Справочник Пользователя для Haier dwe-270

Please  install and adjust the machine according to the requirement of  the manual. 
It  is very  important  to your security  and  correct operating  the machine.

The drainage shall be smooth with  the drain hose.

Installation and adjustment

(about 46L)

High

High

(about 55L)

   Low

   Low

(about 36L)

Medium

 Medium

    Adjust the water level adjusting 
   lever to desired water level line.

Water inlet hose

 Water-filling

   entrance

   Water level

 adjusting lever

4.If  extra  drain  hose is  needed ,  the  inner
   diameter  of  the  extra hose  shall  not less
   than 30mm, and the length shall not exceed
   1.5m.

<10cm

>   30mm

<1.5m

1.The  height   of  the drain  hose  shall be
   less  than  10cm ,  or   the  drainage  will
   not  be  smooth  enough  and  cause
   incomplete  drainage.

2.Do not step on  or  press  the  drain hose.

3 If the drain hose is too long, cut it at mid
   point. To make smooth drainage, cut the 
   front end of the hose slantingly.

Insert the water inlet hose into the water-filling
entrance on the control panel directly.   (pull it 
out to dismantle it)

Select water level according to the 
quantity of the laundries.

Attention:
       In water filling, do not exceed 
the"High"  water level.   Otherwise
the water  may overflow out of the 
washing machine.

Lint filter

 Filter frame

 After opening the package,please take out the lint filter from 
the document bag,install it to the filter frame of the
 cabinet.See to the figure.