Краткое Руководство По Установке для Ricoh ap204

NetWare Configuration

26

Using the NIB Setup Tool, you can easily set up a NetWare printing environ-
ment after physically installing the Network Interface Board into the printer,
You can select 

 or 

 as an installation method.

When you configure the Network Interface Board for the first time, use the Wiz-
ard method.

❒ When the Wizard method is used, the Network Interface Board is configured

to work as a Print Server. To configure it as a remote printer, use the Property
Sheet method. For more information, refer to P.29 “NetWare 3.x Configuration”
and P.35 “NetWare 4.x Configuration”.

❒ This section assumes that NetWare is functional and that the necessary envi-

ronment for the NetWare Print Services is available.

A

B

C

The Browse dialog of the Network Interface Board appears.

D

E

If you don't know which Network Interface Board you are configuring, print
the Configuration Page using the printer's operation panel, and select the
MAC address that is on the page.

F

G

The factory default is RNP followed by the last 3 digits of the MAC address.
We recommend that you change it to something that is easier to remember or
something based on the structure of your network.

H