Руководство Пользователя для Nortel 4000

Managing Remote Access Concentrators Using Annex Manager

Chapter 4    Setting Up RACs

4-26

The

Authorized Groups

 field specifies the LAT protocol remote group codes

that are accessible to users on a RAC port. You can enter all, none, a series
of numbers separated by commas (e.g., 1, 5, 7) or a range of numbers
separated by dashes (e.g., 1, 5, 200-255). You can use any number
between 0 and 255.

The

 Edit Modem

 window lets you change an existing modem definition for

any RAC and create a new definition or remove definitions from for RACs
other than ISDN Primary Rate RACs.

The

Edit Modem

 window uses the following fields:

•

The

Modem Name

 field specifies the type of modem attached to

the ports you selected. For RACs with asynchronous ports, this
field automatically displays the name that appears in the

Edit

Async Port

 window's

Modem Name

 field. For ISDN Primary Rate

RACs, it displays the name of the internal modems from the
RAC configuration file.

•

If this field displays an existing modem name, the

Connect

Status String, Dialin Setup Command

, and

Dialout Setup Command

fields display current values. If you change values for a modem
that exists in an include file, Annex Manager copies the file and
place your new definition in the RAC configuration file.

•

If this field displays

 <undefined>

 or is blank, Annex Manager

provides default values in the

Connect Status String, Dialin Setup

Command

, and

Dialout Setup Command

 fields. You can use these

default values or enter new values.

If you want to view or edit a definition for a different modem
than the one that appears in the window, click

OK

 here and select

another name from the

Modem Name

 list. If the

Edit Modem

window first appears with a modem name and you change it to
an existing name, the

Connect Status String, Dialin Setup Command

and

Dialout Setup Command

 fields will not automatically display

current values for the name you entered. If you click

Apply

 at

this point Annex Manager changes the definition for the name
you entered to the original

Modem Name

 values.