Справочник Пользователя для Haier dwe-270

 Figure 1 indicates the ex factory
 installation position of the drain
 hose.

Then hang the drain hose into the hanging
 hole at the spin tub side. (As per Figure 5).

Take  out  the drain hose from the  fixing
hook. Extend it from the rear side (When
the drain hose is extended from the rear
side, it can be hung on the point for drain
 hose at the two sides of the cabinet.)
(See to Figure 6).

Take off the drain hose from the hanging
hole of  the cabinet.   Pull the drain hose
fixing  hook outwards  gently  to take out 
the  drain hose from the two fixing hooks.
(As per Figure 2)

Rotate the drain hose fixing hook for 90
to take it  out  from the installation  hole
(As per Figure 3).

Install  the  two  drain hose
fixing  hooks taken out into 
the installation  hole  at the 
other side of the base frame
 (to aim at the  installation 
hole  accurately   you  can
lean  the washing machine
forward slightly).Then rotate
for 90 (As per Figure 4).

Pull the fixing hook outwards slightly.
Inlay the drain hose into the fixing hooks
reliably along the groove at spin tub side,
and make it extend towards spin tub side.

Figure 6

Figure 5

Figure 4

Figure 2

Figure 1

Figure 3

 Drain hose

 fixing hook

 Drain hose

 fixing hook

Pull outwards

slightly

Fixing hook

installation hole

Drain hose

Take off

the drain hose

Rotate the fixing

 hook for 90

Rotate the fixing

 hook for 90

Insert the fixing hook into the

installation hole upwards

 Take off the fixing

 hook downwards

to fix it