Руководство Пользователя для Ricoh AP400
Remote Maintenance by telnet
121
7
❖
❖
❖
❖ DNS server configuration
The following command enables/disables use of the DNS server address:
msh> dns number server / server address
The following is a sample configuration using an IP address of 192.168.15.16
on DNS 1 server:
The following is a sample configuration using an IP address of 192.168.15.16
on DNS 1 server:
msh> dns 1 server 192.168.15.16
• You can register up to three DNS server numbers.
• You cannot use “255.255.255.255” as the DNS server address.
• You cannot use “255.255.255.255” as the DNS server address.
Domain name
Use the "domainname" command to display or configure domain name settings.
You can configure the Ethernet interface, IEEE 1394 interface, or IEEE 802.11b in-
terface.
You can configure the Ethernet interface, IEEE 1394 interface, or IEEE 802.11b in-
terface.
❖
❖
❖
❖ View setting
The following command displays the current domain name:
msh> domainname
❖
❖
❖
❖ Interface domain configuration
The following command displays or sets the Ethernet interface domain name,
IEEE 1394 interface, or IEEE 802.11b interface.
IEEE 1394 interface, or IEEE 802.11b interface.
msh> domainname / interface_name
The following is a sample configuration using a domain name on the Ethernet
interface:
The following is a sample configuration using a domain name on the Ethernet
interface:
msh> domainname ether
*1
Available when the optional 1394 interface board is installed.
*2
Available when the optional 802.11b interface kit is installed.
Note
❒ A domain name can consist of up to 63 alphanumeric characters.
Interface
Interface that can be set
ether
Ethernet interface
ip1394
IEEE 1394 interface
wlan
IEEE 802.11b interface