Руководство Пользователя для Ricoh AP400

Remote Maintenance by telnet

119

Reference
For more information about AutoNet, see p.140 “Using AutoNet”.

The printer clock can be synchronized with a NTP server clock using the Simple
Network Time Protocol (SNTP). To change the SNTP settings, use the sntp com-
mand. Confirm with the network administrator that the NTP server settings are
correct.

❒ SNTP supports the NTP servers running xnptd V3 and V4.

❖

❖

❖

❖ Reference

❖

❖

❖

❖ NTP Server Address Configuration

You can specify the IP address of the NTP server.
msh> sntp server IP_address

❖

❖

❖

❖ Interval Configuration

You can specify the interval at which the printer synchronizes with the oper-
ator-specified NTP server.
msh> sntp interval polling_time

❒ The factory default setting is 3600 seconds.
❒ You can set the interval from 16 to 16384 seconds.
❒ If you set 0, the printer synchronizes with the NTP server only when you

turn the printer on. After that, the printer does not synchronize with the
NTP server.

❖

❖

❖

❖ Time-zone Configuration

You can specify the time difference between the printer clock and the NTP
server clock.

msh> sntp timezone +/-hour_time
Example: To set the time-zone difference to +8 hours:

❒ The time is in 24-hour notation.