Краткое Руководство По Установке для Ricoh ap204

Message List

83

❖

❖

❖

❖

Can't build data connection: “message”

Cannot establish a connection for data 
transfer due to the displayed error. Check 
the ftp of the workstation that requested 
the print job, and start it again. When us-
ing ftp, this message remains only on the 
system log information. 

cmd_name:Command not supported

The remote shell command using cmd-
namd is not supported. You should use 
only the print, stat, status, syslog, info, 
and prnlog commands. You should access 
the printer only with rsh and rcp remote 
shell commands.

command line too long

The command line is too long.

file_name:No such file or directory

You must use a file name with the stat, 
status, syslog, info, prnlog, and install 
commands.

filter data error

Some of the data cannot be handled by the 
filter option. Confirm the file code and the 
settings of the filter option.

get log busy

Other machine is getting the log informa-
tion. You should get it afterwards.

lost connection

The connection was cut by a counterpart. 
Check the ftp of the workstation that re-
quested the print job, and start it again. 
When using ftp, this message remains 
only on the system log information. 

no more ftp execute

More than 3 users cannot log in using ftp 
at a time. Since there are 3 other users that 
have already logged in, wait until the job 
is finished.

print requests full

Cannot accept the print request.(max. 5 
sessions)  Confirm the status of the printer 
with lpq, rsh, rcp, and ftp commands, and 
print it again after the number of print re-
quests (sessions) becomes less than 5.

printer busy

Cannot get the printer information. An-
other user may be accessing it. Wait a few 
minutes before trying again.

printer permission denied

Cannot get a permission to use the print-
er. Confirm the access right with the ac-
cess control address and the access control 
mask.