Краткое Руководство По Установке для Ricoh ap204
Appendix
80
6
Message List
This is a list of messages recorded to the the printer's sytem log. The system log
can be viewed using the the syslog command.
can be viewed using the the syslog command.
System Log Information
You can use the following methods to view the system log.
• UNIX : Use the syslog parameter of rsh, rcp or ftp
• UNIX : Use the syslog parameter of rsh, rcp or ftp
• mshell : Use the syslog command
Message When the Network Interface Board Starts or Restarts.
RICOH NIC Ver.x.x.x
Version number of the Network Interface
Board.
Board.
PRINTER SYSTEM “system name”
Ver.x.x.x
Ver.x.x.x
System name and version of the printer.
Attach FileServer=“file server name”
Your Printer is attached to “file server
name” as the nearest server.
name” as the nearest server.
Current Interface Speed:xxxMbps
Shows the speed of the network (10 Mbps
or 100 Mbps).
or 100 Mbps).
Current IPX address
You can print from a client on the Win-
dows network via the print server.
dows network via the print server.
Frametype=“frame type name”
The "frame type name" is configured to be
used on NetWare.
used on NetWare.
NetBEUI Computer Name=“computer
name”
name”
The NetBEUI Computer Name is defined
as "computer name".
as "computer name".
Start httpd
Start npmpd for IPX
The npmpd for IPX protocol has been
started.
started.
Start npmpd for TCP/IP
The npmpd for TCP/IP protocol has been
started.
started.
Start smbd direct print mode(NetBEUI)
You can print from a client on the Win-
dows network via the print server.
dows network via the print server.
Start snmpd Ver.2.0
The SNMP agent of the displayed version
has been started.
has been started.
Vendor= , Country= , Lang=
.