Руководство По Установке для Nortel 4000
1-2
300275-D Rev. 00
Nautica Modules Installation Guide
Opening the Nautica 4000
After you have removed all network, ISDN and power cables
from the back of the Nautica 4000, remove the lid of the unit by
doing the following:
from the back of the Nautica 4000, remove the lid of the unit by
doing the following:
1.
Unscrew the thumbscrews located on the back panel of
the Nautica 4000 (
the Nautica 4000 (
).
Figure 1-1.
Thumbscrews on the Nautica 4000 Back
Panel
Panel
2.
Slide the lid of the unit about one inch towards the back
of the unit, and then lift off the lid.
of the unit, and then lift off the lid.
Figure 1-2.
Removing the Lid
3.
Insert the relevant module referring to the relevant
chapter in this manual for instructions.
chapter in this manual for instructions.