Краткое Руководство По Установке для Ricoh ap204
NetWare Configuration
38
3
O
Create a print server as follows.
A Select the context specified using the NIB Setup Tool (Step HHHH-C
A Select the context specified using the NIB Setup Tool (Step HHHH-C
C
C
C), and in
the
[Object]
menu, click
[Create]
.
B In the
[Class of new object]
box, click “Print Server” to highlight it, and
click
[OK]
.
C In the
[Print Server name]
box, input the name of the print server.
Important
❒ Use the same name as that specified using the NIB Setup Tool. (Step
H-
A).
D Click
[Define additional properties]
to place
'''' mark, and click
[Create]
.
P
Assign the printer to the created print server as follows.
A Click
A Click
[Assignments]
, and click
[Add]
in the
[Assignments]
group.
B In the
[Available objects]
box, click the queue created in the step
LLLL to high-
light it, and click
[OK]
.
C After confirming the settings, click
[OK]
.
Q
Turn the printer power off and on.
Note
❒ To confirm if the printer is configured correctly, enter as follows from the
command prompt.
F:> NLIST USER /A/B
❒ If the printer works as configured, the name of the print server appears as
an attached user.
Setting Up as Remote Printer
Important
❒ You should use the NDS mode when setting up as a print server in NetWare
4.x.
A
Log in to the print server as Admin.
B
Run the NIB Setup Tool.
Reference
C
Click
[Property Sheet]
and click
[OK]
.
The Browse dialog of the Network Interface Board appears.
D
Click
[IPX network board]
.