
                  • A total time spent in processing printing the data.

                    219
                • <TABLE ROW>

                  219
                  • Total open count

                    219
                  • A total open (printing process) count that application required.

                    219
                • <TABLE ROW>

                  219
                  • Current connection count

                    219
                  • Number of job connecting with a network interface board currently.

                    219
                • <TABLE ROW>

                  219
                  • Total connection count

                    219
                  • The total number of print jobs sent to the network interface board.

                    219
                • <TABLE ROW>

                  220
                  • Print error count

                    220
                  • Number of times the printing process sent an error message.

                    220
                • <TABLE ROW>

                  220
                  • Access error count

                    220
                  • Number of times the connection was refused because of the value of of the access control.

                    220
                • <TABLE ROW>

                  220
                  • Print request full count

                    220
                  • Number of times a connection was refused because the number of print requests exceeded the number...

                    220
      • Configuring the Network Interface Board

        220
        • Configuring the Network Interface Board

          220
          • Network Information Board settings can be displayed and confirmed using the commands below..

            220
          • <TABLE>

            220
            • <TABLE>

              220
              • <TABLE HEADING>

                220
                • <TABLE ROW>

                  220
                  • Item Name

                    220
                  • Meaning

                    220
              • <TABLE BODY>

                220
                • <TABLE ROW>

                  220
                  • Common

                    220
                    • Common

                      220
                    • Mode

                      220
                    • Protocol Up/Down

                      220
                    • AppleTalk

                      220
                    • TCP/IP

                      220
                    • NetWare

                      220
                    • NetBEUI

                      220
                    • NVRAM version

                      220
                    • Device name

                      220
                    • Comment

                      220
                    • Location

                      220
                    • Contact

                      220
                    • Soft switch

                      220
                  • Up means active, Down means inactive.

                    220
                    • Up means active, Down means inactive.

                      220
                    • Internal version number.

                      220
                • <TABLE ROW>

                  220
                  • AppleTalk

                    220
                    • AppleTalk

                      220
                    • Mode

                      220
                    • Net

                      220
                    • Object

                      220
                    • Type

                      220
                    • Zone

                      220
                  • AppleTalk protocol in selection.

                    220
                    • AppleTalk protocol in selection.

                      220
                    • Network number.

                      220
                    • Macintosh printer name.

                      220
                    • The type of printer.

                      220
                    • Name of the zone that the printer belongs to.

                      220
                • <TABLE ROW>

                  221
                  • TCP/IP

                    221
                    • TCP/IP

                      221
                    • Mode

                      221
                    • ftp

                      221
                    • lpr

                      221
                    • rsh

                      221
                    • diprint

                      221
                    • web

                      221
                    • telnet

                      221
                    • download

                      221
                    • EncapType

                      221
                    • Network boot

                      221
                    • Filter

                      221
                    • Max DSTs

                      221
                    • Address

                      221
                    • Netmask

                      221
                    • Broadcast

                      221
                    • Gateway

                      221
                    • AccessCtrl

                      221
                    • AccessMask

                      221
                    • Time server

                      221
                    • Home page URL

                      221
                    • Home page link name

                      221
                    • Help page URL

                      221
                    • SNMP protocol

                      221
                  • Up means active, Down means inactive.

                    221
                    • Up means active, Down means inactive.

                      221
                    • Frame type.

                      221
                    • Network boot.

                      221
                    • Internal parameter.

                      221
                    • IP address.

                      221
                    • Subnet mask.

                      221
                    • Broadcast address.

                      221
                    • Default gateway address.

                      221
                    • Access control address.

                      221
                    • Access control mask.

                      221
                    • URL of homepage.

                      221
                    • URL name of homepage.

                      221
                    • Protocol used with SNMP.

                      221
                • <TABLE ROW>

                  222
                  • NetWare

                    222
                    • NetWare

                      222
                    • Mode

                      222
                    • EncapType

                      222
                    • RPRINTER number

                      222
                    • RPRINTER name

                      222
                    • Print server name

                      222
                    • File server name

                      222
                    • Context name

                      222
                    • Switch

                      222
                    • Mode

                      222
                    • NDS/Bindery

                      222
                    • Packet negotiation

                      222
                    • Print job timeout

                      222
                  • (this value is fixed)

                    222
                    • (this value is fixed)

                      222
                    • Frame type.

                      222
                    • Remote printer number.

                      222
                    • Remote printer name.

                      222
                    • Print server name.

                      222
                    • Name of the connect file server.

                      222
                    • Context of print server.

                      222
                    • Active mode.

                      222
                    • (this value is fixed)

                      222
                    • Time of the job timeout.

                      222
                • <TABLE ROW>

                  222
                  • NetBEUI

                    222
                    • NetBEUI

                      222
                    • Mode

                      222
                    • Switch

                      222
                    • Mode

                      222
                    • Direct print

                      222
                    • Notification

                      222
                    • Workgroup name

                      222
                    • Computer name

                      222
                    • Comment

                      222
                    • Share name[1]

                      222
                  • NetBEUI is not supported.

                    222
                    • NetBEUI is not supported.

                      222
                • <TABLE ROW>

                  222
                  • Shell mode

                    222
                  • Mode of remote maintenance tool.

                    222
    • Message List

      223
      • Message List

        223
      • This is a list of messages recorded to the the printer's sytem log. The system log can be viewed ...

        223
        • This is a list of messages recorded to the the printer's sytem log. The system log can be viewed ...

          223
      • System Log Information

        223
        • System Log Information

          223
          • You can use the following methods to view the system log.

            223
        • Message When the Network Interface Board Starts or Restarts.

          223
          • Message When the Network Interface Board Starts or Restarts.

            223
          • <TABLE>

            223
            • <TABLE>

              223
              • <TABLE>

                223
                • <TABLE BODY>

                  223
                  • <TABLE ROW>

                    223
                    • RICOH NIC Ver.x.x.x

                      223
                    • Version number of the Network Interface Board.

                      223
                  • <TABLE ROW>

                    223
                    • PRINTER SYSTEM “system name” Ver.x.x.x

                      223
                    • System name and version of the printer.

                      223
                  • <TABLE ROW>

                    223
                    • Attach FileServer=“file server name”

                      223
                    • Your Printer is attached to “file server name” as the nearest server.

                      223
                  • <TABLE ROW>

                    223
                    • Current Interface Speed:xxxMbps

                      223
                    • Shows the speed of the network (10 Mbps or 100 Mbps).

                      223
                  • <TABLE ROW>

                    223
                    • Current IPX address

                      223
                    • You can print from a client on the Windows network via the print server.

                      223
                  • <TABLE ROW>

                    223
                    • Frametype=“frame type name”

                      223
                    • The "frame type name" is configured to be used on NetWare.

                      223
                  • <TABLE ROW>

                    223
                    • NetBEUI Computer Name=“computer name”

                      223
                    • The NetBEUI Computer Name is defined as "computer name".

                      223
                  • <TABLE ROW>

                    223
                    • Start httpd

                      223
                  • <TABLE ROW>

                    223
                    • Start npmpd for IPX

                      223
                    • The npmpd for IPX protocol has been started.

                      223
                  • <TABLE ROW>

                    223
                    • Start npmpd for TCP/IP

                      223
                    • The npmpd for TCP/IP protocol has been started.

                      223
                  • <TABLE ROW>

                    223
                    • Start smbd direct print mode(NetBEUI)

                      223
                    • You can print from a client on the Windows network via the print server.

                      223
                  • <TABLE ROW>

                    223
                    • Start snmpd Ver.2.0

                      223
                    • The SNMP agent of the displayed version has been started.

                      223
                  • <TABLE ROW>

                    223
                    • Vendor= , Country= , Lang=

                      223
                    • .

                      223
        • NetWare (When the Network Interface Board is Started)

          224
          • NetWare (When the Network Interface Board is Started)

            224
          • When working as a print server

            224
            • When working as a print server

              224
              • When working as a print server

                224
                • When working as a print server

                  224
                • <TABLE>

                  224
                  • <TABLE>

                    224
                    • <TABLE>

                      224
                      • <TABLE>

                        224
                        • <TABLE BODY>

                          224
                          • <TABLE ROW>

                            224
                            • Access to NetWare server “file server name” denied. Either there is no account for this print ser...

                              224
                            • Cannot log in to the file server. Confirm that the print server is registered on the file server....

                              224
                          • <TABLE ROW>

                            224
                            • Attach to print queue “print queue name”

                              224
                            • Attached to the print queue.

                              224
                          • <TABLE ROW>

                            224
                            • File server is empty

                              224
                            • The file server is not registered. Register your file server using the utility.

                              224
                          • <TABLE ROW>

                            224
                            • Login to fileserver “file server name” (“NDS|BINDERY”) -year/month/day hour:minute:second

                              224
                            • Logged in to the file server with NDS or BINDERY mode. When the file server was logged in is disp...

                              224
                          • <TABLE ROW>

                            224
                            • Open log file “file name”

                              224
                            • The specified log file is opened.

                              224
                          • <TABLE ROW>

                            224
                            • Printer “printer name” has no queue

                              224
                            • The print queue is not assigned to the printer. Using NetWare Admin, assign the print queue to th...

                              224
                          • <TABLE ROW>

                            224
                            • Print queue “print queue name” cannot be serviced by printer 0, “print server name”

                              224
                            • Print services are not available for the print queue. Confirm that the volume of the print queue ...

                              224
                          • <TABLE ROW>

                            224
                            • The print server received error “error number” during attempt to log in to the network.Access to ...

                              224
                            • Cannot log in to the file server. The print server is not registered or the password is specified...

                              224
              • When working as a remote printer

                224
                • When working as a remote printer

                  224
                • <TABLE>

                  224
                  • <TABLE>

                    224
                    • <TABLE>

                      224
                      • <TABLE>

                        224
                        • <TABLE BODY>

                          224
                          • <TABLE ROW>

                            224
                            • Cannot create service connection

                              224
                            • Cannot establish a connection with the file server. It may exceed the user limit of the file server.

                              224
                          • <TABLE ROW>

                            224
                            • Cannot find rprinter (“print server name”/”printer number”)

                              224
                            • There is not the printer of the displayed number on the displayed print server. Confirm the numbe...

                              224
                          • <TABLE ROW>

                            224
                            • Establish a connection with the print server, “print server name”

                              224
                            • A connection with the print server has been established.

                              224
                          • <TABLE ROW>

                            225
                            • No local target for “print server name”

                              225
                            • Cannot get routing information on the file server. If a different frame type is configured from t...

                              225
                          • <TABLE ROW>

                            225
                            • Required file server (“file server name”) not found

                              225
                            • Cannot find the required file server.

                              225
                          • <TABLE ROW>

                            225
                            • Required print server (“print server name”) not found

                              225
                            • Cannot find the print server. Confirm the name of the print server.

                              225
                          • <TABLE ROW>

                            225
                            • Unable to attach to print server (“print server name”)

                              225
                            • Cannot attach to the print server. The print server refuses a connection for some reason. Confirm...

                              225
        • TCP/IP

          225
          • TCP/IP

            225
          • When the address is configured

            225
            • When the address is configured

              225
              • When the address is configured

                225
                • When the address is configured

                  225
                • <TABLE>

                  225
                  • <TABLE>

                    225
                    • <TABLE>

                      225
                      • <TABLE>

                        225
                        • <TABLE BODY>

                          225
                          • <TABLE ROW>

                            225
                            • Invalid gateway address

                              225
                            • The Gateway address is not correct for the specified IP address.

                              225
              • When using lpr

                225
                • When using lpr

                  225
                • <TABLE>

                  225
                  • <TABLE>

                    225
                    • <TABLE>

                      225
                      • <TABLE>

                        225
                        • <TABLE BODY>

                          225
                          • <TABLE ROW>

                            225
                            • filter data error

                              225
                            • Some data cannot be handled by the filter option. Confirm the file code and the settings of the f...

                              225
                          • <TABLE ROW>

                            225
                            • lost connection

                              225
                            • The connection was cut by a counterpart. Check the printer to which you requested to print.

                              225
                          • <TABLE ROW>

                            225
                            • print requests full

                              225
                            • Cannot accept the print request.(max. 5 sessions) Confirm the status of the printer with lpq, rsh...

                              225
                          • <TABLE ROW>

                            225
                            • printer permission denied

                              225
                            • Cannot get permission to use the printer. Confirm the access rights with the access control addre...

                              225
                          • <TABLE ROW>

                            225
                            • printer refuse

                              225
                            • Something is wrong with your printer. Confirm the status of the printer.

                              225
                    • At the beginning of the message, the IP address of the client is displayed within parentheses.

                      225
              • When using rsh, rcp, ftp

                226
                • When using rsh, rcp, ftp

                  226
                • <TABLE>

                  226
                  • <TABLE>

                    226
                    • <TABLE>

                      226
                      • <TABLE>

                        226
                        • <TABLE BODY>

                          226
                          • <TABLE ROW>

                            226
                            • Can't build data connection: “message”

                              226
                            • Cannot establish a connection for data transfer due to the displayed error. Check the ftp of the ...

                              226
                          • <TABLE ROW>

                            226
                            • cmd_name:Command not supported

                              226
                            • The remote shell command using cmd- namd is not supported. You should use only the print, stat, s...

                              226
                          • <TABLE ROW>

                            226
                            • command line too long

                              226
                            • The command line is too long.

                              226
                          • <TABLE ROW>

                            226
                            • file_name:No such file or directory

                              226
                            • You must use a file name with the stat, status, syslog, info, prnlog, and install commands.

                              226
                          • <TABLE ROW>

                            226
                            • filter data error

                              226
                            • Some of the data cannot be handled by the filter option. Confirm the file code and the settings o...

                              226
                          • <TABLE ROW>

                            226
                            • get log busy

                              226
                            • Other machine is getting the log information. You should get it afterwards.

                              226
                          • <TABLE ROW>

                            226
                            • lost connection

                              226
                            • The connection was cut by a counterpart. Check the ftp of the workstation that requested the prin...

                              226
                          • <TABLE ROW>

                            226
                            • no more ftp execute

                              226
                            • More than 3 users cannot log in using ftp at a time. Since there are 3 other users that have alre...

                              226
                          • <TABLE ROW>

                            226
                            • print requests full

                              226
                            • Cannot accept the print request.(max. 5 sessions) Confirm the status of the printer with lpq, rsh...

                              226
                          • <TABLE ROW>

                            226
                            • printer busy

                              226
                            • Cannot get the printer information. Another user may be accessing it. Wait a few minutes before t...

                              226
                          • <TABLE ROW>

                            226
                            • printer permission denied

                              226
                            • Cannot get a permission to use the printer. Confirm the access right with the access control addr...

                              226
                          • <TABLE ROW>

                            227
                            • printer refuse

                              227
                            • Something is wrong with your printer. Confirm the status of the printer.

                              227
                    • At the beginning of the message, the IP address is displayed in parentheses.

                      227
              • When using SNMP

                227
                • When using SNMP

                  227
                • <TABLE>

                  227
                  • <TABLE>

                    227
                    • <TABLE>

                      227
                      • <TABLE>

                        227
                        • <TABLE BODY>

                          227
                          • <TABLE ROW>

                            227
                            • Exit snmpdSNMP

                              227
                            • The agent is complete. Reset the printer or turn the printer off and on.

                              227
                          • <TABLE ROW>

                            227
                            • recvfrom:packet discarded,length(Reception packet length)> (Packet size),from addr <Address of pa...

                              227
                            • The received packet was ignored since the length of the packet exceeds the limit. Confirm whether...

                              227
                          • <TABLE ROW>

                            227
                            • session <Community name appointed> not defined

                              227
                            • The community name of the received packet is not defined. Confirm that the community name of the ...

                              227
                          • <TABLE ROW>

                            227
                            • snmpin:Bad use of session <community Name> from <IP Address>

                              227
                            • The community name of the received packet is not the same as that of the administration station. ...

                              227
                          • <TABLE ROW>

                            227
                            • snmpin:error in snmpdecipher,code (<Error No.>)

                              227
                            • The error occurred on the received packet. Check if the number of the objects sent from the admin...

                              227
                          • <TABLE ROW>

                            227
                            • snmpin:error in snmpservsend,code (<Error No.>)

                              227
                            • Cannot send a response packet. Normally, this message is followed by the following messages.

                              227
                          • <TABLE ROW>

                            227
                            • snmpin:pkt too large,code (<Error number>)*1

                              227
                            • The response packet to the request is too big to send. Reduce the number of the objects per request.

                              227
                          • <TABLE ROW>

                            227
                            • snmpin:error in sending too large request back,code (<Error number>),giving up*2

                              227
                            • The packet notifying the error is too big to send. Reduce the number of the objects per request.

                              227
                          • <TABLE ROW>

                            227
                            • snmpin:received bad version

                              227
                            • The version of the received packet is invalid. Confirm that the version of the administration sta...

                              227
                    • Error numbers in the messages are codes for service representatives.

                      227
    • Please Be Careful

      228
      • Please Be Careful

        228
      • Please pay attention to the following when using a network interface board. When configuration is...

        228
        • Please pay attention to the following when using a network interface board. When configuration is...

          228
      • When Connect ISDN Line to a Network

        228
        • When Connect ISDN Line to a Network

          228
        • When file server of NetWare exists in the network of remote side, ISDN line continues being conne...

          228
          • When file server of NetWare exists in the network of remote side, ISDN line continues being conne...

            228
        • Correspondence Method on Network Administration

          228
          • Correspondence Method on Network Administration

            228
          • Filter the packets so that they do not pass over the ISDN line.

            228
            • Filter the packets so that they do not pass over the ISDN line.

              228
            • The MAC address of the printer doing the filtering is printed on the printer configuration page. ...

              228
              • The MAC address of the printer doing the filtering is printed on the printer configuration page. ...

                228
              • See the instructions below for information on configuring the printer if the router cannot be con...

                228
        • Correspondence Method by Configuration of Printer(When Use NetWare)

          228
          • Correspondence Method by Configuration of Printer(When Use NetWare)

            228
          • A According to setup method of this manual, appoint file server by all means.

            228
            • A According to setup method of this manual, appoint file server by all means.

              228
              • A According to setup method of this manual, appoint file server by all means.

                228
                • A According to setup method of this manual, appoint file server by all means.

                  228
              • B Match frame type with use environment of NetWare, and fix it.

                228
                • B Match frame type with use environment of NetWare, and fix it.

                  228
                • About a method to select frame type, refer to operationg instructions of the printer.

                  228
                  • About a method to select frame type, refer to operationg instructions of the printer.

                    228
        • Correspondence Method by Configuration of Printer(When do not Use NetWare)

          228
          • Correspondence Method by Configuration of Printer(When do not Use NetWare)

            228
          • A While you do not print, a Network Interface Board sends packet on the network. Disable with Net...

            228
            • A While you do not print, a Network Interface Board sends packet on the network. Disable with Net...

              228
              • A While you do not print, a Network Interface Board sends packet on the network. Disable with Net...

                228
                • A While you do not print, a Network Interface Board sends packet on the network. Disable with Net...

                  228
                • About a method to disable with protocol, refer to operationg instructions of printer.

                  228
                  • About a method to disable with protocol, refer to operationg instructions of printer.

                    228
      • When print PostScript from Windows

        229
        • When print PostScript from Windows

          229
        • When print PostScript from Windows, refer to operationg instructions attached to PostScript kit, ...

          229
          • When print PostScript from Windows, refer to operationg instructions attached to PostScript kit, ...

            229
      • When print it with NetWare

        229
        • When print it with NetWare

          229
        • Configuration of form feed

          229
          • Configuration of form feed

            229
          • Please do not configure of form feed on NetWare. You do not need to configure on NetWare in order...

            229
            • Please do not configure of form feed on NetWare. You do not need to configure on NetWare in order...

              229
            • If you want to do not do form feed, configure according to OS using it as follows.

              229
            • • In case of Windows 3.1x, avoid a check of

              229
              • • In case of Windows 3.1x, avoid a check of

                229
                • • In case of Windows 3.1x, avoid a check of

                  229
              • • In case of Windows95/98, you avoid a check of

                229
                • • In case of Windows95/98, you avoid a check of

                  229
        • Configuration of banner page

          229
          • Configuration of banner page

            229
          • Please do not configure of banner page on NetWare.

            229
            • Please do not configure of banner page on NetWare.

              229
            • If you want to do not add banner page, configure according to OS using it as follows.

              229
            • • In case of Windows 3.1x, avoid a check of

              229
              • • In case of Windows 3.1x, avoid a check of

                229
                • • In case of Windows 3.1x, avoid a check of

                  229
              • • In case of Windows95/98, you avoid a check of

                229
                • • In case of Windows95/98, you avoid a check of

                  229
        • Printing after Resetting the Printer

          229
          • Printing after Resetting the Printer

            229
          • After resetting the remote printer, it will be cut off from the print server for about 30-40 seco...

            229
            • After resetting the remote printer, it will be cut off from the print server for about 30-40 seco...

              229
            • When using the printer as a remote printer, wait about 2 minutes after resetting the printer befo...

              229
      • When to Use DHCP

        229
        • When to Use DHCP

          229
        • The following points are important when using DHCP (Dynamic Host Configuration Protocol).

          229
          • The following points are important when using DHCP (Dynamic Host Configuration Protocol).

            229
        • Supported Systems

          230
          • Supported Systems

            230
          • Windows NT Server 3.51, 4.0 can be configured as a DHCP server.

            230
            • Windows NT Server 3.51, 4.0 can be configured as a DHCP server.

              230
        • Give the printer a static address

          230
          • Give the printer a static address

            230
          • Configure the DHCP server to so that the printer has a static address.

            230
            • Configure the DHCP server to so that the printer has a static address.

              230
            • When numerical DHCP server exists, turn an equal reservation into all DHCP server. A Network Inte...

              230
              • When numerical DHCP server exists, turn an equal reservation into all DHCP server. A Network Inte...

                230
            • Follow the steps below to provide the printer with a static IP address.

              230
            • A Start DHCP manager.

              230
              • A Start DHCP manager.

                230
                • A Start DHCP manager.

                  230
              • B Select the scope that will be used, and on the

                230
                • B Select the scope that will be used, and on the

                  230
              • C Enter the IP address into

                230
                • C Enter the IP address into

                  230
              • D Enter the MAC address of the Network Interface Board into

                230
                • D Enter the MAC address of the Network Interface Board into

                  230
                • Do not use hyphens to separate the numbers.

                  230
                  • Do not use hyphens to separate the numbers.

                    230
                  • If you don't know the MAC address, it can be found on the “configuration page” printed by the pri...

                    230
              • E Input a name and comment into the

                230
                • E Input a name and comment into the

                  230
                • For additonal information about client names, please refer to

                  230
                  • For additonal information about client names, please refer to

                    230
              • F Click

                230
                • F Click

                  230
                • An IP address is reserved.

                  230
              • G Click

                230
                • G Click

                  230
        • The Others

          230
          • The Others

            230
          • • When you click

            230
            • • When you click

              230
              • • When you click

                230
                • • When you click

                  230
              • • When IP address is not assigned from DHCP server, a network interface board uses 11.22.33.44 as...

                231
                • • When IP address is not assigned from DHCP server, a network interface board uses 11.22.33.44 as...

                  231
              • • Because 11.22.33.44 are special IP address, you cannot print in this address.

                231
                • • Because 11.22.33.44 are special IP address, you cannot print in this address.

                  231
              • • When used DHCP relay agent with the environment that ISDN line was connected to a network, ISDN...

                231
                • • When used DHCP relay agent with the environment that ISDN line was connected to a network, ISDN...

                  231
    • Specification

      232
      • Specification

        232
      • <TABLE>

        232
        • <TABLE>

          232
          • <TABLE>

            232
            • <TABLE BODY>

              232
              • <TABLE ROW>

                232
                • LAN interface

                  232
                • 100BASE-TX, 10BASE-T

                  232
              • <TABLE ROW>

                232
                • Frame type

                  232
                • EthernetII, IEEE802.2, IEEE802.3, SNAP

                  232
              • <TABLE ROW>

                232
                • Protocol

                  232
                • • IPX/SPX

                  232
                  • • IPX/SPX

                    232
                    • • IPX/SPX

                      232
                      • • IPX/SPX

                        232
                      • NetWare 3.11, 3.12, 3.2, 4.1, 4.11, IntranetWare

                        232
                    • • TCP/IP

                      232
                      • • TCP/IP

                        232
                      • Windows 95

                        232
                      • Windows 98

                        232
                      • Windows NT 4.0

                        232
                      • UNIX

                        232
                    • • AppleTalk

                      232
                      • • AppleTalk

                        232
                      • MacOS 7.1 or greater

                        232
              • <TABLE ROW>

                232
                • SNMP

                  232
                • MIB-II, PrinterMIB, HostResourceMIB

                  232
    • INDEX

      233
• RICOH-SCRIPT2 Type204

  234
  • How to Read this Manual

    238
    • Symbols

      238
  • Table of Contents

    239
  • Getting Acquainted

    242
    • Getting Acquainted with RICOH-SCRIPT2 Type204

      242
      • Unpacking the RICOH-SCRIPT2 Type204

        242
      • About the CD-ROM

        242
      • Installing the RICOH-SCRIPT2 (DIMM) To Your Printer

        244
    • Features of the RICOH-SCRIPT2

      245
    • Printing with the RICOH-SCRIPT2

      246
    • Operation Panel

      247
    • Messages on the Operation Panel

      249
  • 2. Using RICOH-SCRIPT2 with Windows

    250
    • Before Installing RICOH-SCRIPT2

      250
      • RICOH-SCRIPT2 Printer Drivers for Windows 95/98/NT4.0

        251
      • Operating Environment

        251
    • Using RICOH-SCRIPT2 with Windows 95/98

      253
      • Installing the Printer Driver

        253
      • Setting Up Options

        254
      • Accessing the Printer Properties

        255
      • Printer Properties' Tabs and Their Settings

        256
    • Using RICOH-SCRIPT2 with Windows NT4.0

      260
      • Installing the Printer Driver

        260
      • Setting Up Options

        262
      • Accessing the Printer Properties

        263
      • Printer Properties' Tabs and Their Settings

        264
      • Default Document Properties' Tabs and Their Settings

        266
    • Using Adobe PageMaker version 6.0 or 6.5

      269
      • Installing the PPD Files

        269
      • Selecting the PPD Files

        269
    • Windows Headers

      270
      • Sending Header Data

        270
    • Windows Network Environment

      271
  • 3. Using RICOH-SCRIPT2 with Macintosh

    272
    • Before Installing RICOH-SCRIPT2

      272
      • RICOH-SCRIPT2 Printer Drivers for Macintosh

        273
    • Installing the PPD Files

      274
      • Operating Environment

        274
      • Installing the PPD Files

        274
    • Installing the ColorSync™ Profiles

      275
      • ColorSync™ Profiles

        275
      • Installing the ColorSync™ Profiles

        275
    • Setting Up the PPD Files and Options

      277
      • Setting Up PPD File

        277
      • Setting Up Options

        277
    • Setting Up for Printing

      279
      • Making Paper Settings from an Application

        279
      • Setting Up for Printing from an Application

        279
      • LaserWriter 8.3x or Earlier

        280
      • LaserWriter 8.4x or Later

        281
    • Installing Screen Fonts

      284
      • About Screen Fonts

        284
      • Installing Screen Fonts

        284
  • 4. Appendix

    286
    • Troubleshooting

      286
    • Making Printer Settings with the Operation Panel

      290
      • Selecting the Printer Language

        290
      • Setting Menus

        291
      • RPS2 Menu

        292
      • RPS2 Menu Table

        295
      • Printing the Configuration Page

        296
      • Interpreting the Configuration Page

        297
    • Printer Memory and VM Area

      298
    • Precautions for RICOH-SCRIPT2

      299
  • INDEX

    300